Use and Care Manual
EWP Hangers
221
MiTek
®
Product Catalog
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
EWP Hangers
Top Mount Hanger Charts
Fastener Schedule
5
Uplift
2
DF/SP
Ref. No. Ga W H D L TF Type Qty Type LVL PSL LSL SPF DF/SP
160%
THO15925 -- -- 18 1-9/16 9-1/4 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1235 1235 1235 955 1005 1235 230
BPH15925 -- x 12 1-9/16 9-1/4 2-3/8 -- 1-1/2 4 6 16d 4 10d x 1-1/2 2830 2830 2830 2095 -- 2825 850
THO15950 -- -- 18 1-1/2 9-1/2 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1235 1235 1235 955 1090 1235 230
BPH1595 BA1.56/9.5 x 12 1-9/16 9-1/2 2-3/8 -- 1-1/2 4 6 16d 4 10d x 1-1/2 2830 2830 2830 2095 -- 2825 850
1-1/2 x 11-1/4 BPH15112 -- x 12 1-9/16 11-1/4 2-3/8 -- 1-1/2 4 6 16d 4 10d x 1-1/2 2830 2830 2830 2095 -- 2825 850
THO15118 ITS1.56/11.88 -- 18 1-1/2 11-7/8 2 -- 1-9/16 4 2 10d 2 10d x 1-1/2 1235 1235 1235 955 1205 1235 230
BPH15118 BA1.56/11.88 x 12 1-9/16 11-7/8 2-3/8 -- 1-1/2 4 6 16d 4 10d x 1-1/2 2830 2830 2830 2095 -- 2825 850
THO15140 -- -- 16 1-9/16 14 2-3/8 -- 1-1/2 4 6 10d 2 10d x 1-1/2 1235 1235 1235 950 1030 1235 230
BPH1514 -- x 12 1-9/16 14 2-3/8 -- 1-1/2 4 6 16d 4 10d x 1-1/2 2830 2830 2830 2095 -- 2825 850
1-5/8 x 9-1/2 THO16950 -- -- 18 1-11/16 9-1/2 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1235 1235 1235 955 1005 1235 230
1-5/8 x 11-1/4 THO16112 -- -- 16 1-11/16 11-1/4 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1235 1235 1235 955 1030 1235 230
1-5/8 x 11-7/8 THO16118 -- -- 16 1-11/16 11-7/8 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1235 1235 1235 955 1030 1235 230
1-5/8 x 14 THO16140 -- -- 16 1-11/16 14 3 -- 1-3/4 4 6 10d 2 10d x 1-1/2 2370 2370 2370 2185 1030 2370 230
1-3/4 x 7-1/4 PHXU17725 WP1.81 H=7.25 x 7 1-13/16 7-1/4 3-1/4 10 2-1/2 4 4 16d 6 10d x 1-1/2 4350 4350 4350
3245
-- 4350 930
BPH17925 BA1.81/9.25 x 12 1-13/16 9-1/4 2-3/8 -- 1-11/16 4 6 16d 4 10d x 1-1/2 2970 2970 2970 2300 -- 2970 850
PHM17925 WP1.81 H=9.25 x 7/10 1-13/16 9-1/4 2-1/2 7 3 2 -- 16d 2 10d x 1-1/2 3335 3335 3335 2140 -- 3060 --
PHXU17925 -- x 7 1-13/16 9-1/4 3-1/4 10 2-1/2 4 4 16d 6 10d x 1-1/2 4350 4350 4350
3245
-- 4350 930
THO17950 ITS1.81/9.5 -- 18 1-3/4 9-1/2 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1235 1235 1235 950 1235 1235 230
BPH1795
BA1.81/9.5,
MIT9.5
x 12 1-13/16 9-1/2 2-3/8 -- 1-11/16 4 6 16d 4 10d x 1-1/2 2970 2970 2970 2300 -- 2970 850
PHM1795 WP1.81 H=9.5 x 7/10 1-13/16 9-1/2 2-1/2 7 3 2 -- 16d 2 10d x 1-1/2 3335 3335 3335 2140 -- 3060 --
PHXU1795 -- x 7 1-13/16 9-1/2 3-1/4 10 2-1/2 4 4 16d 6 10d x 1-1/2 4350 4350 4350
3245
-- 4350 930
BPH17112 BA1.81/11.25 x 12 1-13/16 11-1/4 2-3/8 -- 1-11/16 4 6 16d 4 10d x 1-1/2 2970 2970 2970 2300 -- 2970 850
PHM17112 WP1.81 H=11.25 x 7/10 1-13/16 11-1/4 2-1/2 7 3 2 -- 16d 2 10d x 1-1/2 3335 3335 3335 2140 -- 3060 --
PHXU17112 -- x 7 1-13/16 11-1/4 3-1/4 10 2-1/2 4 4 16d 6 10d x 1-1/2 4350 4350 4350
3245
-- 4350 930
THO17118
ITS1.81/11.88,
MIT11.88
-- 18 1-3/4 11-7/8 2 -- 1-9/16 4 2 10d 2 10d x 1-1/2 1235 1235 1235 950 1235 1235 230
BPH17118 BA1.81/11.88 x 12 1-13/16 11-7/8 2-3/8 -- 1-11/16 4 6 16d 4 10d x 1-1/2 2970 2970 2970 2300 -- 2970 850
PHM17118 WP1.81 H=11.875 x 7/10 1-13/16 11-7/8 2-1/2 7 3 2 -- 16d 2 10d x 1-1/2 3335 3335 3335 2140 -- 3060 --
PHXU17118 -- x 7 1-13/16 11-7/8 3-1/4 10 2-1/2 4 4 16d 6 10d x 1-1/2 4350 4350 4350
3245
-- 4350 930
TFL1714 ITS1.81/14 -- 18 1-3/4 14 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
BPH1714
BA1.81/14,
MIT1.81/14
x 12 1-13/16 14 2-3/8 -- 1-11/16 4 6 16d 4 10d x 1-1/2 2970 2970 2970 2300 -- 2970 850
PHM1714 WP1.81 H=14 x 7/10 1-13/16 14 2-1/2 7 3 2 -- 16d 2 10d x 1-1/2 3335 3335 3335 2140 -- 3060 --
PHXU1714 -- x 7 1-13/16 14 3-1/4 10 2-1/2 4 4 16d 6 10d x 1-1/2 4350 4350 4350
3245
-- 4350 930
TFL1716 ITS1.81/16 -- 18 1-3/4 16 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
BPH1716
BA1.81/16,
MIT1.81/16
x 12 1-13/16 16 2-3/8 -- 1-11/16 4 6 16d 4 10d x 1-1/2 2970 2970 2970 2300 -- 2970 850
PHM1716 WP1.81 H=16 x 7/10 1-13/16 16 2-1/2 7 3 2 -- 16d 2 10d x 1-1/2 3335 3335 3335 2140 -- 3060 --
2 - 2-1/8 x 9-1/2 TFL2095 ITS2.06/9.5 -- 18 2-1/8 9-1/2 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
2 - 2-1/8
x 11-7/8
TFL20118 ITS2.06/11.88 -- 18 2-1/8 11-7/8 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
2 - 2-1/8 x 14 TFL2014 ITS2.06/14 -- 18 2-1/8 14 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
1) When I-joist is used as a header, all header nails must be 10d (0.148") x 1-1/2.
2) Uplift loads have been increased 60% for wind or seismic loads; no further increase shall be permitted
3) Some listed loads may be increased for short-term loading. Refer to MiTek code evaluation reports for details.
4) When I-Joists with flanges less than 1-1/2" thick are used as headers, the reduction factor for 1-1/4" flange is 0.69 and 0.84 for 1-3/8" flange.
5) NAILS: 10d x 1-1/2 nails are 0.148" dia. x 1-1/2" long, 10d nails are 0.148" dia. x 3" long, 16d nails are 0.162" dia. x 3-1/2" long.
Load tables address hanger/header/fastener limitations only. Joist limitations must be determined for each installation.
New products or updated product information are designated in blue font.
Joist Size
(in)
DF
I-Joist
4
Code
Ref.
Dimensions (in)
MiTek USP
Stock No.
Allowable Loads Header Type (Lbs.)
1,3
Download 100%
Web
Stiff
Reqd
Header Joist
Top
Qty
Face
Qty
IBC,
FL,
LA
1-1/2 x 9-1/4
1-1/2 x 9-1/2
1-3/4 x 11-1/4
1-3/4 x 11-7/8
1-3/4 x 9-1/2
1-1/2 x 11-7/8
1-1/2 x 14
1-3/4 x 9-1/4
1-3/4 x 14
1-3/4 x 16
H
W
L
TF
D
Continued on next page