Technical Specifications
208
Plated Truss
© 2015 MiTek. All rights reserved.
SBP Supplementary Bearing Plates
100% 115% 125% 100% EBL 115% EBL 125% EBL
DF 625 2260 2600 2825 5540 5.91 5880 6.27 6105 6.51
SP 565 2440 2805 3050 5405 6.38 5770 6.81 6015 7.10
S-P-F 425 1940 2230 2425 4170 6.54 4460 7.00 4655 7.30
Hem Fir 405 1980 2275 2475 4105 6.76 4400 7.24 4600 7.57
DF 625 2320 2670 2900 8885 4.74 9235 4.93 9465 5.05
SP 565 2500 2875 3075 8435 4.98 8810 5.20 9010 5.32
S-P-F 425 2000 2300 2500 6465 5.07 6765 5.31 6965 5.46
Hem Fir 405 2040 2345 2550 6295 5.18 6600 5.43 6805 5.60
DF 625 2320 2670 2900 12165 4.33 12515 4.45 12745 4.53
SP 565 2500 2875 3075 11400 4.48 11775 4.63 11975 4.71
S-P-F 425 2000 2300 2500 8695 4.55 8995 4.70 9195 4.81
Hem Fir 405 2040 2345 2550 8420 4.62 8725 4.79 8930 4.90
DF 625 2320 2670 2900 15445 4.12 15795 4.21 16025 4.27
SP 565 2500 2875 3075 14365 4.24 14740 4.35 14940 4.41
S-P-F 425 2000 2300 2500 10925 4.28 11225 4.40 11425 4.48
Hem Fir 405 2040 2345 2550 10545 4.34 10850 4.47 11055 4.55
DF 625 3165 3640 3955 8320 8.87 8795 9.38 9110 9.72
SP 565 3415 3930 4270 8075 9.53 8590 10.14 8930 10.54
S-P-F 425 2715 3125 3395 6220 9.76 6630 10.40 6900 10.82
Hem Fir 405 2770 3190 3465 6110 10.06 6530 10.75 6805 11.20
DF 625 3250 3735 4060 13565 7.23 14050 7.49 14375 7.67
SP 565 3500 4025 4375 12825 7.57 13350 7.88 13700 8.08
S-P-F 425 2800 3220 3500 9815 7.70 10235 8.03 10515 8.25
Hem Fir 405 2855 3285 3570 9540 7.85 9970 8.21 10255 8.44
DF 625 3250 3735 4060 18720 6.66 19205 6.83 19530 6.94
SP 565 3500 4025 4375 17485 6.88 18010 7.08 18360 7.22
S-P-F 425 2800 3220 3500 13320 6.96 13740 7.18 14020 7.33
Hem Fir 405 2855 3285 3570 12880 7.07 13310 7.30 13595 7.46
DF 625 3250 3735 4060 23875 6.37 24360 6.50 24685 6.58
SP 565 3500 4025 4375 22145 6.53 22670 6.69 23020 6.79
S-P-F 425 2800 3220 3500 16825 6.60 17245 6.76 17525 6.87
Hem Fir 405 2855 3285 3570 16220 6.67 16650 6.85 16935 6.97
1) Allowable loads are for a pair of SBP devices. SBP's shall be installed in pairs.
2) Multiple ply trusses shall be fastened together to act as a single unit.
3) EBL denotes effective bearing length and includes the actual bearing length plus the contribution
of the SBP device.
4) Assumes full seating of truss on top plate.
SBP6 on 2 x 6 Top Plate (5-1/2" wide)
4 Ply
1 Ply
2 Ply
3 Ply
4 Ply
1 Ply
2 Ply
3 Ply
SBP's Alone
SBP + Truss Bearing
4
Allowable Loads (Lbs.)
1,2,3
SBP4 on 2 x 4 Top Plate (3-1/2" wide)
No. of
Truss
Plies
Wood
Species
F
c
(psi)
W H Type Qty Type
2-7/8" or less 20 10d x 1-1/2
3" or more 20 10d
2-7/8" or less 28 10d x 1-1/2
3" or more 28 10d
1
)
Fastener Schedule is for a
p
air of SBP devices.
2
)
Allowable loads are for a
p
air of SBP devices. SBP's shall be installed in
p
airs.
3
)
Multi
p
le
p
l
y
trusses shall be fastened to
g
ether to act as a sin
g
le unit.
4
)
U
p
lift loads have been increased 60% for wind or seismic loads; no further increase shall be
p
ermitted.
5
)
NAILS: 10d x 1-1/2" nails are 0.148" dia. x 1-1/2" lon
g
, 10d nails are 0.148" dia. x 3" lon
g
.
New
p
roducts or u
p
dated
p
roduct information are desi
g
nated in blue font.
1285
Code
Ref.
10,
R8,
F5
13701280
1280 1285 1370
16 5-1/2 3-1/4 1530 1630148510d8
Fastener Schedule
1,5
SBP4 TBE4 16 3-1/2 3-1/4
USP
Stock No.
Steel
Gauge
Joist
Thickness
Plate
4
4 SBP6 TBE6
F1
160%
DF/SP Allowable
Loads (Lbs.)
2,3
S-P-F Allowable
Loads (Lbs.)
2,3
10d8
Truss
1530 16301485
F2
160%
Uplift
4
160%
F1
160%
F2
160%
Ref.
No.
Dimensions
(in)
Top
Qty
Sides
Qty
Uplift
4
160%
Use the SBP instead of extra truss plies or nail-on scabs to distribute concentrated truss reactions and avoid top plate
crushing. The two-piece design accommodates any number of girder plies. A wraparound design gives superior uplift
resistance, and reinforcement ribs effectively distribute bearing loads. Works with both single and double 2x4 or 2x6 top plates.
Materials: 16 gauge
Finish: G90 galvanizing
Codes: See page 11 for Code Reference Chart
Installation:
• Use all specied fasteners. See Product Notes, page 17.
• The SBP shall be installed in pairs.
Typical SBP
installation
SBP
Plated Truss
H
W
2"
1"
F2
F1