Installation Guide

108

MiTek

USP

Product Catalog

Angles & Straps

A / AC / JA / MP Framing Angles

Typical MP

rafter support installation

Typical MP

installation

Typical JA1

installation

JA3JA1

Typical JA7

installation

Typical AC

installation

Typical A3

installation

A3AC

MP – 18 gauge. Field adjustable from 45° to 180° (at)

A3 – 18 gauge. Eliminates toenailing and increases strength

AC – 16 gauge. Features staggered nail patterns which

reduces wood splitting and allows installation on both

sides of the supported member

JA – 14 or 16 gauge. Heavier capacity framing angle

for joist support

Materials: See chart

Finish: G90 galvanizing

Options: See chart for Corrosion Finish Options

Codes: IBC, FL, LA

2-1/4"

Adjust

45° to 180° (flat)

Load

direction

2-1/4"

2-3/4"

1-7/16"

Continued on next page

PAGE 1
Angles & Straps A / AC / JA / MP Framing Angles MP – 18 gauge. Field adjustable from 45° to 180° (flat) Load direction A3 – 18 gauge. Eliminates toenailing and increases strength AC – 16 gauge. Features staggered nail patterns which reduces wood splitting and allows installation on both sides of the supported member JA – 14 or 16 gauge.
PAGE 2
A / AC / JA / MP Framing Angles Angles & Straps Dimensions (in) MiTek USP Stock No. Ref. No. Steel Gauge Fastener Schedule Header W1 W2 L Qty Type 3,4 Joist Qty Type S-P-F DF/SP 1,2 1,2 Allowable Loads (Lbs.) Allowable Loads (Lbs.