Technical Specifications

93
Angles & Straps
© 2015 MiTek. All rights reserved.
Ornamental notching provides architectural appearance
for exposed applications.
Materials: See chart
Finish: USP primer
Options: Available for special order in black primer coated nish.
Codes: See page 11 for Code Reference Chart
Installation:
• Use all specied fasteners. See Product Notes, page 17.
• Connectors are not load rated.
• Bolts must be ordered separately. See page 24 for available sizes.
L12-0
L6
KHL33-O
2-1/2"
3-1/4"
3-1/4"
LH12
T1212-0
T6
TH16
Ornamental
L & T – 14 gauge medium-capacity straps fasten with either nails or bolts.
LH & TH – 7 gauge heavy-capacity bolt-on strap.
Materials: See chart
Finish: G90 galvanizing; TH12-HDG – Hot-dip galvanized.
Options: See chart for Corrosion Finish Options. Available for special
order in black primer coated nish.
Codes: See page 11 for Code Reference Chart
Installation:
• Use all specied fasteners. See Product Notes, page 17.
• Straps are not load rated.
• Bolts must be ordered separately. See page 24 for available sizes.
L / LH / T / TH Straps
Some model designs
may vary from
illustration shown
Ref. No. Description W H L Qty Dia.
KHL33-O OHA33 7 Heavy Angle 3-1/4 -- -- 2-1/2 2 5/8
KHL36-O OHA36 7 Heavy Angle 3-1/4 -- -- 6 4 5/8
KHST64-O OHS135 7 Strap Tie 6 -- -- 13-1/2 4 3/4
ST12-O OS 12 Strap Tie 2 -- -- 12 4 1/2
L12-O OL 12 'L' Strap 2-1/2 11-7/8 11-7/8 5 1/2
LH12-O OHL 7 'L' Strap 2-1/2 11-7/8 11-7/8 5 5/8
T1212-O OT 12 'T' Strap 2-1/2 11-7/8 14-1/2 6 1/2
TH12-O OHT 7 'T' Strap 2-1/2 11-7/8 11-1/8 4 5/8
TH16-O -- -- 7 'T' Strap 2-1/2 11-7/8 16-1/8 6 5/8
1) All bolts shall meet or exceed the specifications of ASTM A 307.
Bolt Schedule
1
Code
Ref.
120
USP
Stock No.
Steel
Gauge
Dimensions (in)
Ref. No. W H L Qty Dia. Qty Type
T6 66T 14 1-1/2 5 6 3 1/2 12 16d
T8 -- -- 14 2 8 8-1/2 3 1/2 12 16d
T12 128T 14 2 8 12 3 1/2 12 16d
T1212 1212T 14 2 12 12 3 1/2 12 16d
L6 66L 14 1-1/2 6 6 2 1/2 8 16d
L8 88L 14 2 8 8 2 1/2 8 16d
L12 1212L 14 2 12 12 4 1/2 12 16d
TH12-HDG
1212HT,
1212HTHDG
7 2-1/2 12 12 6 5/8 -- -- -- --
TH16 1616HT 7 2-1/2 16 16-1/4 6 5/8 -- -- -- --
LH12 1212HL 7 3 12 12 5 5/8 -- -- -- --
LH16 1616HL 7 2-1/2 16 16 7 5/8 -- -- -- --
1) All bolts shall meet or exceed the specifications of ASTM A 307.
2)
NAILS:
16d nails are 0.162" dia. x 3-1/2" long.
Code
Ref.
120
Dimensions (in)
USP
Stock No.
Bolts Nails
Fastener Schedule
1,2
Steel
Gauge
Corrosion
Finish
Corrosion Finish
Stainless Steel Gold Coat
HDG Triple Zinc
Corrosion Finish Stainless Steel Gold Coat HDG Triple Zinc
Corrosion
Finish
Stainless Steel
Gold Coat
HDG
Triple Zinc
L
H
W
H
H
L
L
W
W
H
L
W
Angles & Straps