User Manual Part 2

8.1.7 Detour Options
The Magellan CrossoverGPS 3150 comes equipped with SmartDetour. If
you are driving on the freeway with SmartDetour enabled and your speed
drops below 15 MPH, you may press the detour icon on the Map screen in
order for the Magellan CrossoverGPS 3150 to calculate an alternate route
around traffic.
Select Detour Options.
Select the distance of the detour. You can select from a preset distance of
three miles, five miles, or 10 miles.
You can also select a custom distance. Select Custom, and then select
the button to the right to enter a custom distance.
Enter the number of miles and select OK.
Next, select the amount of time the Magellan
CrossoverGPS 3150 will wait before alerting you.
Select the Time button.
Enter the number of minutes and select OK.
Enable Automatic Detour is selected by default as
shown by the checkbox mark. To disable
automatic detour, deselect Enable Automatic
Detour..
When you have finished, select Save.
Chapter 8: Navigation Options
When you encounter traffic, and the set time has
elapsed, the Detour icon will flash on the Map
screen. Touch the icon on the screen to have the
Magellan CrossoverGPS 3150 calculate the detour.
You can choose to ignore the Detour alert; and after
one minute it will stop flashing until the set time has
elapsed again when it will alert you once more.
8.1.8 Menu Colors