Technical Specifications
92
Angles & Straps
© 2015 MiTek. All rights reserved.
KHL Heavy Angles
Designed for heavy-duty reinforcement of 90° framing intersections.
Materials: See chart
Finish: USP primer
Options: See chart for Corrosion Finish Options
Codes: See page 11 for Code Reference Chart
Installation:
• Use all specied fasteners. See Product Notes, page 17.
• Connectors are not load rated.
• Bolts must be ordered separately. See page 24 for available sizes.
KHL335
KHL35G
Typical KHL35 installation
KHL55
Gusset
These multi-purpose braces are designed to provide reinforcement
for 90° wood-to-wood connections.
Materials: 12 gauge
Finish: G90 galvanizing
Codes: See page 11 for Code Reference Chart
Installation:
• Use all specied fasteners. See Product Notes, page 17.
• Bolts must be ordered separately. See page 24 for available sizes.
B66
B23
Typical B66
installation
BL4
B / BL Corner Braces
Ref. No. W1 W2 L D1 D2 D3 D4 Qty Dia. Gussets
KHL33 HL33 7 3-1/4 3-1/4 2-1/2 1-1/4 -- -- 2 -- -- 2 5/8 -- --
KHL35 HL35 7 3-1/4 3-1/4 5 1-1/4 2-1/2 2 -- -- 4 5/8 -- --
KHL35G HL35G 7 3-1/4 3-1/4 5 1-1/4 2-1/2 2 -- -- 4 5/8 1
KHL37 HL37 7 3-1/4 3-1/4 7-1/2 1-1/4 2-1/2 2 -- -- 6 5/8 -- --
KHL335 SPECANGLE 3 3-1/2 5-1/4 3-1/2 -- -- -- -- -- -- -- -- 4 1/2 -- --
KHL43 HL43 3 4-1/4 4-1/4 3 1-1/2 -- -- 2-3/4 -- -- 2 3/4 -- --
KHL46 HL46 3 4-1/4 4-1/4 6 1-1/2 3 2-3/4 -- -- 4 3/4 -- --
KHL49 HL49 3 4-1/4 4-1/4 9 1-1/2 3 2-3/4 -- -- 6 3/4 -- --
KHL53 HL53 7 5-3/4 5-3/4 2-1/2 1-1/4 -- -- 2 2-1/2 4 5/8 -- --
KHL55 HL55 7 5-3/4 5-3/4 5 1-1/4 2-1/2 2 2-1/2 8 5/8 -- --
KHL57 HL57 7 5-3/4 5-3/4 7-1/2 1-1/4 2-1/2 2 2-1/2 12 5/8 -- --
KHL73 HL73 3 7-1/4 7-1/4 3 1-1/2 -- -- 2-3/4 3 4 3/4 3
KHL76 HL76 3 7-1/4 7-1/4 6 1-1/2 3 2-3/4 3 8 3/4 3
KHL79 HL79 3 7-1/4 7-1/4 9 1-1/2 3 2-3/4 3 12 3/4 3
1) All bolts shall meet or exceed the specifications of ASTM A 307.
Code
Ref.
120
USP
Stock No.
Steel
Gauge
Dimensions (in)
Bolts
1
Fastener Schedule
Corrosion
Finish
Ref. No. W L Qty Type Qty Type
B23 -- -- 12 2 2-5/8 6 16d -- -- -- --
B24 -- -- 12 2 3-5/8 8 16d -- -- -- --
BL3 A33 12 1-1/4 3-1/16 8 16d -- -- -- --
BL4 A44 12 1-1/4 4-13/16 10 16d -- -- -- --
BL6 -- -- 12 1-1/4 6-9/16 12 16d -- -- -- --
BL8 -- -- 12 1-1/4 8-5/16 14 16d -- -- -- --
B66 A66 12 1-1/2 6 -- -- -- -- 4 3/8
B88 A88 12 2 8 -- -- -- -- 6 3/8
1) Minimum nail embedment shall be 1-5/8" for 16d nails.
2) Bolts shall conform to ASTM A 307 or better.
3)
NAILS:
16d nails are 0.162" dia. x 3-1/2" long.
120
Bolts
2
Fastener Schedule
USP
Stock No.
Steel
Gauge
Nails
1,3
Code
Ref.
Dimensions
(in)
Some model designs
may vary from
illustration shown
Corrosion Finish
Stainless Steel Gold Coat
HDG Triple Zinc
Corrosion Finish Stainless Steel Gold Coat HDG Triple Zinc
Corrosion
Finish
Stainless Steel
Gold Coat
HDG
Triple Zinc
L
W
L
L
L
W
Angles & Straps
L
W1
W2
D2 D1
D3
D4