Use and Care Manual

138
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Lumber Hangers
Lumber Hangers
MiTek
®
Product Catalog
Hanger
Type
MiTek
USP
Series
Steel
Gauge
Formed Welded
Masonry
100%
DF/SP
100%
JL 20 •• • • • • -- 470 - 1,960
139, 142-143,
154-155
FB 18 • •• -- 315 - 330 184
JUS 18 • • • • • ••• -- 675 - 2,420
140, 142-150,
154-162
CSH 18 •• • • • •-- 890 181
MUS 18 • • • • • • •••• -- 1,285 - 1,710
140, 142-143,
154-155
JLIF 18 •• • ••• -- 465 - 1,520
139, 142-143,
154-155
SUH 16 • • • • • •• -- 500 - 2,645
139, 142-151,
153-163, 165
16
14
HD 14 • • • • • • •••• -- 615 - 4,620 141-165
ADTT 14 • ••• • • --
790 - 850
1
182
DTB 14 • • • • • • --
1835
1
183
HDQIF 14 • • • • •• • •••• -- 3,340 - 5,605
141, 144-152,
156-164
FWH 14 •• • ••••• • • •••• -- 2,045 - 2,980 194-195
FWHBP 12 •• • • • •••• -- 5,695 - 8,015 196-197
FWHFM 12 • • • • •••• -- 5,960 200-201
FWHH 12 •• • • • • • • -- 6, 005 - 7,355 198-199
HL 18 • • • • • ••• -- 1,255 - 1,490 166, 169
JH 18 •• • • • • -- 1,910 - 2,555 172
KLB 14 •• • • •• -- 1,670 - 2,140 166, 169
KB 12 • • • • ••• -- 4,075 - 4,795 166, 170-171
HDO 12 • • • • ••• -- 2,405 - 5,845 167, 169-171
SW 12 • • •• • •• -- 2,315 - 2,520 168-170
SWH
7 -
Top Flange;
12 - Stirrup
• • •• • ••• -- 3,305 168-171
KHW
3 -
Top Flange;
10 - Stirrup
• • •• • ••• -- 5,295 - 5,535 168, 170-171
RR 18 • • • • • • • -- 365 - 380 173
LS 18 • ••• •••--840 - 1,285 173
18
16
16
14
SKHH 14 • • •• • • ••• -- 1,765 - 4,005 175-176
JPF 20 •• • • • • -- 1,035 178
DTUS 20 • • •• • • • -- 485 - 580 180
TUS 20 • • •• • • • -- 485 - 580 180
KF 18 •••••• • -- 695 - 810 177
PHG 18 ••••••• -- 580 - 650 177
FHD 18 •• • • • -- 960 181
JDS 18 ••••••• -- 480 - 1,675 179
HD 14 • • •• • •••• 335 - 5750 -- 186
MPH 12 •
• • ••••
2,585 - 4,280 -- 188-189
LGUM 12 •
••••
6,065 - 9,905 -- 187
HGUM 7 •
• • •••
16,680 -- 187
HWUH
1/4" -
Top Flange;
7 - Stirrup
•
• • •• • •••
3,060 - 5,265 -- 190-191
UMH 1/4" •
• • •••
3,550 - 6,380 -- 185
NFM
3/8" -
Top Flange;
7 - Stirrup
•
• • •••
6,720 - 10,310 -- 192-193
• Re
p
resents common a
pp
lications and
p
roduct confi
g
urations. Consult MiTek for additional a
pp
lications and/or o
p
tional
p
roduct confi
g
urations.
1
)
Allowable loads reflect DF/SP Tension 160%.
2
)
When an I-Joist is used as a header
,
desi
g
ner must evaluate if a web stiffener or backer block is re
q
uired.
New products or updated product information are designated in blue font.
-- 510 - 3,170
MiTek USP Series Catalog Page Reference
140, 142-145,
149-150, 154-
157, 161-162
174
175-176
Allowable Loads (Lbs.)
Range
Header Material
850 - 5,580
Stringer
620 - 2,645
--
--
••
•
• •••
•
•
Masonry
•
•
Slope
and
Skew
•
Panel
and
Purlin
SKH
Top
Mount
Face
Mount
LSSH
HUS
Fire
Wall
•
•
••
••• • •••
•
••
Rim Joist
••
Style
I-Joist Truss (2x) Floor Truss 4x Glulam Beam/Joist/Rafter (rect shapes) Beam/Joist/Rafter (rect shapes)
Supported /
Joist Member
Supporting /
Header Member
Truss (2x) Floor Truss 4x Nailer Wall Post Glulam I-Joist
Hanger Selector Guide
• Represents common
applications and product
congurations. Consult
MiTek for additional
applications and/or optional
product congurations.
1) Allowable loads reect
DF/SP Tension 160%.
2) When an I-Joist is used as
a header, designer must
evaluate if a web stiffener or
backer block is required.
New products or updated
product information are
designated in blue font.