Manualshelf

Technical Specifications

ManualsBrandsMiTek ManualsConstruction Hardware2-5/16" x 16" Steel Masonry Hanger
12
135
Hangers
© 2015 MiTek. All rights reserved.
MPH Masonry Hangers
)
y
p
g
p
)
g,
g,
p
g,
g
p
p
p
p
g
Floor
Ref. No. W H L Qty Type Qty Type 100% 115% 125%
2-5/16 x 9-1/2 MPH2395 -- -- 12 2-3/8 9-1/2 7 2 16d duplex 2 10d x 1-1/2 3855 3890 3915
2-5/16 x 11-7/8 MPH23118 WM3511.88 12 2-3/8 11-7/8 7 2 16d duplex 2 10d x 1-1/2 3855 3890 3915
2-5/16 x 14 MPH2314 WM3514 12 2-3/8 14 7 2 16d duplex 2 10d x 1-1/2 3855 3890 3915
2-5/16 x 16 MPH2316 WM3516 12 2-3/8 16 7 2 16d duplex 2 10d x 1-1/2 3855 3890 3915
2-5/16 x 18 MPH2318 WM3518 12 2-3/8 18 7 2 16d duplex 2 10d x 1-1/2 3855 3890 3915
2-5/16 x 20 MPH2320 WM3520 12 2-3/8 20 7 2 16d duplex 2 10d x 1-1/2 3855 3890 3915
2-1/2 x 9-1/4 MPH25925 -- -- 12 2-1/2 9-1/4 7 2 16d duplex 2 10d x 1-1/2 4145 4180 4205
2-1/2 x 9-1/2 MPH2595 -- -- 12 2-1/2 9-1/2 7 2 16d duplex 2 10d x 1-1/2 4145 4180 4205
2-1/2 x 11-1/4 MPH25112 -- -- 12 2-1/2 11-1/4 7 2 16d duplex 2 10d x 1-1/2 4145 4180 4205
2-1/2 x 11-7/8 MPH25118 -- -- 12 2-1/2 11-7/8 7 2 16d duplex 2 10d x 1-1/2 4145 4180 4205
2-1/2 x 14 MPH2514 WMI314 12 2-1/2 14 7 2 16d duplex 2 10d x 1-1/2 4145 4180 4205
2-1/2 x 16 MPH2516 WMI316 12 2-1/2 16 7 2 16d duplex 2 10d x 1-1/2 4145 4180 4205
2-1/2 x 18 MPH2518 WMI318 12 2-1/2 18 7 2 16d duplex 2 10d x 1-1/2 4145 4180 4205
2-1/2 x 20 MPH2520 WMI320 12 2-1/2 20 7 2 16d duplex 2 10d x 1-1/2 4145 4180 4205
2-1/2 x 22 MPH2522 -- -- 12 2-1/2 22 7 2 16d duplex 2 10d x 1-1/2 4145 4180 4205
2-1/2 x 24 MPH2524 -- -- 12 2-1/2 24 7 2 16d duplex 2 10d x 1-1/2 4145 4180 4205
2-1/2 x 26 MPH2526 -- -- 12 2-1/2 26 7 2 16d duplex 2 10d x 1-1/2 4145 4180 4205
3 x 9-1/4 MPH210-2 WM29.25-2 12 3-1/8 9-1/4 7 2 16d duplex 2 10d 4280 4280 4280
3 x 9-1/2 MPH1595-2 WM29.5-2 12 3-1/8 9-1/2 7 2 16d duplex 2 10d 4280 4280 4280
3 x 11-1/4 MPH15112-2 WM211.25-2 12 3-1/8 11-1/4 7 2 16d duplex 2 10d 4280 4280 4280
3 x 11-7/8 MPH15118-2 WM211.88-2 12 3-1/8 11-7/8 7 2 16d duplex 2 10d 4280 4280 4280
3-1/2 x 12 MPH3512 WMI412 12 3-1/2 12 7 2 16d duplex 2 10d 4280 4280 4280
3-1/2 x 14 MPH3514 WMI414 12 3-1/2 14 7 2 16d duplex 2 10d 4280 4280 4280
3-1/2 x 16 MPH3516 WMI416 12 3-1/2 16 7 2 16d duplex 2 10d 4280 4280 4280
3-1/2 x 18 MPH3518 WMI418 12 3-1/2 18 7 2 16d duplex 2 10d 4280 4280 4280
3-1/2 x 20 MPH3520 WMI420 12 3-1/2 20 7 2 16d duplex 2 10d 4280 4280 4280
3-1/2 x 9-1/4 MPH410 WM410 12 3-9/16 9-1/4 7 2 16d duplex 2 10d 4280 4280 4280
3-1/2 x 11-1/4 MPH412 WM412 12 3-9/16 11-1/4 7 2 16d duplex 2 10d 4280 4280 4280
3-1/2 x 9-1/2 MPH1795-2 WM3.56/9.5 12 3-5/8 9-1/2 7 2 16d duplex 2 10d 4280 4280 4280
3-1/2 x 11-7/8 MPH17118-2 WM3.56/11.88 12 3-5/8 11-7/8 7 2 16d duplex 2 10d 4280 4280 4280
4-5/8 x 11-7/8 MPH23118-2 WM3511.88-2 12 4-5/8 11-7/8 7 2 16d duplex 2 10d 4280 4280 4280
4-5/8 x 14 MPH2314-2 WM3514-2 12 4-5/8 14 7 2 16d duplex 2 10d 4280 4280 4280
4-5/8 x 16 MPH2316-2 WM3516-2 12 4-5/8 16 7 2 16d duplex 2 10d 4280 4280 4280
4-5/8 x 18 MPH2318-2 WM3518-2 12 4-5/8 18 7 2 16d duplex 2 10d 4280 4280 4280
4-5/8 x 20 MPH2320-2 WM3520-2 12 4-5/8 20 7 2 16d duplex 2 10d 4280 4280 4280
5-1/4 x 9-1/2 MPH5595 WM5.50/9.5 12 5-5/8 9-1/2 7 2 16d duplex 2 10d 4280 4280 4280
5-1/4 x 11-7/8 MPH55118 WM5.50/11.88 12 5-5/8 11-7/8 7 2 16d duplex 2 10d 4280 4280 4280
7 x 9-1/2 MPH3595-2 WMI49.5-2 12 7-1/8 9-1/2 8 2 16d duplex 2 10d 4280 4280 4280
7 x 11-1/4 MPH35112-2 WMI411.25-2 12 7-1/8 11-1/4 8 2 16d duplex 2 10d 4280 4280 4280
7 x 11-7/8 MPH35118-2 WMI411.88-2 12 7-1/8 11-7/8 8 2 16d duplex 2 10d 4280 4280 4280
7 x 14 MPH3514-2 WMI414-2 12 7-1/8 14 8 2 16d duplex 2 10d 4280 4280 4280
7 x 16 MPH3516-2 WMI416-2 12 7-1/8 16 8 2 16d duplex 2 10d 4280 4280 4280
7 x 18 MPH3518-2 WMI418-2 12 7-1/8 18 8 2 16d duplex 2 10d 4280 4280 4280
3-1/8 x glulam MPH325 -- -- 12 3-1/4 specify 7 2 16d duplex 2 10d 4280 4280 4280
5-1/8 x glulam MPH525 -- -- 12 5-1/4 specify 7 2 16d duplex 2 10d 4280 4280 4280
1
)
Masonr
y
com
p
ressive stren
g
th shall be minimum 1500
p
si.
2
)
NAILS: 10d x 1-1/2 nails are 0.148" dia. x 1-1/2" lon
g,
10d nails are 0.148" dia. x 3" lon
g,
16d du
p
lex nails are 0.162" dia. x 3-1/2" lon
g,
double headed nails and shall be installed in
g
routed cells in accordance to manufacturer's installation s
p
ecifications.
New
p
roducts or u
p
dated
p
roduct information are desi
g
nated in blue font.
Engineered Lumber Sizes
8, F4,
R10
Engineered Lumber Sizes
Dimensions (in)
Fastener Schedule
2
DF/SP
Allowable Loads (Lbs.)
1
Face
8,
F4,
R10
Code
Ref.
Joist
Beam/
Joist Size
USP
Stock No.
Steel
Gauge
Roof
Specialty Options Chart – Refer to Specialty Options pages 228, 230-231 for additional details.
Option
Skewed
1,3
Sloped Seat
2
Sloped / Skewed
1,2,3
Top Flange Offset
Range
1˚ to 60˚ 1˚ to 45˚ See Sloped Seat and Skewed
1) Skewed hangers with skews greater than 15° may have all joist nailing on outside flange.
2) Sloped or sloped / skewed hangers with slopes greater than 15° may have additional joist nails.
3) For skewed hangers, the required cut type (square or bevel) of joist member may vary based on skew angle
and width of hanger. Some square cut hangers will require custom pricing due to welded back plate.
-- --
See Sloped Seat and Skewed.
Ex. MPH210_SK45R_SQ_SL30D
Add OS, and
right (R) or left (L),
to product number.
Ex. MPH210_OSL
Allowable
Loads
Ordering
100% of table load
Add SK, angle required,
right (R ) or left (L ), and
square cut (
SQ
) or bevel cut (
BV
)
to product number.
Ex. MPH210_SK45R_SQ
Add SL, slope required,
and up (U) or down (D),
to product number.
Ex. MPH210_SL30D
100% of table load 100% of table load
Hanger Width
3-1/2" or less
3-9/16" to 5-1/2"
5-9/16" to 7-1/2"
% of table load:
60%
75%
85%
1) Skewed hangers with skews greater
than 15° may have all joist nailing on
outside ange.
2) Sloped or sloped / skewed hangers
with slopes greater than 15° may
have additional joist nails.
3) For skewed hangers, the required
cut type (square or bevel) of joist
member may vary based on skew
angle and width of hanger. Some
square cut hangers will require
custom pricing due to welded
back plate.
Hangers