Use and Care Manual

305
Deck & Fences
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Deck & Fences
MiTek
®
Product Catalog
PCP Plastic Post Caps
SMP
PCP66
BD
SFP30
Typical PCP44
installation
Typical BD
installation
Typical SMP
installation
Typical SFP30
installation
These seamless caps keep water off post tops, protecting wood from moisture
damage. The PCP’s plastic construction is corrosion-proof and paintable. Not
available in rough or full lumber sizes.
Materials: Hi-impact plastic
Finish: Gray color
Installation:
• Fasten cap to post top with (1) 8d HDG or 10d HDG nail.
SFP / SMP Fence Post Connectors
BD Bolt Down
Take the work out of fence post installation and repair with the Speedpost,
SFP30, and Speedmender, SMP. The Speedpost is used to install 4x4 fence
posts without digging post holes or pouring concrete. The Speedmender
plates act as reinforcement brackets for rotted or damaged 4x4 fence posts.
SFP30 – For 6' nominally-sized 4x4 fence posts.
SMP – For nominally-sized 4x4 posts.
Materials: 13 gauge
Finish: Paint
Patent: U.S. Patent No. 7,152,841
Installation:
• Step-by-step installation instructions are labeled onto each product.
Anchors 4x4 post to wood or concrete surfaces.
Materials: 13 gauge
Finish: Paint
Patents: U.S. Patent No. 7,152,841
Installation:
• Use all specied fasteners. See Product Notes, page 18.
• Not rated for overturning resistance. Not recommended
for unrestrained posts.
Ref. No. W Color
4 x 4 PCP44 DPPC4BK 3-5/8 Gray
6 x 6 PCP66 DPPC6BK 5-5/8 Gray
1) Not available in rough or full lumber sizes.
Post /
Column
Size
1
MiTek USP
Stock No.
Code
Ref.
--
Dimension
(in)
Ref. No.
Qty
Type
4 x 4 SFP30 FPBS44 13 3 1/4" HDG Lag Bolt
4 x 4
SMP
1
FPBM44 13 20 10d HDG
1) Fastener schedule is per pair of SMPs.
2)
NAILS:
10d nails are 0.148" dia. x 3" long.
Post
Size
MiTek USP
Stock No.
Code
Ref.
--
Steel
Gauge
Fastener Schedule
2
Post Size Ref. No. Qty Type (in)
4 x 4 BD FPBB44 13 3 1/4 x 1-1/2 HDG Lag Bolt --
MiTek USP
Stock No.
Steel
Gauge
Fastener Schedule
Code
Ref.
W
W
30"
28-1/16"
5-5/8"
3-5/8"
5-5/8"
3-5/8"