Use and Care Manual

204
MiTek
®
Product Catalog
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
EWP Hangers
EWP Hangers
Hanger
Type
MiTek
USP
Series
Steel
Gauge
LVL
100%
DF/SP
100%
THF 16 or 12 • • • • ••• 1,890 - 3,190 1,890 - 3,190 207, 213
THFI 18 • • • • ••• 960 - 1,680 960 - 1,680 205, 212
IHFL 18 •••••••960 - 1,920 960 - 1,920 206, 211-213
IHF 16 •••• ••1,000 - 4,410 1,000 - 4,410 206, 211-213
HUS 16 •• • ••••2,760 - 5,580 2,760 - 5,580 209, 214
HD 14 • • • • • •••• 1,850 - 4,620 1,850 - 4,620 208, 213-216
HDQIF 14 • • • •• • •••• 3,340 - 5,605 3,340 - 5,605 209, 214-216
THD 14 or 12 • • • • •••• 5,850 - 8,285 5,850 - 8,285 210, 215-216
THDH 12 • • • • •••• 9,020 - 11,325 9,020 - 11,325 210, 214-216
TFL 18 • • ••• • ••• 1,585 1,585 217, 221-222
THO 18, 16 or 12 • • ••• • ••• 1,235 - 5,660 1,235 - 5,000 217, 221-226
TFI 16 • • ••• • ••• 2,715 - 2,820 2,715 - 2,820
217, 222,
224-225
BPH 12 • ••••• • • •••• 2,830 - 3,100 2,825 - 3,100
218, 221,
223-229
HBPH 10 • ••• • • ••• 6,185 - 6,310 6,185 - 6,310 218, 223-229
PHM
7 - Top Flange;
10 - Stirru
p
• ••• • •••• 3,265 - 3,390 3,060 - 3,390 220-229
PHXU 7 • ••• • •••• 4,350 - 5,910 4,350 - 5,910
220-221, 223-
225, 227-229
HLBH 7 • • • ••• 10,045 10,045
219, 223-225,
227-229
GHF 12 or 7 • •••2,740 - 13,000 2,740 - 13,000 233-234
HGU 7 • • • • ••• 14,705 14,705 232
KLEG
1
7 • •••11,980 11,980 235
KMEG
1
7 • •••12,635 12,635 235
KEG
1
1/4" - Top Flange;
7 - Stirru
p
• •••17,615 - 21,145 17,615 - 21,145 235
KEGQ
3 - Top Flange;
7 - U-Stra
p
• •••17,265 17,265 234
KHHB 7 • •••6,480 6,480 236
KGB 7 • • • •• 6,480 6,480 236
KHGB 7 • • • •• 6,480 6,480 236
KGLT
3 - Top Flange;
7 - Stirru
p
• •• • • • 10,555 10,555 237-238
KHGLT
3 - Top Flange;
7 - Stirru
p
• •••12,495 12,495 237-238
KGLS
3 - Top Flange;
7 - Stirru
p
• • • ••11,070 - 21,220 11,070 - 21,220 238-239
KHGLS
3 - Top Flange;
7 - Stirru
p
• •••21,750 - 23,195 21,750 - 23,195 238-239
KGLST
3 - Top Flange;
7 - Stirru
p
• • • ••13,695 - 26,890 13,695 - 26,890 238-239
KHGLST
3 - Top Flange;
7 - Stirru
p
• •••20,315 - 28,975 20,315 - 28,975 238-239
LGU 10 • • • • ••• 7,135 7,135 232
MGU 10 • • • •• 9,515 9,515 232
Slope / Skew LSSH 18 or 16 • •• • • ••••• 620 - 2,645 620 - 2,645 231
1
)
KEG, KLEG, KMEG han
g
ers assume allowable loads with to
p
flan
g
e.
2
)
When an I-Joist is used as a header
,
desi
g
ner must evaluate if a web stiffener or backer block is re
q
uired.
• Re
p
resents common a
pp
lications and
p
roduct confi
g
urations. Consult MiTek for additional a
pp
lications and/or o
p
tional
p
roduct confi
g
urations.
New products or updated product information are designated in blue font.
Top
Mount
Face
Mount
Glulam
Allowable Loads (Lbs.) Range
Beam/Joist/Rafter (rect shapes) Beam/Joist/Rafter (rect shapes) Truss (2x) Floor Truss 4x Nailer Glulam Rim Joist Wall Post I-Joist Truss (2x) MiTek USP Series Product Catalog Page Reference
Header Material
Supporting Member
Floor Truss 4x Glulam Stringer I-Joist
Supported Member
EWP Hanger Selection Guide