User's Manual

11
Chapter 3 Using the USB Dongle and
Wireless Hub
After successfully installing the drivers for the USB dongle and wireless hub,
you can start communicating with other USB devices wirelessly. The
Connection Manager icon appears on your Windows system tray. The following
table shows the icon color and the corresponding activity status:
Please Note: In compliance with 47 CFR 15.519(a)(1) the wireless
dongle and /or hub will cease transmission within 10 seconds
unless it receives an acknowledgement from the other that its
transmission is being received. An acknowledgment of reception
must continue to be received by the wireless dongle and / or hub at
least every 10 seconds or the UWB device will cease transmitting
until it receives acknowledgement. This may cause some
additional delay in operation when first associating the dongle and
hub if hub is out of range of dongle or power is applied to hub after
10 seconds of dongle connection.
Icon Color Status
Enabled (yellow icon)
The USB dongle is connected to the computer and enabled
but no wireless connection is detected.
Connected (green icon)
The USB dongle is connected to the computer, is enabled,
and is associated with the wireless hub.
Disabled (gray icon)
The USB dongle is not connected to the computer or, is
connected to the computer but is disabled.