Technical Specifications

ManualsBrandsMiTek ManualsBearing Plates3/16" x 2" Bearing Plate with 1/2" Bolt Diameter

Concrete & Masonry

Materials: Bolt: ASTM F 1554, Nut: ASTM A 563, Washers: ASTM F 844

Finish: Hot-dip galvanized

Codes: See page 11 for Code Reference Key Chart. See IRC R403.1.6,

IBC 2308.6, 2308.12.8, 2308.12.9 for minimum diameter and

embedment into masonry or concrete.

Installation:

• Select appropriate AB Anchor Bolt.

• Use concrete with minimum compressive strength of 2,500 psi at 28 days.

• Nuts and washers are included.

• Anchor bolts intended for use to satisfy code prescribed anchoring

of mudsill plates, and shall be installed as dened in the code.

• Allowable loads shall be derived in accordance with the code.

• Plate washers may be required in some regions.

BP & LBP – Designed to meet code requirements for mudsill-to-foundation.

HBPS & LBPS – Offers anchor bolt adjustment slots.

Materials: See chart

Finish: BP & HBPS – none; LBP & LBPS – G-185 galvanizing

Options: See Chart for Corrosion Finish Options

Codes: See page 11 for Code Reference Key Chart. See

IRC R602.11.1, IBC 2308.12.8 for minimum plate size requirements.

Installation:

• Bolt holes are sized 1⁄16" larger than Bolt Dia. shown in chart.

AB Anchor Bolts

AB126-HDG -- -- 1/2 6

AB128-HDG -- -- 1/2 8

AB1212-HDG -- -- 1/2 12

AB5812-HDG -- -- 5/8 12

USP

Stock No.

Bolt

Dia.

Code

Ref.

100

Ref.

No.

(in)

Corrosion

Finish

Typical AB128-HDG

installation

Typical Bearing Plate

installation

HBPS/LBPS

Slotted Bearing Plate

AB128-HDG

BP / HBPS / LBP / LBPS Bearing Plates

Ref. No.

LBP12-TZ

LBP1/2,

LBP1/2Z

10 Ga 9/64 2 2 1/2 120

LBP58-TZ

LBP5/8,

LBP5/8Z

10 Ga 9/64 2 2 5/8 100

LBPS12-TZ

LBPS1/2,

LBPS1/2Z

10 Ga 9/64 3 3 1/2

LBPS58-TZ

LBPS5/8,

LBPS5/8Z

10 Ga 9/64 3 3 5/8

HBPS12 BPS1/2-3 3 Ga 1/4 3 3 1/2

HBPS34 BPS3/4-3 3 Ga 1/4 3 3 3/4

HBPS58 BPS5/8-3 3 Ga 1/4 3 3 5/8

BP12 BP1/2 7 Ga 3/16 2 2 1/2

BP582 BP5/8-2 7 Ga 3/16 2 2 5/8

BP583

BP5/8,

BP5/8-3

3 Ga 1/4 3 3 5/8

BP343 BP3/4-3 3 Ga 1/4 3 3 3/4

100

120

Code

Ref.

USP

Stock No.

Bolt

Dia.

Dimensions (in)

Plate

Thickness (T)

Corrosion

Finish

Corrosion Finish

Stainless Steel Gold Coat

HDG Triple Zinc

Corrosion Finish Stainless Steel Gold Coat HDG Triple Zinc

Corrosion

Finish

Stainless Steel

Gold Coat

HDG

Triple Zinc

Corrosion Finish

Stainless Steel Gold Coat

HDG Triple Zinc

Corrosion Finish Stainless Steel Gold Coat HDG Triple Zinc

Corrosion

Finish

Stainless Steel

Gold Coat

HDG

Triple Zinc

BP/LBP

Standard Bearing Plate

Concrete & Masonry