Use and Care Manual

237
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Glulam Beam Connectors
Glulam Beam Connectors
MiTek
®
Product Catalog
KGLT / KHGLT Glulam Beam Hangers
Typical KGLT5
installation
KGLT KHGLT
These heavy beam hangers are designed for use with glulam
and timber beams. The continuous top mount ange offers
high load capacity with minimal fastening.
KGLT – Medium capacity hanger
KHGLT – Heavy capacity hanger
Materials: See chart
Finish: Primer
Options: See Nailer Options chart below and
Specialty Options Chart on page 238
Codes: IBC, FL, LA
Installation:
• Use all specied fasteners. See Product Notes, page 18.
• Beam height dimension (H) must be specied
when ordering.
• See welded installation chart on page 325.
Floor
Ref. No. W H
3
L Type Qty Type 100%
3
115% 125%
KGLT3 -- 10 4 6 WS3 8 WS3 10555 10965 11055 1935
KHGLT3 HGLT3 12 6 12 WS3 6 WS3 12495 12495 12495 1935
KGLT4 -- 10 4 6 WS3 8 WS3 10555 10965 11055 1935
KHGLT4 HGLT4, HGLTV4 12 6 12 WS3 6 WS3 12495 12495 12495 1935
KGLT5 -- 10 4 6 WS3 8 WS3 10555 10965 11055 1935
KHGLT5 HGLT5, HGLTV5 12 6 12 WS3 6 WS3 12495 12495 12495 1935
5-5/16 KHGLT537 HGLTV5.37 3 7 5-3/8 specify 12 6 12 WS3 6 WS3 12495 12495 12495 1935
KGLT6 -- 12 4 6 WS3 8 WS3 10555 10965 11055 1935
KHGLT6 HGLT6, HGLTV6 12 6 12 WS3 6 WS3 12495 12495 12495 1935
KGLT7 -- 12 4 6 WS3 8 WS3 10555 10965 11055 1935
KHGLT7 HGLT7, HGLTV7 12 6 12 WS3 6 WS3 12495 12495 12495 1935
KGLT9 -- 14 4 6 WS3 8 WS3 10555 10965 11055 1935
KHGLT9 HGLT9 14 6 12 WS3 6 WS3 12495 12495 12495 1935
10-3/4 KHGLT11 -- 3 7 10-7/8 specify 16 6 12 WS3 6 WS3 12495 12495 12495 1935
1
)
U
p
lift loads have been increased 60% for wind or seismic loads; no further increase shall be
p
ermitted.
2
)
Allowable Loads are based on 625
p
si
p
er
p
endicular to
g
rain loadin
g
.
3
)
"S
p
ecif
y
" denotes the re
q
uired su
pp
orted beam hei
g
ht that must be s
p
ecified at time of orderin
g
, with 7-1/2" bein
g
the minimum.
4
)
MiTek's WS3 structural wood screws are 1/4" dia. x 3" lon
g
and are included with the han
g
ers.
New
p
roducts or u
p
dated
p
roduct information are desi
g
nated in blue font.
8-3/4
3-1/8
3-1/2
5-1/8
5-1/2
6-3/4
IBC,
FL,
LA
RoofHeader Joist
Code
Ref.
Top
Qty
Face
Qty
Uplift
1
160%
MiTek USP
Stock No.
Top
Flange
Steel Gauge
U-
Strap
Beam
Width
(in)
specify
specify
specify
specify
Allowable Loads (Lbs.)
2
Dimensions (in)
Fastener Schedule
4
specify
specify
3 7 3-1/4
3 7 3-5/8
3 7 8-7/8
3 7 5-1/4
3 7 5-5/8
3 7 6-7/8
L
H
5"
3-1/2"
2-1/2"
W
L
H
6"
2-1/2"
6-3/4"
W
Fastener Schedule
2,3
Type Qty Type
2x 4 -- WS15 8 WS15 5210 -- 4375 --
3x 4 2 WS15 8 WS15 6655 -- 5590 --
(2) 2x 4 4 WS3 8 WS3 6430 -- 5400 --
4X 4 6 WS3 8 WS3 6040
1925
5075
1615
1) Listed loads shall not be increased.
2) MiTek's WS15 structural wood screws are 1/4" dia. x 1-1/2" long and are
not
included with hangers.
3) MiTek's WS3 structural wood screws are 1/4" dia. x 3" long and are included with hangers.
4)
Values in the table apply to standard top mount hangers without slope, skew or any other specialty options.
New products or updated product information are designated in blue font.
DF/SP
Allowable Loads (Lbs.)
1,4
SPF
Allowable Loads (Lbs.)
1,4
Nailer Joist
KGLT
Nailer
Size
Uplift
160%
Uplift
160%
MiTek
Series
Top
Qty
Face
Qty
Download
100%
Download
100%
KGLT Nailer Options
– chart represents maximum allowable loads for hangers used on wood nailers. Reference page 203.
Continued on next page