N630 User Manual
Revision: R00 (October 2019) Trademark All brand and product names are trademarks or registered trademarks of their respective companies. Disclaimer Specifications and documents are subject to change without notice. Note Not all models are available in all regions. Not all features are available on all models. Depending on the specific model purchased, the colour and look of your device and accessories may not exactly match the graphics shown in this document.
Table of Contents Device Basics ................................................................................................................... 4 Getting to Know Your Device ................................................................................ 4 Installing and Charging the Battery Pack .............................................................. 4 Using a Micro-SIM Card ........................................................................................ 6 Using a Memory Card............
Device Basics Getting to Know Your Device ❶ Barcode reader ❿ Battery cover ❷ Accessory screw hole ⓫ Microphone ❸ Rear camera lens and flash LED ⓬ Charge indicator ❹ USB Type A port ⓭ Front camera lens ❺ USB Type C connector ⓮ Power button* ❻ Power jack ⓯ Volume buttons ❼ VESA mounting hole ⓰ Touch screen ❽ Battery cover latch ⓱ NFC sensor ❾ Speaker ⓲ Dock connector *Depending on the model, this button may be barcode reader button.
❶ ❷ ❶ 4. Install the connector side of the battery pack into the battery compartment first (❸), and then place the other side of the battery pack into the compartment (❹). ❹ ❸ 5. ❹ Align the triangular mark on the battery cover with the triangular mark on the device (❺), and then close the battery cover properly (❻). When closing the battery cover, make sure that the cover fits properly on all corners so that the O-ring is seated properly into the groove to achieve waterproof performance.
Using a Micro-SIM Card Depending on the model, your device may use a Micro-SIM card. 1. Remove the battery cover. (Follow the steps in the “Installing and Charging the Battery Pack” section.) 2. Remove the battery pack out of the battery compartment. 3. Locate the Micro-SIM card slot (as shown in the illustration). With its label side facing the front side of the device, hold the Micro-SIM card by the edges and gently insert it into the slot.
To remove the card, first unmount it from the device: A. Slide up from the bottom of the Home screen and tap Settings. B. Tap Storage C. Then gently push the top edge of the card inwards to release it, and pull it out of the slot. .. 4. Replace the battery pack and the battery cover. (Follow the steps in the “Installing and Charging the Battery Pack” section.) Do not apply pressure to the center of the memory card. Inserting the card in the reverse direction may cause damage.
To resume the screen, press the Power button briefly and then unlock the device by dragging the Lock icon ( ) upwards. Aeroplane Mode When you are in an aeroplane or in the area where data transferring is not allowed, enable Aeroplane mode. You will be able to use many of your device's applications, but all wireless radios, including wireless networks and Bluetooth, on the device are turned off – it cannot send or receive data. To enable Aeroplane mode: 1.
Getting Started Using the Touch Screen To operate your device, touch the screen with your finger. You can perform the following actions: Tap: Touch the screen once with your finger to open items or select on-screen buttons or options. Tap and hold: Tap and hold on the desired item to open the pop-up menu that contains the available options for the item. Drag: Tap and hold on the item and then move it to the target position without releasing your finger.
Home Screen The Home screen is your starting place for tasks, providing quick access to frequently used applications and settings. To display the app list, swipe up from the bottom of the screen with one finger. To display the Home screen, tap at any time. Google, Google Play, YouTube and other marks are trademarks of Google LLC. Your Apps To see all your apps, slide up from the bottom of the Home screen with one finger to open the app drawer.
Customising Your Device You can easily customise the device for personal settings through the Settings menu, such as personalising the Home screen, changing the display and sound settings, configuration the connection settings, and more. To access the Settings menu, slide up from the bottom of the Home screen and tap Settings. Cellular Data Connection This feature is not available on all models. To use cellular services, you must have a subscription to the function with a mobile phone network service.
Turn off the WIFI function when not in use to save battery power. Removing a Remembered Network 1. Slide up from the bottom of the Home screen and tap Settings. 2. Tap Network & internet WIFI. 3. Tap and hold the network to remove on the list, and select FORGET. Bluetooth Bluetooth is a short-range wireless communications technology that allows Bluetooth-enabled devices to exchange information over a distance of about 30 feet (10 metres) without requiring a physical connection.
Reference Caring for the Device Taking good care of your device will ensure trouble-free operation and reduce the risk of damage to your device. Keep your device away from excessive moisture and extreme temperatures. Avoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of time. Do not place anything on top of your device or drop objects on your device. Do not drop your device or subject it to severe shock.
FCC Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radars are allocated as primary users (i.e.
AT BE BG HR CY CZ DK EE FI FR DE EL HU IE IT LV LT LU MT NL PL PT RO SK SI ES SE UK The DoC letter will be added to the end of the manual. RF Exposure Information (SAR) This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits are 1.
About the Charger Do not use the charger in a high moisture environment. Never touch the charger when your hands or feet are wet. Allow adequate ventilation around the charger when using it to operate the device or charge the battery. Do not cover the charger with paper or other objects that will reduce cooling. Do not use the charger while it is inside a carrying case. Connect the charger to a proper power source. The voltage requirements are found on the product case and/or packaging.