Use and Care Manual

241
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Glulam Beam Connectors
Glulam Beam Connectors
MiTek
®
Product Catalog
Typical KHCST
installation
Ref. No. W PD PT 410 psi 560 psi 410 psi 560 psi
55 HCA5-5 7 5-1/4 5 3/4 17-1/2 10505 14350 14 10505 14350
56 HCA5-6 7 5-1/4 6 3/4 22-3/4 12610 17220 17-1/2 12610 17220
57 HCA5-7 7 5-1/4 7 3/4 28-3/4 14710 20090 21-3/4 14710 20090
59 HCA5-9 7 5-1/4 9 3/4 43-1/2 18910 25830 32 18910 25830
75 HCA7-5 7 6-7/8 5 1 20-3/4 13840 18900 16 13840 18900
76 HCA7-6 7 6-7/8 6 1 27-1/2 16605 22680 20-3/4 16605 22680
77 HCA7-7 7 6-7/8 7 1 35-1/2 19375 26460 26-1/4 19375 26460
79 HCA7-9 7 6-7/8 9 1 55 24910 34020 40 24910 34020
95 HCA9-5 7 8-7/8 5 1-1/4 24-3/4 17940 24500 18-3/4 17940 24500
96 HCA9-6 7 8-7/8 6 1-1/4 33-1/2 21525 29400 24-3/4 21525 29400
97 HCA9-7 7 8-7/8 7 1-1/4 43-3/4 25115 34300 32 25115 34300
99 HCA9-9 7 8-7/8 9 1-1/4 69-1/4 32290 44100 49-3/4 32290 44100
115 HCA11-5 3 10-7/8 5 1-1/2 27-1/4 22040 30100 20-1/4 22040 30100
116 HCA11-6 3 10-7/8 6 1-1/2 37-1/4 26445 36120 27 26445 36120
117 HCA11-7 3 10-7/8 7 1-1/2 49-1/4 30855 42140 35-1/4 30855 42140
119 HCA11-9 3 10-7/8 9 1-1/2 78-1/4 39670 54180 55-1/4 39670 54180
1) Allowable download shall not be further increased for duration.
2) The minimum height is for loads shown. For heights less than the minimum shown reduce the allowable loads in direct proportion.
3) All bolts are 3/4", and shall meet or exceed the specifications of ASTM A 307.
Dimensions (in)
(2) Rotation Bolts
3
Per Beam (3) Rotation Bolts
3
Per Beam
DF/SP
Allowable Download (Lbs.)
1
DF/SP
Allowable Loads (Lbs.)
1
H
2
(in)
H
2
(in)
Code
Ref.
IBC,
FL,
LA
5-1/8
6-3/4
8-3/4
10-3/4
Steel
Gauge
MiTek
Stock No.
Suffix
Beam
Width
(in)
Allowable Download Chart
KHC Hinge Connectors
KHCST
Ref. No. W L Qty F1 160%
KHCST2 --
KHCSTR2 HCSTR2
KHCST3 --
KHCSTR3 HCSTR3
KHCST4 --
KHCSTR4 HCSTR4
1) Allowable loads are for straps used in pairs, and are increased 60% for wind
or seismic loads; no further increase shall be permitted.
2) Loads are based on a 5-1/8" width Douglas-Fir-Larch beam.
3) Seismic straps shall be used with the KHC hinge connectors.
Dimensions (in)
Code
Ref.
MiTek USP
Stock No.
3
Steel
Gauge
IBC,
FL,
LA
7
7
3-1/2
3-1/2
25-5/8
31-5/8
3 3-1/2 37-5/8
6 3/4
20145
4 3/4
DF/SP
Allowable
Loads (Lbs.)
1,2
Bolt
Schedule
8 3/4
10075
14685
Dia
(in)
KHCST / KHCSTR Seismic Straps
Seismic straps can be installed during construction or added as a retrot item.
Materials: See chart
Finish: Primer
Codes: IBC, FL, LA
Installation:
• Use all specied fasteners. See Product Notes, page 18.
KHC
Hinge connector
F1
L
W