Use and Care Manual

ManualsBrandsMiTek ManualsBuilding Hardware2 x 8 G185 18-Gauge Slant Nail Face Mount Joist Hanger (32-Pack)

221

222

223

224

225

226

227

228

229

230

EWP Hangers

215

MiTek

Product Catalog

EWP Hangers

SCL Charts Face Mount Hangers

Dimensions (in)

Ref. No. W H D A Qty Type Qty Type 100% 115% 125% 100% 115% 125%

Min 18 8 2770 3125 3355

1510

2440 2750 2950

1210

Max 26 12 4005 4435 4435 1900 3520

3935 3935

1530

THDH2714 -- x 12 2-3/4 12-1/4 4 2-1/2 -- 66 16d 16 16d 11185

11325 11325 5290

8530 9045

9115 4260

Min 14 6 2155 2430 2610 1170 1895 2140 2295 1030

Max 20 10 3080 3475

3725

1950 2710

3055 3190

1715

HDQ410IF HUCQ410-SDS x 14 3-9/16 9 3 1-1/2 -- 12 WS3 6 WS3 5015 5590 5590 2975 4670 4900 4900 2865

THD410 HHUS410 x 14 3-5/8 9-1/16 3 2 -- 38 16d 20 10d 5850 6600 7045 3905

5145 5680 5680 3255

THDH410 HGUS410 x 12

3-5/8 9-1/16

4 2-1/2 -- 46 16d 12 16d 9020 9020 9020

4345 7820 7820 7820 3470

Min 16 8 2465 2780 2980 1305 2165 2445 2620 1040

Max 24 12 3695 4170 4470 2340 3250 3665 3860 2060

HDQ412IF HUCQ412-SDS x 14 3-9/16 11 3 1-1/2 -- 14 WS3 6 WS3 5605 5605 5605 3280 4980 4980 4980 2775

THD412 -- x 14 3-5/8 11 3 3 -- 48 16d 20 10d 7045 7045 7045 3905 5680 5680 5680

3255

THDH412 HGUS412 x 12

3-5/8 11-1/16

4 2-1/2 -- 56 16d 14 16d 9710 9710 9710

5290

7765 7765 7765

4230

Min 18 8 2770 3125 3355

1510

2440 2750 2950

1205

Max 26 12 4005 4515 4815 2340 3520 3860 3860 2060

THD414 -- x 14 3-5/8 12-7/8 3 3 -- 58 16d 20 10d 7045 7045 7045 3905 5680 5680 5680

3255

THDH414 HGUS414 x 12

3-5/8

13-1/16 4 2-1/2 -- 66 16d 16 16d

11325 11325 11325 5305 9075 9075 9075 4250

Min 22 10 3390 3820 4100 1950 2980 3360 3605 1715

Max 30 14 4620

4990 4990

2245

4015 4015 4015

1805

3-1/2 x 18 - 26 HD418 -- x 14 3-9/16 16-1/2 2-1/2 1-1/8 -- 28 16d 8 10d 4310 4815 4815 1560 3795 3835 3835 1375

Min 14 6 2155 2430 2610 1305 1895 2140 2295 1035

Max 20 10 3080 3475 3725 2305 2710 3055 3275 2025

HDQ5210IF HUCQ5.25/9-SDS x 14 5-1/4 9 3 1-1/2 -- 12 WS3 6 WS3 5015 5590 5590 2975 4670 4890 4890 2855

THD610 HHUS5.50/10 x 12 5-1/2 9 3 3 -- 38 16d 20 10d 6535 7255 7745

4035

5750 6380

6630 3230

THDH610

HGUS5.25/10,

HGUS5.50/10

x 12 5-1/2 9 4 2-1/2 -- 46 16d 16 16d 9020 9020 9020

5290 7805 7805 7805 4210

1) Uplift loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.

2) WS3 structural wood screws are 1/4" dia. x 3" long and are included with HDQ hangers.

3) NAILS: 10d x 1-1/2 nails are 0.148" dia. x 1-1/2" long, 10d nails are 0.148" dia. x 3" long, 16d nails are 0.162" dia. x 3-1/2" long.

Load tables address hanger/header/fastener limitations only. Joist limitations must be determined for each installation.

New products or updated product information are designated in blue font.

1-1/8

Code

Ref.

Web

Stiff

Reqd Ga

Fastener Schedule

2,3

DF/SP Header

Allowable Loads (Lbs.)

S-P-F Header

Allowable Loads (Lbs.)

Header Joist

Corrosion

Finish

Joist Size

(in)

MiTek USP

Stock No.

Min/

Max

Uplift

160%

Uplift

160%

10d HD416 -- x 14 3-9/16 14-13/16 2-1/2

3-1/2 x

9-1/4 - 14

HD410 -- x 14

2-11/16 x

14 - 16

HD2714 HU2.75/14 x 14

IBC,

FL,

2-3/4

2-1/2 16d 10d

3-9/16 16d 10d

13-3/16 2-1/2 16d 10d x 1-1/2

3-9/16 8-13/16

16d

HD414 x

3-1/2 x

11-1/4 - 16

HD412 -- x

2-1/2 16d 10d14 3-9/16

3-1/2 x 16 - 22

10-13/16 2-1/2

5-1/4 x

9-1/4 - 11-7/8

16d16d HD5210 -- x 14 5-3/8 7-7/8 2-1/2

3-1/2 x 14 - 20

12-13/16

Corrosion Finish

Stainless Steel Gold Coat

HDG Triple Zinc

Corrosion Finish

Stainless Steel Gold Coat HDG Triple Zinc

Corrosion

Finish

Stainless Steel

Gold Coat

HDG

Triple Zinc

Continued on next page