User Manual Part 2

13 63 N Second Page Heading 0 Speed 0.0 m/s
Current Lat: 34.10939 N Current
Long:117.82599 W GPS Version: Current
altitude 255 TTFF 116s #Satellite (U/T) 11/12
PDOP 2.3 VDOP 1.7 TTFF 0.0 HDOP 1.3 FOMS
P/V/H 2 UTC TIME 08/16/2004 22:56:53
Appendix Frequently Asked Questions
Why is my street not showing up on the map?
The Magellan CrossoverGPS 3150 uses the most current available
map data. Chances are, your street is in a new housing development
or the street is new. Map updates may be made available once per
year.
I know there is a gas station on this street corner, why is there not icon
for it on the map?
Check your POI settings and make sure you have the necessary POI
checked to make it visible on the map. See “POI Selection” on page
55.
The Magellan CrossoverGPS 3150 uses the latest POI data available.
Chances are the POI you are looking for is relatively new and has
not been added to the database. If this is not the case, it may have
been overlooked or changed since the POI database was created. You
can add custom POIs to your Magellan CrossoverGPS 3150 to make
up for those you route to often. See “Chapter 17: Magellan Maestro
POI Manager” on page 112., and “Custom POIs” on page 55.
The GPS signal is weak. What’s going on?
You may be driving through an area that has tall buildings or trees,
or a canyon, or a tunnel. These conditions may interfere with satellite
signals. Wait a few moments and the signal should get better as more
satellites are acquired. If the problem persists, there may be a
problem with the antenna. Contact Technical Support.
Why is an address I know I routed to not in the Previous Destinations list?