Use and Care Manual
239
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Glulam Beam Connectors
Glulam Beam Connectors
MiTek
®
Product Catalog
KGLS / KGLST / KHGLS / KHGLST Glulam Saddle Hangers
Floor
Ref. No. W
H
4
D
L
SA
Qty
Type
Qty
Qty
Type
Qty
100%
115%
125%
KGLS35 GLS3-5 3-1/4 5 6 5-1/4 6 WS3 -- -- 6 WS3 -- -- 11070 11420 11650 2320 --
KGLST35 -- 3-1/4 6-1/2 10 5-1/4 6 WS3 2 3/4 6 WS3 3 3/4 13695 14045 14275 2320 15310
KGLS37 GLS3-7 3-1/4 5 6 6-7/8 6 WS3 -- -- 6 WS3 -- -- 11070 11420 11650 3715 --
KGLST37 -- 3-1/4 6-1/2 10 6-7/8 6 WS3 2 3/4 6 WS3 3 3/4 13695 14045 14275 3715 15310
KGLS39 GLS3-9 3-1/4 5 6 8-7/8 6 WS3 -- -- 6 WS3 -- -- 11070 11420 11650 3715 --
KGLST39 -- 3-1/4 6-1/2 10 8-7/8 6 WS3 2 3/4 6 WS3 3 3/4 13695 14045 14275 3715 15310
KGLS55 GLS5-5 5-1/4 5 9 5-1/4 6 WS3 -- -- 6 WS3 -- -- 15655 16065 16340 3715 --
KGLST55 -- 5-1/4 6-1/2 12 5-1/4 6 WS3 2 3/4 6 WS3 3 3/4 19960 20370 20645 3715 15310
KGLS57 GLS5-7 5-1/4 5 9 6-7/8 6 WS3 -- -- 6 WS3 -- -- 16670 17020 17250 3715 --
KGLST57 -- 5-1/4 6-1/2 12 6-7/8 6 WS3 2 3/4 6 WS3 3 3/4 20975 21325 21555 3715 15310
KHGLS5 HGLS5 5-1/4 6-1/2 12 specify 14 WS3 -- -- 8 WS3 -- -- 21750 22215 22525 4955 --
KHGLST5 -- 5-1/4 6 12 specify 14 WS3 2 3/4 8 WS3 3 3/4 20315 20780 21090 4955 15310
KGLS77 GLS7-7 6-7/8 5 12 6-7/8 6 WS3 -- -- 6 WS3 -- -- 21220 21570 21800 3715 --
KGLST77 -- 6-7/8 6-1/2 12 6-7/8 6 WS3 2 3/4 6 WS3 3 3/4 25420 25830 26105 3715 15310
KGLS79 GLS7-9 6-7/8 5 12 8-7/8 6 WS3 -- -- 6 WS3 -- -- 21220 21570 21800 3715 --
KGLST79 -- 6-7/8 6-1/2 12 8-7/8 6 WS3 2 3/4 6 WS3 3 3/4 26890 27240 27470 3715 15310
KHGLS7 HGLS7 6-7/8 6 12 specify 14 WS3 -- -- 8 WS3 -- -- 23195 24155 24795 4955 --
KHGLST7 -- 6-7/8 6-1/2 14 specify 14 WS3 2 3/4 8 WS3 3 3/4 25995 26955 27595 4955 15310
KHGLS9 HGLS9 8-7/8 6 12 specify 14 WS3 -- -- 8 WS3 -- -- 23195 24155 24795 4955 --
KHGLST9 -- 8-7/8 6-1/2 16 specify 14 WS3 2 3/4 8 WS3 3 3/4 28975 29755 30395 4955 15310
1) Allowable loads and fastener schedules apply to each side of the saddled hanger.
2) Minimum header height is 8-1/2" for the KGLS and KGLST; 10-1/2" for the KHGLS and KHGLST.
3) WS3 structural wood screws are 1/4" dia. x 3" long and are included with hangers.
4) Hangers with seismic straps may require a minimum joist depth. Consult MiTek for additional information.
specify
specify
specify
specify
Uplift
160%
IBC,
FL,
LA
Code
Ref.
Tension
160%
Allowable Loads (Lbs.)
1
Roof
F
C^
= 560 psi
8-3/4
Joist
3-1/8
5-1/8
6-3/4
Bolts
Supported
Glulam
Beam
Size (in)
MiTek USP
Stock No.
Dimensions (in)
4
Dia
(in)
Wood
Screws
1,3
Wood
Screws
1,3
Dia
(in)
Fastener Schedule
Bolts
Header
Option
Skewed
1,3
Sloped Seat
2
Sloped / Skewed
1,2
Sloped Top Flange
4
Top Flange Offset Saddle
Range
1˚ to 50˚ 1˚ to 45˚ See Sloped Seat and Skewed 0° to 30° May not be skewed 5" minimum saddle
1) Skewed hangers with skews greater than 15° may have all joist fasteners on outside flange.
2) Sloped or sloped / skewed hangers with slopes greater than 15° may have additional joist nails.
3) Skewed hangers typically require a bevel cut however, a square cut option may be available as a custom when requested.
4) Sloped top flanges with greater than 15° may have additional header nails.
50% of table load
for KGLS.
45% of table load
for KHGLS.
Add
SL,
slope required,
and up
(U)
or down
(D),
to product number.
Example:
KGLS35H115_SL30D
Add
SF,
angle required,
and right
(R)
or left
(L),
to product number.
Example:
KGLS35H115_SF30L
See Sloped Seat and Skewed.
Example:
KGLS35H115_SK45R_BV_SL30D
100% of table load
per side
Add
OS,
and
right
(R)
or left
(L),
to product number.
Example:
KGLS35H115_OSL
Add
SA,
and
saddle width required
to product number.
Example:
KGLS35H115_SA=5-1/2"
KGLS – 5,500-lb Max
KHGLS – may not
be sloped / skewed.
100% of table laod
Allowable
Loads
Ordering
KGLS – 6,500-lb Max
KHGLS – 7,980-lb Max
50% of uplift load
on skews greater than 15°.
Add
SK
, angle required,
right
(R)
or left
(L)
, and
square cut
(SQ)
or
bevel cut
(BV)
to product number.
Ex. KGLS35H115_SK45R_BV
KGLS – 6,500-lb Max
KHGLS – 9,165-lb Max
KGLS / KHGLS Specialty Options Chart
– refer to Specialty Options pages 320 and 322-323 for additional details