Use and Care Manual

ManualsBrandsMiTek ManualsBuilding Hardware1-1/2 in. x 1-1/2 in. x 1-1/4 in. G185 16-Gauge Framing Angle (1-Pack)

Concrete & Masonry

MiTek

Product Catalog

Anchoring Epoxy

CIA-GEL 7000-C Epoxy

CIA-GEL 7000-C Epoxy is an adhesive designed to attach anchor rods into concrete that is, or may become, cracked due to

cyclic loading from wind or earthquakes. It may also be used with fully grouted CMU construction. It is a low odor, solvent free,

non-shrink, non-sag adhesive. The two-component (resin and hardener) epoxy is supplied in equal volume cartridges, which are

combined in a 1:1 ratio when dispensed through the attached mixing nozzle. Either a manual or powered dispenser may be used.

The cartridges are sealed with a D-plug which opens easily and allows partially used cartridges to be saved for later use. The

epoxy has a two year shelf life when stored in unopened containers at temperatures between 50ºF and 77ºF.

Applications:

• Anchors threaded rod or deformed rebar into cracked or uncracked concrete.

• Anchoring All Thread Rod for holdowns into concrete for high seismic zones (ASCE Seismic Design C-F)

• Horizontal and overhead anchoring applications (requires special inspection)

Codes: IBC, FL, LA, NSF/ANSI Standard 61

MiTek Adhesive Anchor Design is powerful design software for CIA-GEL 7000-C that

provides optimized epoxy connection solutions for threaded anchors post-installed into

concrete. The software determines the required anchor rod steel grade, diameter and

effective embedment depth based on applied factored tension, shear and moment loads.

Get the free download at MiTek-US.com/software/Adhesive-Anchor-Design.

CIA-GEL 7000 Epoxy

CIA-GEL 7000 Epoxy is a structural adhesive specically designed to attach anchor rods into fully grouted concrete masonry

units (CMU) and is evaluated to ICC-ES AC58 for seismic, sustained load, elevated temperature and freeze-thaw suitability

conditions. It can also be used to install anchor bolts into uncracked concrete and reinforced brick. It is a low odor, solvent

free, non-shrink adhesive. The two-component (resin and hardener) epoxy is supplied in equal volume cartridges, which are

combined in a 1:1 ratio when dispensed through the attached mixing nozzle. Either a hand powered or air-powered dispenser

may be used. The cartridges are sealed with a D-plug which opens easily and allows partially used cartridges to be saved

for later use. The epoxy has a two year shelf life when stored in unopened containers at a temperature of 70ºF.

Applications:

• Anchors All-Thread rod and deformed rebar into fully grouted CMU

• Brick veneer anchoring

• Crack injection of medium to wide cracks

• Anchors rebar and threaded steel rod into uncracked concrete.

Codes: IBC, FL, LA

Available Sizes:

8.5 oz. – GEL7C-10

20.3 oz. – GEL7C-22

Available Sizes:

8.6 oz. – GEL7-10

21.2 oz. – GEL7-22

Cracked / Uncracked Concrete Bonding / Repair

CIA-GEL 7000-C

Masonry

CIA-GEL 7000

DOT & General Purpose

CIA-GEL 6000-GP

Uncracked Concrete

CIA-EA

IB-9

Product Offering Overview

Estimate how much epoxy your job needs. Quickly calculate the number of required cartridges using the

Epoxy Quantity Estimator. Run our web application on your desktop, smart phone or tablet. The Estimator works

with threaded rods or rebar. Enter the quantity, rod diameter and drilled hole depth, choose the epoxy type and

the required number of cartridges is displayed. MiTek-US.com/products/anchoring-solutions/anchoring-epoxy/