User Manual

32
Accept a Bond
1. Make sure that Bluetooth is turned on and in discoverable mode.
2. When prompted to bond with the other device, tap Yes.
3. In PIN, enter a PIN of between 1 and 16 characters, and tap Next. You
must enter the same PIN that was entered on the device requesting the
bond.
4. If you want, in Name, edit the name of the device requesting the bond.
5. Tap Finish.
The bond is created. You can now exchange information with the
other device.
Rename a Bond
1. Tap > Settings > Connections tab.
2. Tap Bluetooth > Bonded Devices tab.
3. Tap the bond to rename.
4. In Name, enter a new name for the bond.
5. Tap Finish.
Delete a Bond
1. Tap > Settings > Connections tab.
2. Tap Bluetooth > Bonded Devices tab.
3. Tap and hold the bond to delete.
4. Tap Delete.