Technical Specifications

Angles & Straps

Typical MP

rafter support installation

Typical MP

installation

Typical JA1

installation

JA3JA1

Typical JA7

installation

Typical AC

installation

Typical A3

installation

A3AC

A3 / AC / JA / MP Framing Angles

Angles & Straps

MP – 18 gauge. Field adjustable from 0° to 135°.

A3 – 18 gauge. Eliminates toenailing and increases strength.

AC – 16 gauge. Features staggered nail patterns which

reduces wood splitting and allows installation on both

sides of the supported member.

JA – 14 or 16 gauge. Heavier capacity framing angle

for joist support.

Materials: See chart

Finish: G90 galvanizing

Options: See chart for Corrosion Finish Options

Codes: See page 11 for Code Reference Chart

Continued on next page

2-1/4"

Adjust

0° to 135°

Load

direction

2-1/4"

2-3/4"

1-7/16"

PAGE 1
Angles & Straps A3 / AC / JA / MP Framing Angles MP – 18 gauge. Field adjustable from 0° to 135°. Load direction A3 – 18 gauge. Eliminates toenailing and increases strength. AC – 16 gauge. Features staggered nail patterns which reduces wood splitting and allows installation on both sides of the supported member. JA – 14 or 16 gauge. Heavier capacity framing angle for joist support.
PAGE 2
Angles & Straps A3 / AC / JA / MP Framing Angles Fastener Schedule Dimensions (in) USP Stock No. W1 W2 2,4,5 Joist L Qty Type Qty Type A3 A23, GA1, GA2, L30 18 1-7/16 1-7/16 2-3/4 4 10d x 1-1/2 4 10d x 1-1/2 MP3 MP5 MP7 MP9 LS30 LS50 LS70 LS90 18 18 18 18 2-1/4 2-1/4 2-1/4 2-1/4 3-3/8 4-5/8 5-7/8 6-7/8 3 4 5 6 10d 10d 10d 10d 3 4 5 6 10d 10d 10d 10d 3 10d 3 10d 3 16d 3 16d 4 10d 4 10d 4 16d 4 16d AC5 AC7 AC9 Angles & Straps Ref. No.