Manualshelf

Use and Care Manual

ManualsBrandsMiTek ManualsBuilding Hardware1-1/2 in. x 1-1/2 in. x 1-1/4 in. G185 16-Gauge Framing Angle (1-Pack)
181182183184185186187188189190
Lumber Hangers
189
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Lumber Hangers
MiTek
®
Product Catalog
MPH Masonry Hangers
Floor
Ref. No. W H L Qty Type Qty Type 100% 115% 125%
2 x 10 MPH210 WMU1.56/9.25 12 1-9/16 9-1/4 7 2 16d duplex 2 10d x 1-1/2 2610 2650 2675
2 x 12 MPH212 WMU1.56/11.25 12 1-9/16 11-1/4 7 2 16d duplex 2 10d x 1-1/2 2610 2650 2675
2 x 14 MPH214 WMU1.56/14 12 1-9/16 13-1/8 7 2 16d duplex 2 10d x 1-1/2 2610 2650 2675
2 x 16 MPH216 WMU1.56/16 12 1-9/16 15-1/8 7 2 16d duplex 2 10d x 1-1/2 2610 2650 2675
(2) 2 x 10 MPH210-2 WMU3.12/9.25 12 3-1/8 9-1/4 7 2 16d duplex 2 10d 4430 4430 4430
(2) 2 x 12 MPH212-2 WMU3.12/11.25 12 3-1/8 11-1/4 7 2 16d duplex 2 10d 4430 4430 4430
(2) 2 x 14 MPH214-2 WMU3.12/14 12 3-1/8 13-1/8 7 2 16d duplex 2 10d 4430 4430 4430
(2) 2 x 16 MPH216-2 WMU3.12/16 12 3-1/8 15-1/8 7 2 16d duplex 2 10d 4430 4430 4430
3 x 10 MPH310 WMU2.56/9.25 12 2-9/16 9-1/4 7 2 16d duplex 2 10d x 1-1/2 3295 3295 3295
3 x 12 MPH312 WMU2.56/11.25 12 2-9/16 11-1/4 7 2 16d duplex 2 10d x 1-1/2 3295 3295 3295
3 x 14 MPH314 WMU2.56/13.25 12 2-9/16 13-1/8 7 2 16d duplex 2 10d x 1-1/2 3295 3295 3295
3 x 16 MPH316 WMU2.56/15.25 12 2-9/16 15-1/8 7 2 16d duplex 2 10d x 1-1/2 3295 3295 3295
4 x 10 MPH410 WMU3.56/9.25 12 3-9/16 9-1/4 7 2 16d duplex 2 10d 4430 4430 4430
4 x 12 MPH412 WMU3.56/11.25 12 3-9/16 11-1/4 7 2 16d duplex 2 10d 4430 4430 4430
4 x 14 MPH414 WMU3.56/13.25 12 3-9/16 13-1/8 7 2 16d duplex 2 10d 4430 4430 4430
4 x 16 MPH416 WMU3.56/15.25 12 3-9/16 15-1/8 7 2 16d duplex 2 10d 4430 4430 4430
6 x 10 MPH610 WMU5.50/9.5 12 5-9/16 9-1/4 7 2 16d duplex 2 10d 4430 4430 4430
1-1/2 x 9-1/4 MPH210 WMU1.56/9.25 12 1-9/16 9-1/4 7 2 16d duplex 2 10d x 1-1/2 2610 2650 2675
1-1/2 x 9-1/2 MPH1595 WMU1.56/9.5 12 1-9/16 9-1/2 7 2 16d duplex 2 10d x 1-1/2 2610 2650 2675
1-1/2 x 11-1/4 MPH212 WMU1.56/11.25 12 1-9/16 11-1/4 7 2 16d duplex 2 10d x 1-1/2 2610 2650 2675
1-1/2 x 11-7/8 MPH15118 WMU1.56/11.88 12 1-9/16 11-7/8 7 2 16d duplex 2 10d x 1-1/2 2610 2650 2675
1-1/2 x 14 MPH1514 WMU1.56/14 12 1-9/16 14 7 2 16d duplex 2 10d x 1-1/2 2610 2650 2675
1-3/4 x 9-1/2 MPH1795 WMU1.81/9.5 12 1-13/16 9-1/2 7 2 16d duplex 2 10d x 1-1/2 3000 3040 3065
1-3/4 x 11-7/8 MPH17118 WMU1.81/11.88 12 1-13/16 11-7/8 7 2 16d duplex 2 10d x 1-1/2 3000 3040 3065
1-3/4 x 14 MPH1714 WMU1.81/14 12 1-13/16 14 7 2 16d duplex 2 10d x 1-1/2 3000 3040 3065
1-3/4 x 16 MPH1716 WMU1.81/16 12 1-13/16 16 7 2 16d duplex 2 10d x 1-1/2 3000 3040 3065
1
)
Masonr
y
com
p
ressive stren
g
th shall be minimum 1500
p
si.
2
)
NAILS: 10d x 1-1/2 nails are 0.148" dia. x 1-1/2" lon
g
, 10d nails are 0.148" dia. x 3" lon
g
, 16d du
p
lex nails are 0.162" dia. x 3-1/2" lon
g
,
double headed nails and shall be installed in
g
routed cells in accordance to manufacturer's installation s
p
ecifications.
New
p
roducts or u
p
dated
p
roduct information are desi
g
nated in blue font.
Floor
Ref. No. W H L Qty Type Qty Type 100% 115% 125%
2-5/16 x 9-1/2 MPH2395 WMU2.37/9.5 12 2-3/8 9-1/2 7 2 16d duplex 2 10d x 1-1/2 3880 3920 3945
2-5/16 x 11-7/8 MPH23118 WMU2.37/11.88 12 2-3/8 11-7/8 7 2 16d duplex 2 10d x 1-1/2 3880 3920 3945
2-5/16 x 14 MPH2314 WMU2.37/14 12 2-3/8 14 7 2 16d duplex 2 10d x 1-1/2 3880 3920 3945
2-5/16 x 16 MPH2316 WMU2.37/16 12 2-3/8 16 7 2 16d duplex 2 10d x 1-1/2 3880 3920 3945
2-5/16 x 18 MPH2318 WMU2.37/18 12 2-3/8 18 7 2 16d duplex 2 10d x 1-1/2 3880 3920 3945
2-5/16 x 20 MPH2320 WMU2.37/20 12 2-3/8 20 7 2 16d duplex 2 10d x 1-1/2 3880 3920 3945
2-1/2 x 9-1/4 MPH25925 WMU2.56/9.25 12 2-1/2 9-1/4 7 2 16d duplex 2 10d x 1-1/2 4170 4210 4240
2-1/2 x 9-1/2 MPH2595 WMU2.56/9.5 12 2-1/2 9-1/2 7 2 16d duplex 2 10d x 1-1/2 4170 4210 4240
2-1/2 x 11-1/4 MPH25112 WMU2.56/11.25 12 2-1/2 11-1/4 7 2 16d duplex 2 10d x 1-1/2 4170 4210 4240
2-1/2 x 11-7/8 MPH25118 WMU2.56/11..88 12 2-1/2 11-7/8 7 2 16d duplex 2 10d x 1-1/2 4170 4210 4240
2-1/2 x 14 MPH2514 WMU2.56/14 12 2-1/2 14 7 2 16d duplex 2 10d x 1-1/2 4170 4210 4240
2-1/2 x 16 MPH2516 WMU2.56/16 12 2-1/2 16 7 2 16d duplex 2 10d x 1-1/2 4170 4210 4240
2-1/2 x 18 MPH2518 WMU2.56/18 12 2-1/2 18 7 2 16d duplex 2 10d x 1-1/2 4170 4210 4240
2-1/2 x 20 MPH2520 WMU2.56/20 12 2-1/2 20 7 2 16d duplex 2 10d x 1-1/2 4170 4210 4240
2-1/2 x 22 MPH2522 WMU2.56/22 12 2-1/2 22 7 2 16d duplex 2 10d x 1-1/2 4170 4210 4240
2-1/2 x 24 MPH2524 WMU2.56/24 12 2-1/2 24 7 2 16d duplex 2 10d x 1-1/2 4170 4210 4240
2-1/2 x 26 MPH2526 WMU2.56/26 12 2-1/2 26 7 2 16d duplex 2 10d x 1-1/2 4170 4210 4240
3 x 9-1/4 MPH210-2 WMU3.12/9.25 12 3-1/8 9-1/4 7 2 16d duplex 2 10d 4430 4430 4430
3 x 9-1/2 MPH1595-2 WMU3.12/9.5 12 3-1/8 9-1/2 7 2 16d duplex 2 10d 4430 4430 4430
3 x 11-1/4 MPH15112-2 WMU3.12/11.25 12 3-1/8 11-1/4 7 2 16d duplex 2 10d 4430 4430 4430
3 x 11-7/8 MPH15118-2 WMU3.12/11.88 12 3-1/8 11-7/8 7 2 16d duplex 2 10d 4430 4430 4430
3-1/2 x 12 MPH3512 WMU3.62/12 12 3-1/2 12 7 2 16d duplex 2 10d 4430 4430 4430
3-1/2 x 14 MPH3514 WMU3.62/14 12 3-1/2 14 7 2 16d duplex 2 10d 4430 4430 4430
3-1/2 x 16 MPH3516 WMU3.62/16 12 3-1/2 16 7 2 16d duplex 2 10d 4430 4430 4430
3-1/2 x 18 MPH3518 WMU3.62/18 12 3-1/2 18 7 2 16d duplex 2 10d 4430 4430 4430
3-1/2 x 20 MPH3520 WMU3.62/20 12 3-1/2 20 7 2 16d duplex 2 10d 4430 4430 4430
3-1/2 x 9-1/4 MPH410 WMU3.56/9.25 12 3-9/16 9-1/4 7 2 16d duplex 2 10d 4430 4430 4430
3-1/2 x 11-1/4 MPH412 WMU3.56/11.25 12 3-9/16 11-1/4 7 2 16d duplex 2 10d 4430 4430 4430
3-1/2 x 9-1/2 MPH1795-2 WMU3.56/9.5 12 3-5/8 9-1/2 7 2 16d duplex 2 10d 4430 4430 4430
3-1/2 x 11-7/8 MPH17118-2 WMU3.56/11.88 12 3-5/8 11-7/8 7 2 16d duplex 2 10d 4430 4430 4430
4-5/8 x 11-7/8 MPH23118-2 WMU4.75/11.88 12 4-5/8 11-7/8 7 2 16d duplex 2 10d 4430 4430 4430
4-5/8 x 14 MPH2314-2 WMU4.75/14 12 4-5/8 14 7 2 16d duplex 2 10d 4430 4430 4430
4-5/8 x 16 MPH2316-2 WMU4.75/16 12 4-5/8 16 7 2 16d duplex 2 10d 4430 4430 4430
4-5/8 x 18 MPH2318-2 WMU4.75/18 12 4-5/8 18 7 2 16d duplex 2 10d 4430 4430 4430
4-5/8 x 20 MPH2320-2 WMU4.75/20 12 4-5/8 20 7 2 16d duplex 2 10d 4430 4430 4430
5-1/4 x 9-1/2 MPH5595 WMU5.50/9.5 12 5-5/8 9-1/2 7 2 16d duplex 2 10d 4430 4430 4430
5-1/4 x 11-7/8 MPH55118 WMU5.50/11.88 12 5-5/8 11-7/8 7 2 16d duplex 2 10d 4430 4430 4430
7 x 9-1/2 MPH3595-2 WMU7.12/9.5 12 7-1/8 9-1/2 8 2 16d duplex 2 10d 4490 4490 4490
7 x 11-1/4 MPH35112-2 WMU7.12/11.25 12 7-1/8 11-1/4 8 2 16d duplex 2 10d 4490 4490 4490
7 x 11-7/8 MPH35118-2 WMU7.12/11.88 12 7-1/8 11-7/8 8 2 16d duplex 2 10d 4490 4490 4490
7 x 14 MPH3514-2 WMU7.12/14 12 7-1/8 14 8 2 16d duplex 2 10d 4490 4490 4490
7 x 16 MPH3516-2 WMU7.12/16 12 7-1/8 16 8 2 16d duplex 2 10d 4490 4490 4490
7 x 18 MPH3518-2 WMU7.12/18 12 7-1/8 18 8 2 16d duplex 2 10d 4490 4490 4490
3-1/8 x glulam MPH325 WMU3.25X 12 3-1/4 specify 7 2 16d duplex 2 10d 4430 4430 4430
5-1/8 x glulam MPH525 WMU5.25X 12 5-1/4 specify 7 2 16d duplex 2 10d 4430 4430 4430
1
)
Masonr
y
com
p
ressive stren
g
th shall be minimum 1500
p
si.
2
)
NAILS: 10d x 1-1/2 nails are 0.148" dia. x 1-1/2" lon
g
, 10d nails are 0.148" dia. x 3" lon
g
, 16d du
p
lex nails are 0.162" dia. x 3-1/2" lon
g
,
double headed nails and shall be installed in
g
routed cells in accordance to manufacturer's installation s
p
ecifications.
New
p
roducts or u
p
dated
p
roduct information are desi
g
nated in blue font.
Steel
Gauge
Roof
IBC,
FL,
LA
Dimensions (in)
Steel
Gauge
Block Joist
Roof
Fastener Schedule
2
DF/SP
Allowable Loads (Lbs.)
1
Engineered Lumber Sizes
Standard Lumber Sizes
Glulam Sizes
IBC,
FL, LA
Beam/
Joist Size
MiTek USP
Stock No.
Code
Ref.
IBC,
FL,
LA
Engineered Lumber Sizes
Dimensions (in)
Fastener Schedule
2
DF/SP
Allowable Loads (Lbs.)
1
Block
IBC,
FL,
LA
Code
Ref.
Joist
Beam/
Joist Size
MiTek USP
Stock No.
Specialty Options Chart – Refer to Specialty Options pages 320, 322-323 for additional details.
Option
Skewed
1,3
Sloped Seat
2
Sloped / Skewed
1,2,3
Top Flange Offset
Range
1˚ to 60˚ 1˚ to 45˚ See Sloped Seat and Skewed
1) Skewed hangers with skews greater than 15° may have all joist nailing on outside flange.
2) Sloped or sloped / skewed hangers with slopes greater than 15° may have additional joist nails.
3) For skewed hangers, the required cut type (square or bevel) of joist member may vary based on skew angle
and width of hanger. Some square cut hangers will require custom pricing due to welded back plate.
--
See Sloped Seat and Skewed.
Ex. MPH210_SK45R_SQ_SL30D
Add
OS,
and
right
(R)
or left
(L),
to product number.
Ex. MPH210_OSL
Allowable
Loads
Ordering
100% of table load
Add
SK,
angle required,
right
(R)
or left
(L),
and
square cut
(SQ)
or bevel cut
(BV)
to product number.
Ex. MPH210_SK45R_SQ
Add
SL,
slope required,
and up
(U)
or down
(D),
to product number.
Ex. MPH210_SL30D
100% of table load 100% of table load
Hanger Width
3-1/2" or less
3-9/16" to 5-1/2"
5-9/16" to 7-1/2"
% of table load:
60%
75%
85%
1) Skewed hangers with skews greater
than 15° may have all joist nailing on
outside ange.
2) Sloped or sloped / skewed hangers
with slopes greater than 15° may
have additional joist nails.
3) For skewed hangers, the required cut
type (square or bevel) of joist member
may vary based on skew angle and
width of hanger. Some square cut
hangers will require custom pricing
due to welded back plate.