User's Manual

10 11
Wired:
Ethernet Connector (LAN RJ45)
Plug the supplied Ethernet cable into the
LAN port on EZfetch and plug the other
end into a router, hub, or switch on your
network.
Wireless: Antenna
Attach the supplied wireless antenna to
EZfetch by threading it onto the antenna
connector. Be sure the antenna is secure
and in an upright position.
Power Connection
DC Power Supply Cord
Plug the power supply cord into the DC IN
jack on EZfetch and plug the end with the
EU/USA/EK changeable plug into a power
outlet.
DVI-D/HDMI
Plug the supplied DVI-D cable into the
DVI-D input on EZfetch and the matching
opposite end of the cable into the DVI
input on your television or audio/video
system. If you want to connect to HDMI
input on your television or AV receiver,
use the supplied DVI-D/HDMI adapter.
Note: An HDMI cable does not carry an audio
signal. You will need to use analog audio or optical
audio for the system to work properly.
S-Video
Plug a standard S-Video cable into
EZfetch’s S-VIDEO jack and the matching
opposite end into your television.
Note: This cable is not supplied.
Composite Video
Plug the supplied RCA cable into EZfetch’s
yellow COMPOSITE jack and the matching
opposite end of the cable into either
your TV or your AV-receiver as auxiliary
AV input. If your TV has a SCART input
(European), use the supplied RCA/SCART
adapter.
Video Connection
EZfetch can connect to your television via
DVI-D/HDMI (digital), S-Video or composite
video. Based on the type of television
you have, select one of the three ways to
connect EZfetch and your television.
Network Connection
The connection between EZfetch and
your home network can be wired or
wireless. Select one of the two ways to
connect EZfetch to your home network.