Use and Care Manual

349
MH Connectors
Manufactured Housing Connectors
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
MiTek
®
Product Catalog
Easy-to-install plates protect plumbing and power/communication wiring
from nail or screw penetration.
ICPL58 – Installs with nails
KNS1 / PL4 – Prongs allow for quick installation
Materials: 16 gauge
Finish: ICPL516-TZ – G-185 galvanizing; All other – G90 galvanizing.
Options: See chart for Corrosion Finish Options
Installation:
• Use all specied fasteners.
• 16 gauge steel conforms to protection shield plate requirements of the
National Electrical Code and International Plumbing Code.
Typical PL4
installation
Ref. No. W H Qty Type F1 160% F1 160%
ICPL58 -- 16 8-1/16 5 -- 4 8d or prongs -- --
PL4 NS2 16 2 5 -- -- prongs -- --
KNS1 NS1 16 1-1/2 3 -- -- prongs -- --
Sill Plate 12 16d HDG + prongs 1355 1160
Double Top Plate 16 16d HDG + prongs 1805 1550
1) Allowable loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.
2)
NAILS:
8d nails are 0.131" dia. x 2-1/2" long, 16d nails are 0.162" dia. x 3-1/2" long.
Code
Ref.
DF/SP
Allowable
Loads (Lbs.)
1
S-P-F
Allowable
Loads (Lbs.)
1
PC
Corrosion
Finish
16-1/4
Installation
Type
Dimensions (in)
Fastener Schedule
2
5
MiTek USP
Stock No.
Steel
Gauge
ICPL516-TZ PSPN516Z 16
ICPL516-TZ
Typical ICPL516-TZ
installation
W
H
Plumbing / Electrical Protection Plates
ICPL58
PL4
Typical ICPL58
installation
KNS1
Typical KNS1 / PL4
installation
W
H
W
H
W
H
Corrosion Finish
Stainless Steel Gold Coat
HDG Triple Zinc
Corrosion Finish
Stainless Steel Gold Coat HDG Triple Zinc
Corrosion
Finish
Stainless Steel
Gold Coat
HDG
Triple Zinc