User Manual Part 2

12.1 Installing the Software
Insert the Magellan Maestro Tools PC Application CD into your PC’s CD
drive.
The setup application will begin automatically. If it does not, browse your
computer’s CD drive and double-click on the setup.exe file.
Select a default language for the Application.
The Welcome screen will appear to begin the installation process.
Choose a destination for the application. Select Next to use the default
location, or select Browse to choose a custom destination. Next, choose a
Program Folder to place the application icons.
The Magellan Maestro Tools software will be installed. After it has finished
installing, a dialog box pertaining to Microsoft DIgital Signatures may
appear, select OK
When it has finished, to can have the installer launch the application
automatically, or deselect to exit without launching the application. Select
Finish.
The Magellan Maestro Music Manager enables you to transfer song files in
MP3 or WMA format from your computer to an optional memory card (see
“Using Removable Memory Cards” on page 9) installed in your Magellan
CrossoverGPS 3150. The amount of music you can load depends on the size
of the card.
Insert the memory card into the memory card slot as show on page 9. Turn
on your Magellan CrossoverGPS 3150 by pressing and holding the Power
button for approximately 2-3 seconds if in sleep mode. (Ten seconds if not
in sleep mode.) When the Warning screen appears, insert the small end of
the USB cable into the USB port on your Magellan CrossoverGPS 3150
and the large end into an available USB port on your computer.