Use and Care Manual

ManualsBrandsMiTek ManualsBuilding Hardware2 x 6 G185 18-Gauge Slant Nail Face Mount Joist Hanger (48-Pack)

231

232

233

234

235

236

237

238

239

240

226

MiTek

Product Catalog

EWP Hangers

Top Mount Hanger Charts

Fastener Schedule

Uplift

DF/SP

Ref. No. Ga W H D L TF Type Qty Type LVL PSL LSL SPF DF/SP

160%

THO20160-2 BA4.12/16 x 12 4-3/16 16 3 -- 1-15/16 4 6 16d 6 10d 3640 3640 3640 2800 2630 3640 1145

PHM4216 WP4.12 H=16 x 7/10 4-3/16 16 2-1/2 7 3 2 -- 16d 2 10d 3265 3265 3265 2480 -- 3265 --

THO23950-2

MIT4.28/9.5,

BA4.28/9.5

x 12 4-3/4 9-1/2 3 -- 2 4 6 16d 6 10d 3640 3640 3640 2790 2630 3640 1145

PHM2395-2 WP4.28X H=9.5 x 7/10 4-3/4 9-1/2 2-1/2 7 3 2 -- 16d 2 10d 3265 3265 3265 2480 -- 3265 --

THO23118-2

MIT4.28/11.88,

BA4.28/11.88

x 12 4-3/4 11-7/8 3 -- 2-1/8 4 6 16d 6 10d 3640 3640 3640 2795 2630 3640 1145

PHM23118-2 WP4.28X H=11.875 x 7/10 4-3/4 11-7/8 2-1/2 7 3 2 -- 16d 2 10d 3265 3265 3265 2480 -- 3265 --

4-1/2 - 4-5/8 x 14 THO23140-2

MIT4.28/14,

BA4.28/14

x 12 4-3/4 14 3 -- 2-1/8 4 8 16d 6 10d 4420 4420 4420 3390 2630 4420 1145

THO23160-2 BA4.28/16 x 12 4-3/4 16 3 -- 2-1/8 4 8 16d 6 10d 4420 4420 4420 3390 2630 4420 1145

PHM2316-2 WP4.28X H=16 x 7/10 4-3/4 16 2-1/2 7 3 2 -- 16d 2 10d 3265 3265 3265 2480 -- 3265 --

THO23180-2 BA4.75/18 x 12 4-3/4 18 3 -- 2-1/8 4 10 16d 6 10d 5660 5760 5760 3720 2630 5000 1145

PHM2318-2 WP4.75 H=18 x 7/10 4-3/4 18 2-1/2 7 3 2 -- 16d 2 10d 3265 3265 3265 2480 -- 3265 --

THO23200-2 BA4.75/20 x 12 4-3/4 20 3 -- 2-1/8 4 10 16d 6 10d 5660 5760 5760 3720 2630 5000 1145

PHM2320-2 WP4.75 H=20 x 7/10 4-3/4 20 2-1/2 7 3 2 -- 16d 2 10d 3265 3265 3265 2480 -- 3265 --

5 x 9-1/4 THO25925-2 BA5.12/9.25 x 12 5-1/8 9-1/4 3 -- 2-11/16 4 6 16d 6 10d 3640 3640 3640 2790 2630 3640 1145

THO25950-2 MIT39.5-2 x 12 5-1/8 9-1/2 3 -- 2-1/8 4 6 16d 6 10d 3640 3640 3640 2790 2630 3640 1145

PHM2595-2 WP5.12 H=9.5 x 7/10 5-1/8 9-1/2 2-1/2 7 3 2 -- 16d 2 10d 3265 3265 3265 2480 -- 3265 --

5 x 11-1/4 THO25112-2 -- x 12 5-1/8 11-1/4 3 -- 2-1/8 4 6 16d 6 10d 3640 3640 3640 2790 2630 3640 1145

5 x 11-7/8 THO25118-2

MIT311.88-2,

BA5.12/11.88,

WP5.12 H=11.875

x 12 5-1/8 11-7/8 3 -- 2-1/8 4 6 16d 6 10d 3640 3640 3640 2790 2630 3640 1145

THO25140-2

MIT314-2,

BA5.12/14

x 12 5-1/8 14 3 -- 2-1/8 4 8 16d 6 10d 4420 4420 4420 3390 2630 4420 1145

PHM2514-2 WP5.12 H=14 x 7/10 5-1/8 14 2-1/2 7 3 2 -- 16d 2 10d 3265 3265 3265 2480 -- 3265 --

THO25160-2

MIT5.12/16,

BA5.12/16

x 12 5-1/8 16 3 -- 2-1/8 4 8 16d 6 10d 4420 4420 4420 3390 2630 4420 1145

HBPH5116 HB5.12/16 x 10 5-1/8 16 3-1/2 -- 3 6 16 16d 10 16d

6185 6185 6185 4910

6185

2705

PHM2516-2 WP5.12 H=16 x 7/10 5-1/8 16 2-1/2 7 3 2 -- 16d 2 10d 3265 3265 3265 2480 -- 3265 --

THO25180-2 BA5.12/18 x 12 5-1/8 18 3 -- 2-1/8 4 10 16d 6 10d 5660 5760 5760 3720 2630 5000 1145

HBPH5118 HB5.12/18 x 10 5-1/8 18 3-1/2 -- 3 6 16 16d 10 16d

6185 6185 6185 4910

6185

2705

PHM2518-2 WP5.12 H=18 x 7/10 5-1/8 18 2-1/2 7 3 2 -- 16d 2 10d 3265 3265 3265 2480 -- 3265 --

THO25200-2 BA5.12/20 x 12 5-1/8 20 3 -- 2-1/8 4 10 16d 6 10d 5660 5760 5760 3720 2630 5000 1145

HBPH5120 HB5.12/20 x 10 5-1/8 20 3-1/2 -- 3 6 16 16d 10 16d

6185 6185 6185 4910

6185

2705

PHM2520-2 WP5.12 H=20 x 7/10 5-1/8 20 2-1/2 7 3 2 -- 16d 2 10d 3265 3265 3265 2480 -- 3265 --

HBPH5122 HB5.12/22 x 10 5-1/8 22 3-1/2 -- 3 6 16 16d 10 16d

6185 6185 6185 4910

6185

2705

PHM2522-2 WP5.12 H=22 x 7/10 5-1/8 22 2-1/2 7 3 2 -- 16d 2 10d 3265 3265 3265 2480 -- 3265 --

HBPH5124 HB5.12/24 x 10 5-1/8 24 3-1/2 -- 3 6 16 16d 10 16d

6185 6185 6185 4910

6185

2705

PHM2524-2 WP5.12X H=24 x 7/10 5-1/8 24 2-1/2 7 3 2 -- 16d 2 10d 3265 3265 3265 2480 -- 3265 --

HBPH5126 HB5.12/26 x 10 5-1/8 26 3-1/2 -- 3 6 16 16d 10 16d

6185 6185 6185 4910

6185

2705

PHM2526-2 WP5.12 H=26 x 7/10 5-1/8 26 2-1/2 7 3 2 -- 16d 2 10d 3265 3265 3265 2480 -- 3265 --

5 x 28 HBPH5128 HB5.12/28 x 10 5-1/8 28 3-1/2 -- 3 6 16 16d 10 16d

6185 6185 6185 4910

6185

2705

5 x 30 HBPH5130 -- x 10 5-1/8 30 3-1/2 -- 3 6 16 16d 10 16d

6185 6185 6185 4910

6185

2705

BPH55725 -- x 10 5-9/16 7-1/4 2-1/4 -- 2-1/2 4 6 16d 6 10d 3065 3065 3065 2340 -- 3065 850 --

HBPH55725 -- x 10 5-1/2 7-1/4 3-1/2 -- 3 6 16 16d 10 16d 6185 6185 6185 4910 -- 6185 2705

IBC,

FL, LA

1) When I-joist is used as a header, all header nails must be 10d (0.148") x 1-1/2.

2) Uplift loads have been increased 60% for wind or seismic loads; no further increase shall be permitted

3) Some listed loads may be increased for short-term loading. Refer to MiTek code evaluation reports for details.

4) When I-Joists with flanges less than 1-1/2" thick are used as headers, the reduction factor for 1-1/4" flange is 0.69 and 0.84 for 1-3/8" flange.

5) NAILS: 10d nails are 0.148" dia. x 3" long, NA16D-RS nails are 0.148" x 3-1/2" long, 16d nails are 0.162" dia. x 3-1/2" long.

Load tables address hanger/header/fastener limitations only. Joist limitations must be determined for each installation.

New products or updated product information are designated in blue font.

MiTek USP

Stock No.

Joist Size

(in)

5 x 9-1/2

5 x 14

5 x 16

5 x 22

5 x 24

5 x 26

5-1/4 x 7-1/4

IBC,

FL,

5 x 20

5 x 18

4-1/2 - 4-5/8 x 20

4-1/2 - 4-5/8 x 16

4-1/2 - 4-5/8 x 18

4 - 4-3/16 x 16

4-1/2 - 4-5/8 x

9-1/2

4-1/2 - 4-5/8 x

11-7/8

I-Joist

Code

Ref.

Web

Stiff

Reqd

Allowable Loads Header Type (Lbs.)

1,3

Dimensions (in)

Header Joist Download 100%

Top

Qty

Face

Qty

Continued on next page