Use and Care Manual

113
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Angles & Straps
Angles & Straps
MiTek
®
Product Catalog
Corrosion Finish
Stainless Steel Gold Coat
HDG Triple Zinc
Corrosion Finish Stainless Steel Gold Coat HDG Triple Zinc
Corrosion
Finish
Stainless Steel
Gold Coat
HDG
Triple Zinc
ML angles are multi-purpose angles that install easily with MiTek’s
WS15 structural wood screws. The staggered fastener pattern
allows for back-to-back installations.
Materials: 12 gau ge
Finish: G-185 galvanizing
Codes: IBC, FL, LA
Installation:
• Use all specied fasteners. See Product Notes, page 18.
• MiTek WS15 structural wood screws (1/4" dia. x 1-1/2" long)
are not supplied with ML angles.
ML26-TZ
(ML24-TZ similar)
W
W
H
Ref. No. W H Type 100% 115% 125% 160% 100% 115% 125% 160%
ML24-TZ ML24Z 12 2 4 3 3 WS15
655 655 655 655 565 650 655 655
ML26-TZ ML26Z 12 2 6 4 4 WS15 920 1060
1090 1090
755 865
940 1090
1) Allowable loads have been increased 60% for wind and seismic loads; no further increase shall be permitted.
2) MiTek's WS15 structural wood screws are 1/4" dia. x 1-1/2" long and are not included with angles.
3) For exterior applications use MiTek's WS15-EXT structural wood screws with exterior coat finish.
New products or updated product information are designated in
blue font
.
IBC,
FL, LA
MiTek USP
Stock No.
Steel
Gauge
F1 F1
Corrosion
Finish
DF/SP
Allowable Loads (Lbs.)
1
S-P-F
Allowable Loads (Lbs.)
1
Dimensions
(in)
Code
Ref.
Header
Qty
Joist
Qty
Fastener
Schedule
2,3
F1
Typical ML26-TZ
installation
(ML24-TZ similar)
ML Angles
F1
TDL Concrete Angles
These angles secure wood posts to concrete
or wood oors in light-duty applications.
Materials: 12 gauge
Finish: G90 galvanizing
Options: See chart for Corrosion Finish Options
Installation:
• Use all specied fasteners. See Product Notes, page 18.
• The TDL10 can be embedded into concrete. Minimum
embedment depth is 4" to achieve allowable loads.
• Moisture barrier may be required.
TDL10
Typical TDL10
embedded interior
installation
Typical TDL5
interior installation
Corrosion Finish
Stainless Steel Gold Coat
HDG Triple Zinc
Corrosion Finish
Stainless Steel Gold Coat HDG Triple Zinc
Corrosion
Finish
Stainless Steel
Gold Coat
HDG
Triple Zinc
Anchor Bolts
Ref. No.
W H D Qty Qty Type Qty Dia. (in) Nails Bolts
TDL5 A24 12 2 5-3/16 2-1/4 1 1/2 4 16d 1 1/2
TDL10 A311 12 2 9-3/4 2-1/4 1 1/2 4 16d 1 1/2
1) Allowable loads are based on the use of either nails or bolts; nail and bolt values cannot be combined.
2) The bolt values are based on single shear with a minimum member thickness of 3-1/2".
3) Allowable loads have been increased in accordance with the code; no further increase shall be permitted.
4) Designer must specify anchor bolt type, length, and embedment.
5)
NAILS:
16d nails are 0.162" dia. x 3-1/2" long.
955 1105
Bolts
Strap
--
Corrosion
Finish
Dimensions (in)
Nails
Code
Ref.
Fastener Schedule
4,5
Uplift 160%
Steel
Gauge
DF/SP
Allowable Loads (Lbs.)
1,2,3
Dia.
(in)
MiTek USP
Stock No.
4" min.
embedment
H
D
W