Use and Care Manual

134
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Angles & Straps
Angles & Straps
MiTek
®
Product Catalog
Ref. No. W L O D1 D2 Qty Type 160%
22 16d 2620
4 1/2 2015
KHSA1 -- 3 3 30 9 10 -- 2 3/4 2435
KHSA2 -- 3 3 38-1/2 9 10 4-1/2 4 3/4 4810
KHSA3 -- 3 3 47 9 10 4-1/2 6 3/4 7005
KHSA4 -- 3 3 56 9 10 4-1/2 8 3/4 8920
KHSA5 -- 3 3-1/2 64-1/2 9 10 4-1/2 10 3/4 10785
1) Allowable loads are based on the use of either nails or bolts; nail and bolt values cannot be combined.
2) Bolt values assume wood member thickness of 3-1/2" with bolts in single shear.
3) Bolts shall be loaded parallel to grain.
4)
NAILS:
16d nails are 0.162" dia. x 3-1/2" long.
Fastener
Schedule
3,4
Code
Ref.
IBC,
FL,
LA
92-1/16 37-7/8 6-11/16 4-1/2
Dimensions (in)
DF/SP
Allowable Tension
Loads (Lbs.)
1,2
MiTek USP
Stock No.
Steel
Gauge
KSA36 SA36 12
KSA36 KHSA5
L
O
W
L
O
W
Typical KSA installation
Typical KHSA4
installation
Typical KSA installation
KSA – 12 gauge seismic horizontal tension tie
KHSA – 3 gauge. Designed for installation with bolts only
Materials: See chart
Finish: KSA – G90 galvanizing;
KHSA – Primer
Codes: IBC, FL, LA
Installation:
• Use all specied fasteners. See Product Notes, page 18.
• KSA36 can be eld adjusted for smaller beam widths.
KHSA / KSA Connector Straps
O
15° max
Hanger
Connector strap
D1
D2
Allowable loads
0
18° max