Use and Care Manual

119
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Angles & Straps
Angles & Straps
MiTek
®
Product Catalog
SDPT Strap Post Ties
SDPT7-TZ
SDPT5-TZ
Typical SDPT7-TZ
installation
Connects 2x4 stair posts and 4x4 posts to deck rim joist
or stair stringers.
Materials: 14 gauge
Finish: G-185 galvanizing
Installation:
• Use all specied fasteners. See Product Notes, page 18.
• Install units in pairs on 2x4 (SDPT5-TZ) or 4x4 (SDPT7-TZ)
post. Space the connectors 5" apart from center to center
on the post. Use through bolts to fasten connectors to rim
joist or stringer. Do not use lag bolts. Fasten to post with
specied nails (see chart).
Ref. No. Qty Type Qty Dia.
2 x 4 SDPT5-TZ DPT5Z 14 5 10d x 1-1/2 HDG 2 3/8 HDG
4 x 4 SDPT7-TZ DPT7Z 14 5 10d x 1-1/2 HDG 2 3/8 HDG
1) Bolts shall conform to ASTM A 307 or better.
2)
NAILS:
10d x 1-1/2 nails are 0.148" dia. x 1-1/2" long.
Corrosion
Finish
Fastener Schedule
Code
Ref.
--
Post
Size
MiTek USP
Stock No.
Steel
Gauge
Nails
2
Bolts
1
Corrosion Finish
Stainless Steel Gold Coat
HDG Triple Zinc
Corrosion Finish
Stainless Steel Gold Coat HDG Triple Zinc
Corrosion
Finish
Stainless Steel
Gold Coat
HDG
Triple Zinc
1-1/2"
1-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
SDJT14-TZ
Typical SDJT14-TZ
installation
SDJT Joist Tie
Secures 2x joists to posts.
Materials: 14 gauge
Finish: G-185 galvanizing
Installation:
• Use all specied fasteners. See Product Notes, page 18.
• Use with 2x lumber for joists (minimum height is 2x4). Install
with either specied nails or through bolts. Do not use lag bolts.
To ease installation, attach to 4x4 post rst.
Ref. No. Qty Type Qty Dia. 100% 115% 125% 100% 115% 125%
4 x 4 SDJT14-TZ DJT14Z 14 8 16d HDG 2 3/8 HDG 1120 1290 1400 1400 1400 1400 --
1) Bolts shall conform to ASTM A 307 or better.
2)
NAILS:
16d HDG nails are 0.162" dia. x 3-1/2" long.
DF/SP
Allowable Loads (Lbs.)
Fastener Schedule
Code
Ref.
Post
Size
Nails Bolts
MiTek USP
Stock No.
Steel
Gauge
Nails
2
Bolts
1
Corrosion
Finish
3-1/8"
3-1/8"
2-3/4"
Corrosion Finish
Stainless Steel Gold Coat
HDG Triple Zinc
Corrosion Finish
Stainless Steel Gold Coat HDG Triple Zinc
Corrosion
Finish
Stainless Steel
Gold Coat
HDG
Triple Zinc