Manualshelf

Use and Care Manual

ManualsBrandsMiTek ManualsBuilding Hardware1-1/2 in. x 1-1/2 in. x 1-1/4 in. G185 16-Gauge Framing Angle (1-Pack)
191192193194195196197198199200
Lumber Hangers
191
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Lumber Hangers
MiTek
®
Product Catalog
HWUH Heavy-Duty Welded Universal Hangers
Floor
Uplift
1
W H Qty Type Qty Type 100% 115% 125% 160%
Wood 6 10d 3925 4020 4085 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 3925 4020 4085 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 3925 4020 4085 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 3925 4020 4085 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 3925 4020 4085 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 3925 4020 4085 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 4615 4615 4615 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 4615 4615 4615 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 4615 4615 4615 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 4615 4615 4615 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 4615 4615 4615 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 4615 4615 4615 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 4615 4615 4615 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 4615 4615 4615 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 4615 4615 4615 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 4615 4615 4615 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 4615 4615 4615 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 10d 4615 4615 4615 955
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
1) Uplift loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.
2)
NAILS:
10d nails are 0.148" dia. x 3" long.
Floor
Uplift
1
W H Qty Type Qty Type 100% 115% 125% 160%
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
Wood 6 NA21 5265 5265 5265 675
Masonry 2 1/2" x 6" J-Bolt 3060 3060 3060 1030
1) Uplift loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.
2)
NAILS:
NA21 nails are 0.192" dia. x 1-3/4" long and are included with 4x, 6x, and 8x HWUH hangers.
--
--
Dimensions
(in)
Fastener Schedule
2
Supporting Member
Supported
Member
Wood Roof
Code
Ref.
DF/SP
Allowable Loads (Lbs.)
Installation
Type
7-1/2
7-1/2
7-1/2
7-1/2
11
13
16
11
13
16
5-3/8
7-1/8
9-1/8
5-1/2
5-1/2
5-1/2
7-1/2
7-1/2
5-1/2 5-3/8
5-1/2 7-1/8
5-1/2 9-1/8
11
13
16
3-1/8
3-1/8
3-1/8
3-1/8
3-9/16
5-3/8
7-1/8
9-1/8
11
13
16
3-9/16
3-9/16
3-9/16
3-9/16
3-9/16
5-3/8
7-1/8
9-1/8
11
13
16
11
7-1/8
9-1/8
13
16
5-3/8
HWUH816
1-5/8 5-3/8
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
2-5/8
2-5/8
2-5/8
2-5/8
2-5/8
2-5/8
3-1/8
3-1/8
HWUH86
HWUH88
HWUH810
HWUH812
HWUH814
HWUH68
HWUH610
HWUH612
HWUH614
HWUH616
HWUH410
HWUH412
HWUH414
HWUH416
HWUH66
HWUH212-2
HWUH214-2
HWUH216-2
HWUH46
HWUH48
MiTek USP
Stock No.
8 x 16
HWUH26
HWUH28
HWUH210
HWUH212
HWUH214
HWUH216
HWUH36
HWUH38
HWUH310
HWUH312
HWUH314
HWUH316
HWUH26-2
HWUH28-2
HWUH210-2
8 x 6
8 x 8
8 x 10
8 x 12
8 x 14
6 x 8
6 x 10
6 x 12
6 x 14
6 x 16
4 x 10
4 x 12
4 x 14
4 x 16
6 x 6
(2) 2 x 12
(2) 2 x 14
(2) 2 x 16
4 x 6
4 x 8
Beam/
Joist Size
--
2 x 4 - 6
2 x 8
2 x 10
2 x 12
2 x 14
2 x 16
3 x 6
3 x 8
3 x 10
3 x 12
3 x 14
3 x 16
(2) 2 x 6
(2) 2 x 8
(2) 2 x 10
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Ref. No.
--
--
--
--
--
--
--
--
--
4 10d
4 10d
4 10d
4 10d
4 10d
4 10d
4 10d
4 10d
4 10d
4 10d
4 10d
4 10d
4 10d
4 10d
4 10d
10d
4 10d
4 10d
4 10d
4 10d
4 10d
4
4 10d
4 10d
4 10d
4 10d
4 10d
4 10d
4 10d
4 10d
4 10d
10d x 1-1/2
4 10d x 1-1/2
4 10d x 1-1/2
Beam/
Joist Size
MiTek USP
Stock No.
Wood Roof
4 10d x 1-1/2
4 10d x 1-1/2
4
--
--
--
--
--
7-1/8
9-1/8
Code
Ref.
Supported
Member
DF/SP
Allowable Loads (Lbs.)
Installation
TypeRef. No.
Dimensions
(in)
Supporting Member
Fastener Schedule
2
4 10d x 1-1/2
--
Specialty Options Chart
Refer to Specialty Options pages 320, 322-323 for additional details.
Option
Skewed
1,3
Sloped Seat
2
Sloped / Skewed
1,2,3
Saddle
Range
1˚ to 45˚ 1˚ to 45˚ See Sloped Seat and Skewed --
1) Skewed hangers with skews greater than 15° may have all joist nailing on outside flange.
2) Sloped or sloped / skewed hangers with slopes greater than 15° may have additional joist nails.
3) For skewed hangers, the required cut type (square or bevel) of joist member may vary based on skew angle
and width of hanger. Some square cut hangers will require custom pricing due to welded back plate.
Add
SA,
and saddle
width required
to product number.
Ex. HWUH410_SA=5-1/2"
% of table
load:
60%
75%
85%
Add
SL,
slope required,
and up
(U)
or down
(D),
to product number.
Ex. HWUH410_SL30D
See Sloped Seat and Skewed.
Ex. HWUH410_SK45R_SQ_SL30D
Add
OS,
and
right
(R)
or left
(L),
to product number.
Ex. HWUH410_OSL
100% of table load
per side
Top Flange Offset
--
Allowable
Loads
Ordering
100% of table load
Add
SK,
angle required,
right
(R)
or left
(L),
and
square cut (
SQ
) or bevel cut (
BV
)
to product number.
Ex. HWUH410_SK45R_SQ
100% of table load 100% of table load
Hanger
Width
3-1/2" or less
3-9/16" to 5-1/2"
5-9/16"˝ to 7-1/2"