Use and Care Manual

228
MiTek
®
Product Catalog
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
EWP Hangers
EWP Hangers
Top Mount Hanger Charts
Fastener Schedule
5
Uplift
2
DF/SP
Ref. No. Ga W H D L TF Type Qty Type LVL PSL LSL SPF DF/SP
160%
HBPH5520 HB5.50/20 x 10 5-1/2 20 3-1/2 -- 3 6 16 16d 10 16d
6185 6185 6185 4910
--
6185
2705
PHXU5520 HWPH5.37 H=20 x 7 5-1/2 20 3-1/4 11-1/2 2-1/2 4 4 16d 6 10d 5910 5910 5910
4530
-- 5910 1120
HLBH5520 HGLTV5.37 H=20 x 7 5-9/16 20 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7680 -- 10045 1580
7 x 7-1/4 PHXU71725 -- x 7 7-1/8 7-1/4 3-1/4 13-1/8 2-1/2 4 4 16d 6 10d 5910 5910 5910
4525
-- 5910 1120
BPH71925 -- x 12 7-1/8 9-1/4 3 -- 2-3/8 4 6 16d 6 10d 3100 3100 3100 2370 -- 3100 1275
HBPH71925 -- x 10 7-1/8 9-1/4 3-1/2 -- 3 6 16 16d 10 16d
6185 6185 6185 4895
--
6185
2705
PHM35925-2 -- x 7/10 7-1/8 9-1/4 2-1/2 10 3 2 -- 16d 2 10d 3390 3390 3390 2580 -- 3390 --
PHXU71925 -- x 7 7-1/8 9-1/4 3-1/4 13-1/8 2-1/2 4 4 16d 6 10d 5910 5910 5910
4525
-- 5910 1120
HLBH71925 -- x 7 7-1/8 9-1/4 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7670 -- 10045 1580
BPH7195 -- x 12 7-1/8 9-1/2 3 -- 2-3/8 4 6 16d 6 10d 3100 3100 3100 2370 -- 3100 1275
HBPH7195 HB7.12/9.5 x 10 7-1/8 9-1/2 3-1/2 -- 3 6 16 16d 10 16d
6185 6185 6185 4895
--
6185
2705
PHM3595-2 -- x 7/10 7-1/8 9-1/2 2-1/2 10 3 2 -- 16d 2 10d 3390 3390 3390 2580 -- 3390 --
PHXU7195 HWP7.12 H=9.5 x 7 7-1/8 9-1/2 3-1/4 13-1/8 2-1/2 4 4 16d 6 10d 5910 5910 5910
4525
-- 5910 1120
HLBH7195 -- x 7 7-1/8 9-1/2 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7670 -- 10045 1580
BPH71112 -- x 12 7-1/8 11-1/4 3 -- 2-3/16 4 6 16d 6 10d 3075 3075 3075 2350 -- 3075 1275
HBPH71112 HB7.12/11.25 x 10 7-1/8 11-1/4 3-1/2 -- 3 6 16 16d 10 16d
6185 6185 6185 4895
--
6185
2705
PHXU71112 -- x 7 7-1/8 11-1/4 3-1/4 13-1/8 2-1/2 4 4 16d 6 10d 5910 5910 5910
4525
-- 5910 1120
HLBH71112 -- x 7 7-1/8 11-1/4 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7670 -- 10045 1580
BPH71118 -- x 12 7-1/8 11-7/8 3 -- 2-3/16 4 6 16d 6 10d 3075 3075 3075 2350 -- 3075 1275
HBPH71118 HB7.12/11.88 x 10 7-1/8 11-7/8 3-1/2 -- 3 6 16 16d 10 16d
6185 6185 6185 4895
--
6185
2705
PHM35118-2 -- x 7/10 7-1/8 11-7/8 2-1/2 10 3 2 -- 16d 2 10d 3390 3390 3390 2580 -- 3390 --
PHXU71118 HWP7.12 H=11.875 x 7 7-1/8 11-7/8 3-1/4 13-1/8 2-1/2 4 4 16d 6 10d 5910 5910 5910
4525
-- 5910 1120
HLBH71118 -- x 7 7-1/8 11-7/8 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7670 -- 10045 1580
BPH7114 -- x 12 7-1/8 14 3 -- 2-3/16 4 6 16d 6 10d 3075 3075 3075 2350 -- 3075 1275
HBPH7114 HB7.12/14 x 10 7-1/8 14 3-1/2 -- 3 6 16 16d 10 16d
6185 6185 6185 4895
--
6185
2705
PHM3514-2 -- x 7/10 7-1/8 14 2-1/2 10 3 2 -- 16d 2 10d 3390 3390 3390 2580 -- 3390 --
PHXU7114 HWP7.12 H=14 x 7 7-1/8 14 3-1/4 13-1/8 2-1/2 4 4 16d 6 10d 5910 5910 5910
4525
-- 5910 1120
HLBH7114 -- x 7 7-1/8 14 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7670 -- 10045 1580
BPH7116 -- x 12 7-1/8 16 3 -- 2-3/16 4 6 16d 6 10d 3075 3075 3075 2350 -- 3075 1275
HBPH7116 HB7.12/16 x 10 7-1/8 16 3-1/2 -- 3 6 16 16d 10 16d
6185 6185 6185 4895
--
6185
2705
PHM3516-2 -- x 7/10 7-1/8 16 2-1/2 10 3 2 -- 16d 2 10d 3390 3390 3390 2580 -- 3390 --
PHXU7116 HWP7.12 H=16 x 7 7-1/8 16 3-1/4 13-1/8 2-1/2 4 4 16d 6 10d 5910 5910 5910
4525
-- 5910 1120
HLBH7116 -- x 7 7-1/8 16 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7670 -- 10045 1580
1) When I-joist is used as a header, all header nails must be 10d (0.148") x 1-1/2.
2) Uplift loads have been increased 60% for wind or seismic loads; no further increase shall be permitted
3) Some listed loads may be increased for short-term loading. Refer to MiTek code evaluation reports for details.
4) When I-Joists with flanges less than 1-1/2" thick are used as headers, the reduction factor for 1-1/4" flange is 0.69 and 0.84 for 1-3/8" flange.
5) NAILS: 10d nails are 0.148" dia. x 3" long, NA16D-RS nails are 0.148" x 3-1/2" long, 16d nails are 0.162" dia. x 3-1/2" long.
Load tables address hanger/header/fastener limitations only. Joist limitations must be determined for each installation.
New products or updated product information are designated in blue font.
Joist Size
(in)
7 x 9-1/2
7 x 11-1/4
7 x 16
7 x 14
7 x 11-7/8
7 x 9-1/4
5-1/4 x 20
IBC,
FL,
LA
Header Joist Download 100%
MiTek USP
Stock No.
DF
I-Joist
4
Web
Stiff
Reqd
Allowable Loads Header Type (Lbs.)
1,3
Dimensions (in)
Code
Ref.
Top
Qty
Face
Qty
Continued on next page
H
W
L
TF
D