User's Manual

 Do not apply pressure to the center of the memory card.
 Inserting the card in the reverse direction may cause damage.
 The manufacturer does not guarantee the product's compatibilities with the storage cards from all manufacturers.
 If you encounter access problems with your memory card, please visit the website
https://www.sdcard.org/downloads/formatter_4/ and use the "SD Memory Card Formatter 5.0 for SD/SDHC/SDXC" tool to
format your memory card.
Using the Cradle
Depending on your model, a cradle and/or a mount may be provided for your device. Follow the
illustrations to mount your device.
 The Micro-USB connector on the cradle is intended only for charging, not for data transfer.
Installing the Cradle
1. Line up and connect the dock connector on the cradle to the dock connector on the device. Magnets
are incorporated to ensure proper alignment.
2. If needed, you can secure the device to the cradle with 2 screws.
Removing the Cradle
1. Remove the 2 screws (if installed) securing the device to the cradle.
2. While pressing and holding the release button on the cradle, pull the top of the device away and lift
the device out of the cradle in an upward motion.