Technical Specifications
97
Angles & Straps
© 2015 MiTek. All rights reserved.
Corrosion Finish
Stainless Steel Gold Coat
HDG Triple Zinc
Corrosion Finish Stainless Steel Gold Coat HDG Triple Zinc
Corrosion
Finish
Stainless Steel
Gold Coat
HDG
Triple Zinc
HRS / HTP / KST / KSTI / LSTA / LSTI / MSTA / MSTC / ST
Strap Ties
Nails
Bolts
6
Nails
Bolts
6
Ref. No. W L Type Dia. 160% 160% 160% 160%
HRS6 HRS6 12 1-3/8 6 6 6 10d -- -- -- -- 640 -- -- 550 -- --
HRS8 HRS8 12 1-3/8 8 10 10 10d -- -- -- -- 1065 -- -- 920 -- --
HRS12 HRS12 12 1-3/8 12 14 14 10d -- -- -- -- 1490 -- -- 1290 -- --
KST227 MST27 12 2-1/16 27 34 34 16d 4 1/2 4540 2285 3645 2020
KST237 MST37 12 2-1/16 37-1/2 48 48 16d 6 1/2 5140 3240 5140 2875
KST248 MST48 12 2-1/16 48 62 54 16d 8 1/2 5140 3845 5140 3555
KSTI226 MSTI26 12 2-1/16 26 26 26 10d x 1-1/2 -- -- -- -- 2810 -- -- 2245 -- --
KSTI236 MSTI36 12 2-1/16 36 36 36 10d x 1-1/2 -- -- -- -- 3890 -- -- 3110 -- --
KSTI248 MSTI48 12 2-1/16 48 48 48 10d x 1-1/2 -- -- -- -- 5140 -- -- 4145 -- --
KSTI260 MSTI60 12 2-1/16 60 60 60 10d x 1-1/2 -- -- -- -- 5140 -- -- 5140 -- --
KSTI272 MSTI72 12 2-1/16 72 72 60 10d x 1-1/2 -- -- -- -- 5140 -- -- 5140 -- --
HRS416-TZ HRS416Z 12 3-1/4 16 16 16 WS15-GC -- -- -- -- 2945 -- -- 2410 -- -- 110
KST260 MST60 10 2-1/16 60 72 64 16d 10 1/2 6720 4910 6720 4390
KST272 MST72 10 2-1/16 72 72 64 16d 10 1/2 6720 4910 6720 4390
1
)
Allowable loads have been increased 60% for wind or seismic loads; no further increase shall be
p
ermitted.
2
)
Allowable loads are based on the use of either nails or bolts; nail and bolt values cannot be combined.
3
)
Minimum nail embedment shall be 1-1/2" for 10d nails and 1-5/8" for 16d nails.
4
)
Total number of nail and/or bolt holes
p
rovided in the stra
p
.
5
)
Minimum
q
uantit
y
of fasteners to be installed with e
q
ual fasteners at each end of the connection. Product ma
y
have
additional nail holes not needed to meet
p
ublished allowable load of
p
roduct.
6
)
Allowable bolt loads are based on
p
arallel-to-
g
rain loadin
g
, minimum of 2-1/2" thick.
7
)
WS15-GC Wood Screws are 1/4" dia. x 1-1/2" lon
g
.
8
)
NAILS: 10d x 1-1/2 nails are 0.148" dia. x 1-1/2" lon
g,
10d nails are 0.148" dia. x 3" lon
g,
16d nails are 0.162" dia. x 3-1/2" lon
g
.
New
p
roducts or u
p
dated
p
roduct information are desi
g
nated in blue font.
14,
R9, F7
110
USP
Stock No.
Steel
Gauge
Total
Qty
4
Code
Ref.
Corrosion
Finish
Dimensions (in)
Fastener Schedule
3,7,8
Bolts
DF/SP
Allowable Tension
Loads (Lbs.)
1,2
S-P-F/HF
Allowable Tension
Loads (Lbs.)
1,2
Nails
Min
Qty
5
Min
Qty
5
14,
R9,
F7
Total
3
DF/SP
Total
4
DF/SP
Total
4
DF/SP
Ref. No. Qty
Tension 160%
1
Qty
Tension 160%
1
Qty
Tension 160%
1
18 -- -- -- -- 12 1150 12 1365
16 -- -- -- -- 16 1535 14 1590
18 -- -- -- -- 28 2690 24 2725
16 -- -- -- -- 32 3070 30 3410
18 -- -- -- -- 44 4225 38 4315
16 -- -- -- -- 48 4610 42 4715
18 -- -- -- -- 62 6015 54 6015
16 -- -- -- -- 64 6015 54 6015
18 -- -- -- -- 64 6015 54 6015
16 -- -- -- -- 66 6015 56 6015
18 -- -- -- -- -- -- -- -- 20 2480
16 -- -- -- -- -- -- -- -- 22 2730
18 -- -- -- -- -- -- -- -- 32 3970
16 -- -- -- -- -- -- -- -- 34 4215
18 -- -- -- -- -- -- -- -- 46 6255
16 -- -- -- -- -- -- -- -- 48 6530
18 -- -- -- -- -- -- -- -- 46 6255
16 -- -- -- -- -- -- -- -- 48 6530
18
14
1410 -- -- -- -- -- -- -- --
16
16
1615 -- -- -- -- -- -- -- --
18
26
2620 -- -- -- -- -- -- -- --
16
28
2820 -- -- -- -- -- -- -- --
18
38
3830 -- -- -- -- -- -- -- --
16
40
4030 -- -- -- -- -- -- -- --
18 50 5040 -- -- -- -- -- -- -- --
16 52 5240 -- -- -- -- -- -- -- --
1) Allowable loads have been increased 60% for wind or seismic loads;
no further increase shall be permitted.
2) Minimum nail embedment shall be 1-1/2" for 10d nails and 1-5/8" for 16d nails.
3) Total number of of nail holes provided in the strap.
4)
NAILS:
10d x 1-1/2 nails are 0.148" dia. x 1-1/2" long, 10d nails are 0.148" dia. x 3" long,
16d nails are 0.162" dia. x 3-1/2" long.
KSTI272 MSTI72
10d Fasteners
2
USP
Stock No.
Clear
Span
MSTC28 MSTC28
KSTI260 MSTI60
MSTC40
KSTI236 MSTI36
KSTI248 MSTI48
KST260
KST272
MST60
MSTC66
MST72
16d Fasteners
2
10d x 1-1/2" Fasteners
4
KST237
KST248
MST37
MST48
MSTC78 MSTC78
MSTC52
MSTC40
MSTC52
MSTC66
Typical KST237
oor-to-oor
installation
Clear Span Chart
1) Allowable loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.
2) Minimum nail embedment shall be 1-1/2" for 10d nails and 1-5/8" for 16d nails.
3) Total number of of nail holes provided in the strap.
4) NAILS: 10d x 1-1/2 nails are 0.148" dia. x 1-1/2" long, 10d nails are 0.148" dia. x 3" long, 16d nails are 0.162" dia. x 3-1/2" long.
Angles & Straps
1" min.
Optional nails (wood
shrinkage may occur
and cause strap to
buckle outward)
End length
End length
Clear span