User's Manual

22 23
Technical Support
The EZ4Media website,
www.ez4media.com, contains the latest
user documentation, software updates
and technical support information for
EZfetch and other EZ4Media products.
Supported Multimedia
Formats
For detailed information about
supported formats, go to
www.ez4media.com/downloads and
select EZfetch Supported Formats PDF.
Picture:
BMP, GIF, JPEG, PNG
Music:
AAC+, AAC-LC, LPCM, MP3, MP3Pro, WMA,
WMAPro
Movie:
DivX 3, DivX 4, DivX 5 HD,
DivX 5 SD, DivX 6 HD, DivX 6 SD,
H.264 AVC MPEG4 part 10 HD,
H.264 AVC MPEG4 part 10 SD, MPEG-1,
MPEG-2 HD, MPEG-2 SD, MPEG-2 VOB,
MPEG-4 part 2 ASP, Quicktime (3GPP),
VC-1 HD 720p, VC-1 HD 1080i, WMV 7,
WMV 8, WMV 9, WMV Pro, WMV HD 720p,
WMV HD 1080i, Xvid
Specifications
Network
Wireless: 802.11 b/g
Wired: 10/100 Mbps Ethernet
Wireless Security
Up to 128-bit WEP
WPA-PSK/WPA2-PSK Encryption
Compliancy Standards
UPnP AV v1.0
DLNA v1.5
UL, CE and FCC
USB
High-speed 2.0
Supported OS
Windows XP and Windows Vista
Connections
LAN RJ45
DVI-D (DVI-D to HDMI Adapter included)
S-Video and RCA Composite Video
RCA Left and Right Analog Audio
and S/PDIF Digital Audio
USB
Power
EU/USA/UK changeable plug
100-240AC/50-60hz
18w consumption
Approximate Physical
Specications
7.5 W x 1.5 H x 7 D inches
190.5 W x 40 H x 178 D millimeters
1lb. 3oz./.55 kg
Warranty
Complete warranty information is available at
www.ez4media.com.
Trademarks
EZfetch is a trademark of EZ4Media, Inc. Microsoft and
Windows are trademarks or registered trademarks of Microsoft
Corporation. SimpleCenter is a trademark of Universal
Electronics, Inc. Other brand and product names are registered
trademarks or trademarks of their respective holders.
Statement of Conditions
In the interest of improving internal design, operational function,
and/or reliability, EZ4Media reserves the right to make changes
to the products described in this document without notice.
EZ4Media does not assume any liability that may occur due
to the use or application of the product(s) or circuit layout(s)
described herein.
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Modications: Any changes or modications not expressly
approved by the grantee of this device could void the user’s
authority to operate the device.