Manualshelf

Technical Specifications

ManualsBrandsMiTek ManualsConstruction Hardware7" x 30" Steel Beam Hanger
1234567
151
© 2015 MiTek. All rights reserved.
EWP Hangers
HLBH Beam Hangers
Heavy-duty hanger for LVL, LSL, and PSL beams.
Materials: 7 gauge
Finish: USP primer
Codes: See page 11 for Code Reference Chart
Installation:
• Use all specied fasteners. See Product Notes, page 17.
• For welded installations, see page 232.
• 16d ring shank nails are supplied with HLBH hangers.
Typical HLBH
installation
HLBH
Fastener Schedule
2
Qty Type Qty Type 100% 100%
4X 15 NA16D-RS 6 10d x 1-1/2 9600 1390 8255 1195
4X 15 NA16D-RS 6 16d 9600 1605 8255 1380
1) Listed loads shall not be increased.
2)
NAILS:
10d x 1-1/2" nails are 0.148" dia. x 1-1/2" long, NA16D-RS nails are 0.148 dia, x 3-1/2" long,
16d nails are 0.162" dia. x 3-1/2" long.
Uplift
160%
Uplift
160%
DF/SP
Allowable Loads (Lbs.)
S-P-F
Allowable Loads (Lbs.)
Header Joist
HLBH
USP
Series
Nailer
Size
Option
Skewed
1,3
Sloped Seat
2,3
Sloped / Skewed
1,2,3
Sloped Top Flange
4
Top Flange Offset
Saddle
5
Ridge
Range
1˚ to 50˚ 1˚ to 45˚ See Sloped Seat and Skewed 0˚ to 45˚ -- -- -- -- 0˚ to 45˚
1) Skewed hangers with skews greater than 15° may have all joist nailing on outside flange.
2) Sloped or sloped / skewed hangers with slopes greater than 15° may have additional joist nails.
3) Skewed hangers typically require a bevel cut however, a square cut option may be available as a custom when requested.
5) Minimum header thickness shall be double the top flange (TF) dimension for 100% table load.
New products or updated product information are designated in
blue font
.
Ordering
Add SK , angle required,
right (R) or left (L) , and
square cut
(SQ)
or
bevel cut
(BV)
to
product number. Ex.
HLBH3595_SK45R_BV
Allowable
Loads
8070 lbs. Max.
50% of uplift load on
skew greater than 15˚.
Add SF, angle required,
and right (R) or left (L),
to product number.
Ex.
HLBH3595_SF30L
7000 lbs. Max.
6650 lbs. Max.
50% of uplift load on
skew greater than 15˚.
Add SL, slope required,
and up (U) or down (D),
to product number.
Ex.
HLBH3595_SL30D
See Sloped Seat and Skewed.
Ex.
HLBH3595_SK45R_BV_SL30D
Add OS, and
right (R) or left (L),
to product number.
Ex.
HLBH3595_OSL
Reduce allowable
table loads using
straight-line
interpolation
45% of table load
100% of table load
per side.
See footnote 5.
100% of table load
Add SA,and saddle
width required
to product number.
Ex.
HLBH3595_SA=5-1/2"
Add DA, and
angle required
to product number.
Ex.
HLBH3595_DA30
Nailer Options
– chart represents maximum allowable loads for hangers used on wood
nailers. Reference page 140.
Specialty Options Chart
– refer to Specialty Options pages 228, 230-231 for additional details
H
L
4-3/8"
D
TF
W
EWP Hangers

Summary of content (7 pages)