Installation manual

ADPRO
®
FastTrace™ 2 Series Hardware Installation Manual
21790_05 101
23 FastTrace 2 Web Pages
There are several web pages to consult with the FastTrace 2. To open these web pages in your internet
browser you need to type the IP address in the address bar, followed by the extensions as described in the
table below.
Web page
Description
index.php
This is the main page of the FastTrace 2. If the client has been installed, this page
automatically opens the XOa client application (see the XOa Client Software User Manual).
If the application has not yet been installed, you will be redirected to the setup page
(setup.php).
setup.php
On this page you can download the XOa client application (see the XOa Client Software
User Manual).
tools.php
This page contains the links to the internal logging, the core dump and the network trace:
log.php
Here you can download the log files (see Retrieving Traces on page 97).
report.php
Here you can consult essential information on the configuration.
core.php
Here you can download the core dump (crash info) and watch dump (hang info) when you
encounter these specific problems. The Xtralis Support Division may ask you to send these
files to them for further investigation. Always mention the version when providing a core
dump!
phpshell.php
This is a Linux console through a web browser. You need a username and password to
use this tool. This is by default only accessible for the Xtralis Development Team.
net.php
Here you find a network sniffer for network tracing. This comes in handy to check why a
certain client cannot connect to the FastTrace 2 server.