Use and Care Manual

Lumber Hangers
183
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Lumber Hangers
MiTek
®
Product Catalog
DF/SP S-P-F
Ref. No. W L D CL Qty Bol
t
3
Qty Screws
1
DTB-TZ
DTT2Z,
FSC
14 1-13/16 6 2-1/4 1-1/8 1 1/2 8 WS15-EXT 1835 1510 0.119
IBC,
FL, LA
1
)
MiTek's WS15-EXT structural wood screws are 1/4" dia. x 1-1/2" lon
g
and are included with DTB-TZ Deck Tie-Backs.
2
)
Deflections are derived from static, monotonic load tests of devices connected to DF wood members with s
p
ecified fasteners.
3
)
Minimum ASTM A307 bolt or 1/2" threaded rod with cut washer and hex nut.
New
p
roducts or u
p
dated
p
roduct information are desi
g
nated in blue font.
MiTek USP
Stock No.
Tension
160%
Dimensions (in)
Corrosion
Finish
Steel
Gauge
Fastener Schedule
Wall Joist
Tension
160%
Deflection
Δ (in)
at 160%
2
Allowable Loads (Lbs.)
Corrosion Finish
Stainless Steel Gold Coat
HDG Triple Zinc
Corrosion Finish Stainless Steel Gold Coat HDG Triple Zinc
Corrosion
Finish
Stainless Steel
Gold Coat
HDG
Triple Zinc
DTB Deck Tie Back
The DTB-TZ Deck Tie Back provides positive anchorage between the
deck framing and the exterior wall with a load carrying capacity that
exceeds building code requirements. When used in conjunction with
MiTek’s triple-zinc or gold-coat joist hangers, the DTB-TZ transfers
the lateral loads into the exterior wall while the joist hangers support
the vertical loads. The DTB-TZ can also be used to reinforce the
connection between the rail post and the deck.
Materials: 14 gau ge
Finish: G-185 galvanizing
Options: See chart for Corrosion Finish Options
Codes: IBC, FL, LA
Installation:
Use all specied fasteners. See Product Notes, page 18.
Install with MiTek’s THR 1/2" threaded rod or equivalent.
Drive MiTek’s WS15-EXT structural wood screws into joist.
Re-install threaded rod or anchor bolt. Secure with washer and nut.
Tighten anchor bolt nuts nger tight to base plus 13 to 12
additional turns with wrench.
Typical DTB-TZ
rail post installation
Typical DTB-TZ deck
to ledger installation
DTB-TZ
6"
2-1/4"
CL
1-13/16"
1/2" THR
Threaded
Rod pg. 47