Technical Specifications

133
Hangers
© 2015 MiTek. All rights reserved.
HWUH Heavy-Duty Welded Universal Hangers
Floor
Uplift
1
Ref. No. W H Qty Type Qty Type 100% 115% 125% 160%
6 10d 4 10d x 1-1/2 2265 2265 2265 930
2 1/2 x 6 Emb. J-Bolt 4 10d x 1-1/2 2265 2265 2265 930
6 10d 4 10d x 1-1/2 2265 2265 2265 930
2 1/2 x 6 Emb. J-Bolt 4 10d x 1-1/2 2265 2265 2265 930
6 10d 4 10d x 1-1/2 2265 2265 2265 930
2 1/2 x 6 Emb. J-Bolt 4 10d x 1-1/2 2265 2265 2265 930
6 10d 4 10d x 1-1/2 2265 2265 2265 930
2 1/2 x 6 Emb. J-Bolt 4 10d x 1-1/2 2265 2265 2265 930
6 10d 4 10d x 1-1/2 2265 2265 2265 930
2 1/2 x 6 Emb. J-Bolt 4 10d x 1-1/2 2265 2265 2265 930
6 10d 4 10d x 1-1/2 2265 2265 2265 930
2 1/2 x 6 Emb. J-Bolt 4 10d x 1-1/2 2265 2265 2265 930
6 10d 4 10d 3800 3800 3800 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 3800 3800 3800 1035
6 10d 4 10d 3800 3800 3800 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 3800 3800 3800 1035
6 10d 4 10d 3800 3800 3800 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 3800 3800 3800 1035
6 10d 4 10d 3800 3800 3800 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 3800 3800 3800 1035
6 10d 4 10d 3800 3800 3800 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 3800 3800 3800 1035
6 10d 4 10d 3800 3800 3800 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 3800 3800 3800 1035
6 10d 4 10d 3800 3800 3800 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 3800 3800 3800 1035
6 10d 4 10d 3800 3800 3800 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 3800 3800 3800 1035
6 10d 4 10d 3800 3800 3800 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 3800 3800 3800 1035
6 10d 4 10d 3800 3800 3800 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 3800 3800 3800 1035
6 10d 4 10d 3800 3800 3800 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 3800 3800 3800 1035
6 10d 4 10d 3800 3800 3800 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 3800 3800 3800 1035
1) Uplift loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.
2) Minimum nail embedment shall be 1-1/2˝ for 10d nails.
3)
NAILS:
10d nails are 0.148˝ dia. x 3˝ long, NA21 nails are 0.192˝ dia. x 1-3/4˝ long and are included with 4x, 6x, and 8x HWUH hangers.
New products or updated product information are designated in
blue font
.
Floor
Uplift
1
Ref. No. W H Qty Type Qty Type 100% 115% 125% 160%
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
6 NA21 4 10d 5165 5165 5165 1035
2 1/2 x 6 Emb. J-Bolt 4 10d 5165 5165 5165 1035
1) Uplift loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.
2) Minimum nail embedment shall be 1-1/2˝ for 10d nails.
3)
NAILS:
10d nails are 0.148˝ dia. x 3˝ long, NA21 nails are 0.192˝ dia. x 1-3/4˝ long and are included with 4x, 6x, and 8x HWUH hangers.
New products or updated product information are designated in
blue font
.
Fastener Schedule
2,3
DF/SP Allowable Loads (Lbs.)
Beam/
Joist Size
USP
Stock No.
Header Joist Roof
Code
Ref.
Dimensions (in)
Code
Ref.
130
130
HWUH46 -- -- 3-9/16 5-3/8
4 x 8
-- --
2 x 12 HWUH212 -- --
2 x 10
-- --
3 x 6 HWUH36 -- --
3 x 8 HWUH38 -- --
DF/SP Allowable Loads (Lbs.)
Roof
HWUH48
4 x 6
Fastener Schedule
2,3
Header Joist
2-5/8
2-5/8
2-5/8 3 x 14 HWUH314 -- --
3 x 16 HWUH316 -- --
3 x 10 HWUH310 -- --
3 x 12
Dimensions (in)
HWUH312 -- --
2 x 4 - 6 -- -- 1-5/8 HWUH26
HWUH210
2 x 14 HWUH214 -- --
2 x 16 HWUH216 -- --
2 x 8 HWUH28 -- --
(2) 2 x 10 HWUH210-2 -- --
(2) 2 x 12 HWUH212-2 -- --
(2) 2 x 6 HWUH26-2 -- --
(2) 2 x 8 HWUH28-2 -- --
-- --
4 x 12 HWUH412 -- --
4 x 14 HWUH414 -- --
(2) 2 x 14 HWUH214-2 -- --
(2) 2 x 16 HWUH216-2 -- --
4 x 10 HWUH410
Beam/
Joist Size
USP
Stock No.
6 x 8 HWUH68 -- --
6 x 10 HWUH610 -- --
4 x 16 HWUH416 -- --
6 x 6 HWUH66 -- --
-- --
8 x 6 HWUH86 -- --
6 x 12 HWUH612 -- --
6 x 14 HWUH614 -- --
8 x 16 HWUH816 -- --
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
2-5/8
2-5/8
8 x 12 HWUH812 -- --
8 x 14 HWUH814 -- --
8 x 8 HWUH88 -- --
8 x 10 HWUH810 -- --
6 x 16 HWUH616
5-3/8
7-1/8
9-1/8
5-3/8
11
13
5-3/8
7-1/8
9-1/8
16
11
13
16
7-1/8
9-1/8
11
13
16
3-1/8
3-1/8
2-5/8
3-1/8
3-1/8
3-1/8
3-1/8
7-1/8
9-1/8
11
13
16
7-1/2
7-1/2
7-1/2
7-1/2
7-1/2
5-3/8
5-1/2
5-1/2
5-1/2
7-1/2
16
3-9/16
3-9/16
3-9/16
3-9/16
3-9/16
5-1/2
5-1/2
5-1/2
7-1/8
9-1/8
11
13
11
13
16
5-3/8
7-1/8
9-1/8
Specialty Options Chart
Refer to Specialty Options pages 228, 230-231 for additional details.
Option
Skewed
1,3
Sloped Seat
2
Sloped / Skewed
1,2,3
Saddle
Range
1˚ to 45˚ 1˚ to 45˚ See Sloped Seat and Skewed -- --
1) Skewed hangers with skews greater than 15° may have all joist nailing on outside flange.
2) Sloped or sloped / skewed hangers with slopes greater than 15° may have additional joist nails.
3) For skewed hangers, the required cut type (square or bevel) of joist member may vary based on skew angle
and width of hanger. Some square cut hangers will require custom pricing due to welded back plate.
New products or updated product information are designated in
blue font
.
Top Flange Offset
-- --
Allowable
Loads
Ordering
100% of table load
Add
SK,
angle required,
right (R) or left (L), and
square cut (
SQ ) or bevel cut ( BV )
to product number.
Ex. HWUH410_SK45R_SQ
100% of table load 100% of table load
Hanger
Width
3-1/2" or less
3-9/16" to 5-1/2"
5-9/16"˝ to 7-1/2"
Add SA, and saddle
width required
to product number.
Ex. HWUH410_SA=5-1/2"
% of table
load:
60%
75%
85%
Add SL, slope required,
and up (U) or down (D),
to product number.
Ex. HWUH410_SL30D
See Sloped Seat and Skewed.
Ex. HWUH410_SK45R_SQ_SL30D
Add OS, and
right (R) or left (L),
to product number.
Ex. HWUH410_OSL
100% of table load
per side
Hangers