Technical Specifications

79
Caps & Bases
© 2015 MiTek. All rights reserved.
KCCQ / KECCQ Column Caps
Specialty Options:
• KECCQ – Straps may be rotated 90° on special order
where the W2 dimension is less than or equal to the
W1 dimension.
• KCCQO/KECCQO – Cap only, no strap design for eld
welding to pipe or other columns.
• KCCQOB – For cross beam connections. Any two buckets
can be welded together for a wide variety of applications.
Allowable load shall be the lesser of the two components.
• KCCQT – For T beam intersections, consult USP. Specify
beam/column conditions, dimensions, and loading
requirements.
• KCCQC – For X beam intersections, consult USP. Specify
beam/column conditions, dimensions, and loading
requirements.
• KECCQLL/R – For L beam intersections, consult USP.
Specify left (L) or right (R) beam/column conditions,
dimensions, and loading requirements.
Dimension call-outs not shown in the table must be
specied at time of ordering for specialty options,
non-catalog, or rough/full size lumber sizes.
Refer to Options for Multiple-Beam Column Caps
Special Order Worksheet for ordering instructions at
www.uspconnectors.com/resources/technical-bulletins.
KCCQT
KCCQO
KECCQ
left
KECCQLL
rotated 90° left
KCCQ
offset right
KCCQC
Optional KECCQ
rotated straps 90°
KECCQ
right
KECCQLR
rotated 90° right
KECCQ
rotated 45° left
KCCQ
offset left
KCCQOB
KECCQLL
left shown
KECCQ
offset left
KECCQ
offset right
KECCQ
rotated 45° right
Top View of Specialty Options Column Cap Congurations
L
H
W1
L1
L2
H1
H2
W2
W1
L
H2
W3
W2
W1
W1
W2
W4
W3
H2
H1
H3
4" Typ.
H1
L
W1
W3
W2
H2
Caps & Bases
H1
L
H
W1