Technical Specifications

ManualsBrandsMiTek ManualsConstruction Hardware3-1/2" x 18" Steel Top Flange Hanger

157

EWP Hangers

Top Mount Hanger Charts

Fastener Schedule

4,6

Uplift

DF/SP

Joist Size Ref. No. Ga W H D L TF Qty Type Qty Type LVL PSL LSL SPF DF/SP

160%

BPH3528 LBV3.56/28 x 12 3-9/16 28 2-3/4 -- 2-1/32 10 16d 6 10d 3430 3510 3775 3280 -- 3430 1140

2, R12,

HBPH3528

HB3.56/28 x 10 3-9/16 28 3-1/2 -- 3 22 16d 10 16d 7000 7000 7000 7000 -- 7000 2705 2

PHM3528

HWI428,

WPI428

x 7/10 3-5/8 28 2-1/2 7 3 2 16d 2 10d 3745 3570 3080 3255 -- 3255 --

PHXU3528 WPU3.56/28 x 7 3-9/16 28 3-1/4 10 2-1/2 8 16d 6 10d 6650 5785 6420 3590 -- 5285 1290

BPH3530 LBV3.56/30 x 12 3-9/16 30 2-3/4 -- 2-1/32 10 16d 6 10d 3430 3510 3775 3280 -- 3430 1140

HBPH3530

HB3.56/30 x 10 3-9/16 30 3-1/2 -- 3 22 16d 10 16d 7000 7000 7000 7000 -- 7000 2705 2

PHM3530

HWI430,

WPI430

x 7/10 3-5/8 30 2-1/2 7 3 2 16d 2 10d 3745 3570 3080 3255 -- 3255 --

PHXU3530 -- -- x 7 3-9/16 30 3-1/4 10 2-1/2 8 16d 6 10d 6650 5785 6420 3590 -- 5285 1290

BPH3532 -- -- x 12 3-9/16 32 2-3/4 -- 2-1/32 10 16d 6 10d 3430 3510 3775 3280 -- 3430 1140

PHM3532

HWI432,

WPI432

x 7/10 3-5/8 32 2-1/2 7 3 2 16d 2 10d 3745 3570 3080 3255 -- 3255 --

PHXU3532 -- -- x 7 3-9/16 32 3-1/4 10 2-1/2 8 16d 6 10d 6650 5785 6420 3590 -- 5285 1290 130

THO20950-2

LBV4.12/9.5,

LBV4.28/9.5,

MIT4.28/9.5

x 16 4-3/16 9-1/2 3 -- 2 10 16d 6 10d 2330 2665 2665 2240 2630 2665 1115

PHM4295 -- -- x 7/10 4-3/16 9-1/2 2-1/2 7 3 2 16d 2 10d 3745 3570 3080 3255 -- 3255 --

THO20118-2

LBV4.12/11.88,

LBV4.28/11.88,

MIT4.28/11.88

x 16 4-3/16 11-7/8 3 -- 2 10 16d 6 10d 2330 2700 2700 2270 2630 2700 1115

PHM42118 -- -- x 7/10 4-3/16 11-7/8 2-1/2 7 3 2 16d 2 10d 3745 3570 3080 3255 -- 3255 --

THO20140-2

LBV4.12/14,

LBV4.28/14,

MIT4.28/14

x 12 4-3/16 14 3 -- 1-15/16 10 16d 6 10d 2330 3700 3700 2765 2630 3700 1175

PHM4214 -- -- x 7/10 4-3/16 14 2-1/2 7 3 2 16d 2 10d 3745 3570 3080 3255 -- 3255 --

THO20160-2

LBV4.12/16,

LBV4.28/16

x 12 4-3/16 16 3 -- 1-15/16 10 16d 6 10d 2330 3700 3700 2765 2630 3700 1175

PHM4216 -- -- x 7/10 4-3/16 16 2-1/2 7 3 2 16d 2 10d 3745 3570 3080 3255 -- 3255 --

THO23950-2

LBV4.75/9.5,

MIT359.5-2

x 12 4-3/4 9-1/2 3 -- 2 10 16d 6 10d 3535 3635 3635 2675 2630 3665 1175

PHM2395-2 WP359.5-2 x 7/10 4-3/4 9-1/2 2-1/2 7 3 2 16d 2 10d 3745 3255 2965 3255 -- 3255 --

THO23118-2

LBV4.75/11.88,

MIT3511.88-2

x 12 4-3/4 11-7/8 3 -- 2-1/8 10 16d 6 10d 3535 3665 3665 3005 2630 3665 1175

PHM23118-2 WP3511.88-2 x 7/10 4-3/4 11-7/8 2-1/2 7 3 2 16d 2 10d 3745 3255 2965 3255 -- 3255 --

4-1/2 - 4-5/8 x 14 THO23140-2

LBV4.75/14,

MIT3514-2,

WP3514-2

x 12 4-3/4 14 3 -- 2-1/8 12 16d 6 10d 3535 4405 4405 3265 2630 4450 1175

THO23160-2 LBV4.75/16 x 12 4-3/4 16 3 -- 2-1/8 12 16d 6 10d 3535 4405 4405 3265 2630 4450 1175

PHM2316-2 WP3516-2 x 7/10 4-3/4 16 2-1/2 7 3 2 16d 2 10d 3745 3255 2965 3255 -- 3255 --

THO23180-2 LBV4.75/18 x 12 4-3/4 18 3 -- 2-1/8 14 16d 6 10d 3535 4685 4685 3520 2630 4770 1175

PHM2318-2 WP3518-2 x 7/10 4-3/4 18 2-1/2 7 3 2 16d 2 10d 3745 3255 2965 3255 -- 3255 --

THO23200-2 LBV4.75/20 x 12 4-3/4 20 3 -- 2-1/8 14 16d 6 10d 3535 4685 4685 3520 2630 4770 1175

PHM2320-2 WP3520-2 x 7/10 4-3/4 20 2-1/2 7 3 2 16d 2 10d 3745 3255 2965 3255 -- 3255 --

1) When I-joist is used as a header, all nails must be 10d x 1-1/2.

2) Uplift loads have been increased 60% for wind or seismic loads; no further increase shall be permitted

3) Some listed loads may be increased for short-term loading. Refer to code evaluation reports for USP Structural Connectors for details.

4) Minimum nail penetration shall be 1-1/2" for 10d nails and 1-5/8" for 16d nails.

5) When I-Joists with flanges less than 1-1/2" thick are used as headers, the published capacity shall be reduced. Contact USP for additional information.

NAILS:

10d x 1-1/2" nails are 0.148" dia. x 1-1/2" long, 10d nails are 0.148" dia. x 3" long, 16d nails are 0.162" dia. x 3-1/2" long.

Load tables address hanger/header/fastener limitations only. Joist limitations must be determined for each installation.

New products or updated product information are designated in

blue font

R12,

4 - 4-3/16 x

11-7/8

4 - 4-3/16 x

9-1/2

R12,

Code

Ref.

R12,

4-1/2 - 4-5/8 x 20

4-1/2 - 4-5/8 x 16

4-1/2 - 4-5/8 x 18

4 - 4-3/16 x 14

4 - 4-3/16 x 16

4-1/2 - 4-5/8 x

9-1/2

4-1/2 - 4-5/8 x

11-7/8

Allowable Loads Header Type (Lbs.)

1,3

3-1/2 x 32

Header Joist Download 100%

I-Joist

3-1/2 x 28

3-1/2 x 30

Dimensions (in)

USP

Stock No.

Web

Stiff

Reqd

EWP Hangers