User's Manual

Getting Started 1-7
1.2 Installing the SIM Card and Battery
After applying for an account with a mobile phone service provider, you will
be provided a SIM (Subscriber Identification Module) card. This card
contains your mobile phone account details, contacts that can be stored and
any additional services to which you have subscribed.
You must install a SIM card before you can use the phone feature.
1. Slide the back cover slightly, and then lift it off the device from the
bottom edge.
2. The SIM card holder is on the bottom right corner. Slide the SIM card
into the holder (note the orientation of the card). Make sure that the SIM
card fits properly into the slot.
3. With the CE logo on its label facing outside, match the battery’s
projected parts with the holes in the battery compartment, insert the
battery at an angle, and then fit it into the compartment.
DO NOT use screwdrivers or metallic tool edges to extract the battery
from the device as they may damage and irreversibly alter the battery’s
behavior.
4. Replace the back cover.