Technical Specifications

ManualsBrandsMiTek ManualsConstruction Hardware2" x 4-6" Steel Slant Nail Double Face Mount Hanger

107

Hangers

HUS / JUS / MUS Slant Nail Face Mount Joist Hangers

Hangers

Typical JUS26

installation

Typical HUS46

installation

Typical HUS410IF

inverted ange

installation

MUS

HUS28-2

Double shear nail design

features fewer nails and

faster installation

Uses standard

length nails

JUS28

The HUS, JUS & MUS hanger series offers double shear nailing. USP’s

dimple allows for 30° to 45° nailing through the joist into the header

resulting in higher loads and less nailing. Slant nailing also eliminates

the need for shorter joist nails in 2x applications.

Materials: JUS - 18 gauge; MUS - 18 gauge; HUS - 14 or 16 gauge

Finish: G90 galvanizing

Options: See Chart for Corrosion Finish Options. See HUS Specialty

Options Chart.

Codes: See page 11 for Code Reference Chart

Installation:

• Use all specied fasteners. See Product Notes, page 17.

• Joist nails must be driven at a 30° to 45° angle through the joist

or truss into the header to achieve listed loads. Standard length

“double shear” nails must be used to achieve listed load values.

• JUS & MUS - 16d sinkers (0.148" x 3-1⁄4") may be used where 10d

commons are specied with no load reduction.

Option Inverted Flange

Not available in

widths less than 2-1/4".

100% of table load.

65% of table load when

nailing into the support

members end grain.

Add IF

to product number.

Ex. HUS410_IF

Ordering

Allowable

Loads

Range

HUS Specialty Options Chart

Refer to Specialty Options pages 228-229 for additional details.

Dimple allows

30° to 45°

nailing

Summary of content (9 pages)

PAGE 1
Hangers HUS / JUS / MUS Slant Nail Face Mount Joist Hangers The HUS, JUS & MUS hanger series offers double shear nailing. USP’s dimple allows for 30° to 45° nailing through the joist into the header resulting in higher loads and less nailing. Slant nailing also eliminates the need for shorter joist nails in 2x applications. Materials: JUS - 18 gauge; MUS - 18 gauge; HUS - 14 or 16 gauge Finish: G90 galvanizing Options: See Chart for Corrosion Finish Options. See HUS Specialty Options Chart.
PAGE 2
Hangers Fastener Schedule2,3,5 Header Joist Dimensions (in) Joist Size USP Stock No.
PAGE 3
Hangers Fastener Schedule2,3,5 Header Joist Dimensions (in) Joist Size USP Stock No.
PAGE 4
Hangers Fastener Schedule2,3,5,6 Header Joist Dimensions (in) Joist Size USP Stock No. JUS26-2 JUS28-2 Ref. No.
PAGE 5
Hangers Fastener Schedule2,3,4,5 Header Joist Dimensions (in) Joist Size 4x4 4x6 4x8 Steel Gauge W 18 3-5/8 Ref. No.
PAGE 6
Hangers Fastener Schedule2,3,4,5 Header Joist Dimensions (in) Joist Size 4 x 14 4 x 16 4 x 18 6x6 6 x 10 Ref. No.
PAGE 7
EWP Hangers HD / HDQIF Face Mount Hangers HD – Designed to support LVL, LSL, and PSL beams and headers in medium load conditions. HDQIF – inverted flange face mount hangers fasten to LVL, LSL and PSL beams and headers with WS Wood Screws. Ma terials: See EWP Face Mount Hangers charts, pages 146-148. Finish: G90 galvanizing Options: See Specialty Options chart. Codes: See page 11 for Code Reference Chart Typical HDQIF installation Typical HD installation Installation: • Use all specified fasteners.
PAGE 8
EWP Hangers SCL Charts Face Mount Hangers Fastener Schedule2,3,4 Joist Header Dimensions (in) Joist Size 1-3/4 x 7-1/4 1-3/4 x 9-1/2 1-3/4 x 11-1/4 - 11-7/8 1-3/4 x 14 USP Stock No. H D Qty Type Qty Type Uplift1 100% 115% 125% 160% 100% 115% 125% 160% x 14 1-13/16 7-1/8 2 14 16d 4 10d x 1-1/2 1975 2270 2335 760 1695 1950 1960 660 HD17925 HU9, MIU1.
PAGE 9
Plated Truss MUS / HUS Slant Nail Truss Hangers 2" The MUS & HUS hanger series offers double shear nailing. USP’s raised dimple allows for 30° to 45° nailing through the joist into header, resulting in higher loads and less nailing. Materials: See chart Finish: G90 galvanizing Options: See chart for Corrosion Finish Options Codes: See page 11 for Code Reference Chart H Raised dimple allows 30° to 40° nailing Typical HUS installation (MUS similar) Installation: • Use all specified fasteners.