Use and Care Manual

Fire Wall Hangers
197
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Fire Wall Hangers
MiTek
®
Product Catalog
FWHBP Fire Wall Hangers for Beams and Purlins
W1
W2
3
H
A
100%
115%
125%
3-1/2 x 11-7/8 FWHBP35118 11-7/8
3-1/2 x 14 FWHBP3514 13-15/16
3-1/2 x 16 FWHBP3516 15-15/16
3-1/2 x 18 FWHBP3518 17-15/16
3-1/2 x 20 FWHBP3520 19-15/16
3-1/2 x 22 FWHBP3522 21-15/16
3-1/2 x 24 FWHBP3524 23-15/16
5-1/4 x 11-7/8 FWHBP52118 11-7/8
5-1/4 x 14 FWHBP5214 13-15/16
5-1/4 x 16 FWHBP5216 15-15/16
5-1/4 x 18 FWHBP5218 17-15/16
5-1/4 x 20 FWHBP5220 19-15/16
5-1/4 x 22 FWHBP5222 21-15/16
5-1/4 x 24 FWHBP5224 23-15/16
7 x 11-7/8 FWHBP71118 11-7/8
7 x 14 FWHBP7114 13-15/16
7 x 16 FWHBP7116 15-15/16
7 x 18 FWHBP7118 17-15/16
7 x 20 FWHBP7120 19-15/16
7 x 22 FWHBP7122 21-15/16
7 x 24 FWHBP7124 23-15/16
1) Download allowable load is for a 2-Ply Top Plate with stud pack (or post) below without wall and floor sheathing attached.
2) Uplift loads have been increased 60% for wind or seismic loads. No further increase shall be permitted.
3) "Specify" denotes required stud pack/post width must be specified when ordering. Minimum 3" for a 2-ply 2x stud pack.
4)
NAILS:
10d nails are 0.148" dia. x 3" long.
Steel
Gauge
12
12
Dimensions (in)
--
7-1/8
7-15/16
9-11/1612
Joist
Size
Uplift
160%
2
--
--
Ref.
No.
MiTek USP
Stock No.
8015 8015 30256 4 16 18 10d 8015
6 4 16 18
Code
Ref.
--
5695 5695 3025
7355 7550 3025
7-1/8
Specify
5-3/8 Specify
3-9/16
Specify 18
10d
DF/SP Allowable Loads (Lbs.)
Download
2-Ply 2x Wall Top Plate
1
Fastener Schedule
4
Joist
Qty Type
Header
Top
Qty
Header
Face
Qty
Header
Stud
Qty
569510d6 4 16
7055
Option
Skewed
1
Range
1˚ to 70˚
Allowable Loads
70% of table load
1) Skewed hangers with skews greater than 15° may have all
joist nailing on outside flange.
Ordering
Add
SK, angle required, right (R) or left (L),
and square cut (SQ) to product number.
Ex. FWHBP3514_SK45L_SQ
Specialty Options Chart – Refer to Specialty Options
pages 320 and 322 for additional details.