User Manual Part 2

Magellan CrossoverGPS 3150 where you are and will speed up the
satellite signal acquisition. Make sure you first select the country you
are in by pressing the Globe button on the Destination screen (see
“Country Selection (Globe Button)” on page 25). Select Set GPS
Position.
Enter the first few characters of the city name (see
“Inputting Text Characters” on page 13). Select OK.
Use the Navigation key to scroll the list up or down (if
necessary) and select the desired city.
Enter the street name (see “Help with Address Entry”
on page 15). Select
OK. Use the
Navigation key to scroll the list up or down (if necessary) and select the
desired street.
Enter the street address. The acceptable range of numbers is displayed at the
top of the screen. If you do not know the exact address, just select Done and
the Magellan CrossoverGPS 3150 will use the lowest number in the range.
Select Done to continue. You will be returned to the Configuration menu.
Go to the Map screen. Your current position is now set to the address you
entered.
8.1.11 Simulator Mode
In Simulator Mode, you can demonstrate the capabilities of the Magellan
Maestro 3100/3140 without actually driving. In order