Use and Care Manual

EWP Hangers
229
MiTek
®
Product Catalog
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
EWP Hangers
Top Mount Hanger Charts
Fastener Schedule
5
Uplift
2
DF/SP
Ref. No. Ga W H D L TF Type Qty Type LVL PSL LSL SPF DF/SP
160%
BPH7118 -- x 12 7-1/8 18 3 -- 2-3/16 4 6 16d 6 10d 3075 3075 3075 2350
--
3075 1275
HBPH7118 HB7.12/18 x 10 7-1/8 18 3-1/2 -- 3 6 16 16d 10 16d
6185 6185 6185 4895
--
6185
2705
PHM3518-2 -- x 7/10 7-1/8 18 2-1/2 10 3 2 -- 16d 2 10d 3390 3390 3390 2580
--
3390 --
PHXU7118
HWP7.12 H=18,
HWPH7.12 H=18
x 7 7-1/8 18 3-1/4 13-1/8 2-1/2 4 4 16d 6 10d 5910 5910 5910
4525 --
5910 1120
HLBH7118 -- x 7 7-1/8 18 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7670
--
10045 1580
BPH7120 -- x 12 7-1/8 20 3 -- 2-3/16 4 6 16d 6 10d 3075 3075 3075 2350
--
3075 1275
HBPH7120 HB7.12/20 x 10 7-1/8 20 3-1/2 -- 3 6 16 16d 10 16d
6185 6185 6185 4895
--
6185
2705
PHM3520-2 -- x 7/10 7-1/8 20 2-1/2 10 3 2 -- 16d 2 10d 3390 3390 3390 2580
--
3390 --
PHXU7120
HWP7.12 H=20,
HWPH7.12 H=20
x 7 7-1/8 20 3-1/4 13-1/8 2-1/2 4 4 16d 6 10d 5910 5910 5910
4525 --
5910 1120
HLBH7120 -- x 7 7-1/8 20 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7670
--
10045 1580
BPH7122 -- x 12 7-1/8 22 3 -- 2-3/16 4 6 16d 6 10d 3075 3075 3075 2350
--
3075 1275
HBPH7122 HB7.12/22 x 10 7-1/8 22 3-1/2 -- 3 6 16 16d 10 16d
6185 6185 6185 4895
--
6185
2705
PHXU7122
HWP7.12 H=22,
HWPH7.12 H=22
x 7 7-1/8 22 3-1/4 13-1/8 2-1/2 4 4 16d 6 10d 5910 5910 5910
4525 --
5910 1120
HLBH7122 HGLTV7.12/22 x 7 7-1/8 22 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7670
--
10045 1580
BPH7124 -- x 12 7-1/8 24 3 -- 2-3/16 4 6 16d 6 10d 3075 3075 3075 2350
--
3075 1275
HBPH7124 HB7.12/24 x 10 7-1/8 24 3-1/2 -- 3 6 16 16d 10 16d
6185 6185 6185 4895
--
6185
2705
PHXU7124
HWP7.12 H=24,
HWPH7.12 H=24
x 7 7-1/8 24 3-1/4 13-1/8 2-1/2 4 4 16d 6 10d 5910 5910 5910
4525 --
5910 1120
HLBH7124 HGLTV7.12/24 x 7 7-1/8 24 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7670
--
10045 1580
HBPH7126 HB7.12/26 x 10 7-1/8 26 3-1/2 -- 3 6 16 16d 10 16d
6185 6185 6185 4895
--
6185
2705
PHXU7126
HWP7.12 H=26,
HWPH7.12 H=26
x 7 7-1/8 26 3-1/4 13-1/8 2-1/2 4 4 16d 6 10d 5910 5910 5910
4525 --
5910 1120
HLBH7126 HGLTV426-2 x 7 7-1/8 26 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7670
--
10045 1580
HBPH7128 HB7.12/28 x 10 7-1/8 28 3-1/2 -- 3 6 16 16d 10 16d
6185 6185 6185 4895
--
6185
2705
PHXU7128
HWP7.12 H=28,
HWPH7.12 H=28
x 7 7-1/8 28 3-1/4 13-1/8 2-1/2 4 4 16d 6 10d 5910 5910 5910
4525 --
5910 1120
HLBH7128 HGLTV428-2 x 7 7-1/8 28 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7670
--
10045 1580
PHXU7130 HWPH7.12 H=30 x 7 7-1/8 30 3-1/4 13-1/8 2-1/2 4 4 16d 6 10d 5910 5910 5910
4525 --
5910 1120
HLBH7130 HGLTV430-2 x 7 7-1/8 30 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7670
--
10045 1580
PHXU7132 -- x 7 7-1/8 32 3-1/4 13-1/8 2-1/2 4 4 16d 6 10d 5910 5910 5910
4525 --
5910 1120
HLBH7132 -- x 7 7-1/8 32 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7670
--
10045 1580
1) When I-joist is used as a header, all header nails must be 10d (0.148") x 1-1/2.
2) Uplift loads have been increased 60% for wind or seismic loads; no further increase shall be permitted
3) Some listed loads may be increased for short-term loading. Refer to MiTek code evaluation reports for details.
4) When I-Joists with flanges less than 1-1/2" thick are used as headers, the reduction factor for 1-1/4" flange is 0.69 and 0.84 for 1-3/8" flange.
5) NAILS: 10d nails are 0.148" dia. x 3" long, NA16D-RS nails are 0.148" x 3-1/2" long, 16d nails are 0.162" dia. x 3-1/2" long.
Load tables address hanger/header/fastener limitations only. Joist limitations must be determined for each installation.
New products or updated product information are designated in blue font.
IBC,
FL,
LA
7 x 18
7 x 20
7 x 22
7 x 32
7 x 24
7 x 26
7 x 28
7 x 30
Joist Size
(in)
MiTek USP
Stock No.
DF
I-Joist
4
Code
Ref.
Web
Stiff
Reqd
Dimensions (in)
Allowable Loads Header Type (Lbs.)
1,3
Header Joist Download 100%
Top
Qty
Face
Qty
H
W
L
TF
D