Technical Specifications

CCaappss && BBaasseess
1-800-
3
2
8-5
9
34 • www.USPconnectors.com
66
© Copyright 2007 USP Structural Connectors
®
H
L
W
1
Options: All nominal lumber sizes are available for rough/full size lumber.
KCC44, KCC46, KCC64, KCC66, KECC44, KECC46, KECC64, &
KECC66 are available in Hot-dip galvanized. To order, add
HDG to
s
tock number, as in
K
CC44-HDG
.
S
peciality Options:
• For end column caps, add an E after the K in the stock number, as in KECC325-4.
• Straps may be rotated 90° on special order where the W2 dimension is less than or
equal to the W1 dimension.
• KCCO/KECCO – Cap only, no strap design for field welding to pipe or other columns.
• KCCOB – For cross beam connections. Any two buckets can be welded together for
a wide variety of applications. Allowable load shall be the lesser of the two components.
•
KCCT – For T beam intersections, consult USP. Specify beam/column conditions,
dimensions, and loading requirements.
• KCCC – For X beam intersections, consult USP. Specify beam/column conditions,
dimensions, and loading requirements.
• KECCLL/R – For L beam intersections, consult USP. Specify left
(L) or right (R)
beam/column conditions, dimensions, and loading requirements.
Dimension call-outs not shown in the table must be specified at time of ordering
for specialty options, non-catalog, or rough/full size lumber sizes.
4˝
Typ.
W
1
L
H
1
H
2
H
3
W
2
W
3
W
4
KCCC
E = 1
3
/
4
˝ unless
otherwise specified
Optional KECC
Rotated Straps 90°
L
H
1
H
2
W
1
W
2
W
3
4˝ Typ.
KECCLL
left shown
KCCO
L
2
L
1
W
2
H
2
H
1
KCCOB
Top View of Specialty Options Column Cap Configurations
Column Caps – KCC & KECC series continued
W
1
W
2
H
1
W
3
H
2
L
KCCT
KECCLL
rotated 90° left
KECCLR
rotated 90° right
left
right
KCC
offset left
KCC
offset right
KECC
offset left
KECC
offset right
KECC
rotated 45° left
KECC
rotated 45°
right