Use and Care Manual

Caps & Bases
87
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Caps & Bases
MiTek
®
Product Catalog
EBG / EPB / EPBH Elevated Post Bases
These post bases allow installers to pre-align posts and
preset post heights above concrete oors or footings. By
eliminating post-to-concrete contact, moisture damage
is reduced. Elevated post bases are ideal for building
carports, decks or porches. All series feature convenient
nail fastening to post.
Materials: See chart
Finish: EPB – Primer;
EBG44-TZ – G-185 galvanizing;
EPBH – Hot-dip galvanized
Options: See chart for Corrosion Finish Options
Codes: See chart for code references
IRC R317.1.4, IBC 2304.11.2.7, IRC R407.3, IBC 2304.9.7.
Installation:
• Use all specied fasteners. See Product Notes, page 18.
• Not recommended for fence post or other xed
post applications. These anchors are not designed
to resist overturning (moment) loads.
Ref. No. W L H1 H2 Qty Nail
EBG44-TZ EPB44A 14 16 3-9/16 2-3/4 2-3/8 7-1/2 8
16d
HDG
4615 1085 1440 1295 800 1010 905
EPB4408
EPB44,
EPB44-12
12 -- 3-9/16 3 3 8 8 16d 3045 1110 1440 1295 775 1010 905
EPBH44 -- 12 -- 3-1/2 3-3/8 2-3/4 7 4
16d
HDG
2485 990 990 975 990 845 845 --
4 x 6 EPB4608
EPB46,
EPB46-12
12 -- 3-9/16 5 3 8 12 16d 3045 1110 1440 1295 775 1010 905
IBC,
FL, LA
4 x 6
Rough
EPBH46R -- 12 -- 4-1/8 5-3/8 3 7 4
16d
HDG
4615 990 990 975 990 845 845 --
EPB6608
EPB66,
EPB66-12
12 -- 5-9/16 5 3-3/16 8 12 16d 4665 1110 1440 1295 775 1010 905
IBC,
FL, LA
EPBH66 -- 12 -- 5-1/2 5-3/8 3 7 4
16d
HDG
4615 990 990 975 990 845 845
6 x 6
Rough
EPBH66R -- 12 -- 6-1/8 5-3/8 3 7 4
16d
HDG
4615 990 990 975 990 845 845
EBG44-TZ EPB44A 14 16 3-9/16 2-3/4 2-3/8 7-1/2 8
16d
HDG
4615 1000 1260 1135 700 885 795
EPB4408
EPB44,
EPB44-12
12 -- 3-9/16 3 3 8 8 16d 3045 970 1260 1135 680 885 795
EPBH44 -- 12 -- 3-1/2 3-3/8 2-3/4 7 4
16d
HDG
2485 990 990 975 990 725 725 --
4 x 6 EPB4608
EPB46,
EPB46-12
12 -- 3-9/16 5 3 8 12 16d 3045 970 1260 1135 680 885 795
IBC,
FL, LA
4 x 6
Rough
EPBH46R -- 12 -- 4-1/8 5-3/8 3 7 4
16d
HDG
4615 990 990 975 990 725 725 --
EPB6608
EPB66,
EPB66-12
12 -- 5-9/16 5 3-3/16 8 12 16d 4665 970 1260 1135 680 885 795
IBC,
FL, LA
EPBH66 -- 12 -- 5-1/2 5-3/8 3 7 4
16d
HDG
4615 990 990 975 990 725 725
6 x 6
Rough
EPBH66R -- 12 -- 6-1/8 5-3/8 3 7 4
16d
HDG
4615 990 990 975 990 725 725
1) Lateral loads (F1 and F2) are for conditions where pipe extends no more than 1" above the concrete surface.
2) Uplift Loads have been increased 60% for wind and seismic loads; no further increase shall be permitted.
3) Concrete compressive strength shall be 2,500 psi or greater at 28 days.
4)
NAILS:
16d nails are 0.162" dia. x 3-1/2" long.
Dimensions (in)
DF/SP Allowable Loads (Lbs.)
3
Tube
Wind and ASCE Seismic Design A & B
Corrosion
Finish
Post
Size
Code
Ref.
MiTek
Stock No.
Fastener
Schedule
4
Uncracked Concrete
Base
Steel
Gauge
Cracked Concrete
Download
100%
Uplift
2
160%
F1
1
160%
F2
1
160%
Uplift
2
160%
F1
1
160%
F2
1
160%
6 x 6
4 x 4
6 x 6
4 x 4
ASCE Seismic Design C-F
IBC,
FL,
LA
IBC,
FL,
LA
--
--
EPBH
EBG44-TZ
Typical EPBH
installation
Typical EBG44-TZ
installation
EPB
Typical EPB
installation
Corrosion Finish
Stainless Steel Gold Coat
HDG Triple Zinc
Corrosion Finish Stainless Steel Gold Coat HDG Triple Zinc
Corrosion
Finish
Stainless Steel
Gold Coat
HDG
Triple Zinc
W
H1
L
H2
W
H1
L
H2
W
H1
L
H2
1" max.
elevation
1.5 x H
2
(typical for
all edges)
F1
F1
F2
F2
Uplift
Download
F1
F1
F2
F2
Uplift
Download