Use and Care Manual

45
Concrete & Masonry
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Concrete & Masonry
MiTek
®
Product Catalog
Ref. No. Ref. No.
PFM1411000 THDB25178H -- -- 1/4 x 1-1/4
PFM1411020 THD25134H -- -- 1/4 x 1-3/4
PFM1411060 THD25214H -- -- 1/4 x 2-1/4
PFM1411100 THDB25300H -- -- 1/4 x 3
PFM1411160 THD37134H -- -- 3/8 x 1-3/4
PFM1411220 THD37212H -- -- 3/8 x 2-1/2
PFM1411240 THD37300H -- -- 3/8 x 3
PFM1411280 THD37400H PFM1461280 THD37400HMG 3/8 x 4
PFM1411300 THD37500H PFM1461300 THD37500HMG 3/8 x 5
PFM1411320 THD37600H PFM1461320 THD37600HMG 3/8 x 6
PFM1411340 -- -- -- 1/2 x 2
PFM1411360 -- -- -- 1/2 x 2-1/2
PFM1411380 THD50300H -- -- 1/2 x 3
PFM1411420 THD50400H PFM1461420 THD50400HMG 1/2 x 4
PFM1411460 THD50500H PFM1461460 THD50500HMG 1/2 x 5
PFM1411480 THD50600H PFM1461480 THD50600HMG 1/2 x 6
PFM1411520 THD50800H PFM1461520 THD50800HMG 1/2 x 8
PFM1411540 -- -- -- 5/8 x 3
PFM1411580 THD62400H -- -- 5/8 x 4
PFM1411600 THD62500H PFM1461600 THD62500HMG 5/8 x 5
PFM1411640 THD62600H PFM1461640 THD62600HMG 5/8 x 6
PFM1411680 THD62800H PFM1461680 THD62800HMG 5/8 x 8
PFM1411700 -- -- -- 3/4 x 3
PFM1411720
THD75400H
--
--
3/4 x 4
PFM1411760
THD75500H
--
--
3/4 x 5
PFM1411800 THD75600H PFM1461800 THD75600HMG 3/4 x 6
PFM1411840 THD75812H -- -- 3/4 x 8
-- -- PFM1461850 THD75812HMG 3/4 x 8-1/2
PFM1411880 THD75100H -- -- 3/4 x 10
1) The anchor size includes the diameter and length of the anchor measured from under the head.
Zinc Plated Mechanically Galvanized
Anchor
Size
(in)
1
Hole
Size
(in)
MiTek USP
Stock No.
MiTek USP
Stock No.
Code
Ref.
IBC,
FL,
LA
3/8 9/16
1/2 3/4
5/8 15/16
1/4 7/16
Socket
Size (in)
3/4 1-1/8
PFM Concrete Screw Anchors
Screw-Bolt+ anchors are a one-piece, heavy duty screw anchor
with a finished hex head. The patented thread design, designed for
use with standard ANSI drill bits, reduces installation torque and
enhances productivity. The steel threads along the anchor body tap
into the hole during installation to provide keyed engagement and
allow for reduced edge and spacing distances.
Finish: Zinc Plated or Mechanically Galvanized
Codes: IBC, FL, LA
Screw-Bolt
TM
+
(zinc plated)
Hex Head
Washer
Diameter and length
identication mark
Serrated Underside