Use and Care Manual
51
Concrete & Masonry
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Concrete & Masonry
MiTek
®
Product Catalog
The AB anchor bolt provides an economical way to meet the prescriptive requirements of the 2018 IRC for
securing mudsill plates to a concrete or masonry foundation. The bolt is manufactured from ASTM 1554
steel and has a hot-dip galvanized nish. A nut (ASTM A 563) and washer (ASTM F 844) are included.
In some jurisdictions, a plate washer may be required. Check with your local Building Ofcial.
Materials: Bolt: ASTM F 1554, Nut: ASTM A 563, Washers: ASTM F 844
Finish: Hot-dip galvanized
Codes: See IRC R403.1.6, IBC 2308.3.1, 2308.3.1.1, 2308.3.1.2 for
minimum diameter and embedment into masonry or concrete.
Installation:
• Select appropriate AB Anchor Bolt.
• Use concrete with minimum compressive strength of 2,500 psi at 28 days.
• Nuts and washers are included.
• Anchor bolts intended for use to satisfy code prescribed anchoring of mudsill plates,
and shall be installed as dened in the code.
• Allowable loads shall be derived in accordance with the code.
• Plate washers may be required in some jurisdictions.
BP / LBP – Designed to meet code requirements for mudsill-to-foundation
HBPS / LBPS – Offers anchor bolt adjustment slots
Materials: See chart
Finish: BP / HBPS – none; LBP / LBPS – G-185 galvanizing
Options: See Chart for Corrosion Finish Options
Codes: See IRC R602.11.1, IBC 2308.3.1.1
for minimum plate size requirements
Installation:
• Bolt holes are sized 1⁄16" larger than Bolt Dia. shown in chart.
AB Anchor Bolts
AB126-HDG -- 1/2 6
AB128-HDG -- 1/2 8
AB1212-HDG -- 1/2 12
AB5812-HDG -- 5/8 12
MiTek USP
Stock No.
Bolt
Dia.
Code
Ref.
PC
Ref. No.
L
(in)
Corrosion
Finish
Typical AB128-HDG
installation
Typical Bearing Plate
installation
HBPS / LBPS
Slotted Bearing Plate
AB128-HDG
BP / HBPS / LBP / LBPS Bearing Plates
Ref. No.
WL
LBP12-TZ
LBP1/2,
LBP1/2Z
10 Ga 9/64 2 2 1/2 --
LBP58-TZ
LBP5/8,
LBP5/8Z
10 Ga 9/64 2 2 5/8 PC
LBPS12-TZ
LBPS1/2,
LBPS1/2Z
10 Ga 9/64 3 3 1/2
LBPS58-TZ
LBPS5/8,
LBPS5/8Z
10 Ga 9/64 3 3 5/8
HBPS12 BPS1/2-3 3 Ga 1/4 3 3 1/2
HBPS34 BPS3/4-3 3 Ga 1/4 3 3 3/4
HBPS58 BPS5/8-3 3 Ga 1/4 3 3 5/8
BP12 BP1/2 7 Ga 3/16 2 2 1/2
BP582 BP5/8-2 7 Ga 3/16 2 2 5/8
BP583
BP5/8,
BP5/8-3
3 Ga 1/4 3 3 5/8
BP343 BP3/4-3 3 Ga 1/4 3 3 3/4
PC
--
Code
Ref.
MiTek USP
Stock No.
Bolt
Dia.
Dimensions (in)
Plate
Thickness (T)
Corrosion
Finish
Corrosion Finish
Stainless Steel Gold Coat
HDG Triple Zinc
Corrosion Finish Stainless Steel Gold Coat HDG Triple Zinc
Corrosion
Finish
Stainless Steel
Gold Coat
HDG
Triple Zinc
Corrosion Finish
Stainless Steel Gold Coat
HDG Triple Zinc
Corrosion Finish Stainless Steel Gold Coat HDG Triple Zinc
Corrosion
Finish
Stainless Steel
Gold Coat
HDG
Triple Zinc
BP / LBP
Standard Bearing Plate
W
L
T
W
L
T
L