Use and Care Manual
220
MiTek
®
Product Catalog
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
EWP Hangers
EWP Hangers
PHM / PHXU Top Flange Hangers
Typical PHXU
installation
PHXU
PHM
Nailer Options
– chart represents maximum allowable loads for hangers used on wood nailers. Reference page 203.
Specialty Options Chart
– refer to Specialty Options pages 320, 322-323 for additional details.
Used to connect LVL, LSL, and PSL beams to headers in medium
load conditions using standard nails.
Materials: See EWP Top Mount Hangers charts, pages 221-229
Finish: Primer; PHXU – G90 galvanizing
Codes: IBC, FL, LA
Patents: U.S. Patent No. 6,463,711 B1 – PHXU
Installation:
• Use all specied fasteners. See Product Notes, page 18.
• For welded installations, see page 325.
Fastener Schedule
5
Uplift Uplift
Type Qty Type 160% 160%
2X 2 -- 10d x 1-1/2 2 10d x 1-1/2 3010 -- 2140 --
3X 2 -- 16d x 2-1/2 2 10d x 1-1/2 3060 -- 2140 --
(2) 2X 2 -- 10d 2 10d x 1-1/2 3060 -- 2140 --
4X 2 -- 16d 2 10d x 1-1/2 3060 -- 2140 --
2X 4 -- 10d x 1-1/2 6 10d x 1-1/2 2585 -- 2170 --
3X 4 2 16d x 2-1/2 6 10d x 1-1/2 3855 -- 3150 --
(2) 2X 4 2 10d 6 10d x 1-1/2 3590 -- 3015 --
4X
3
4 4 16d 6 10d x 1-1/2
4420
3
870 3150 730
2X 4 -- 10d x 1-1/2 6 10d 2765 -- 2325 --
3X 4 2 16d x 2-1/2 6 10d 3895 -- 3270 --
(2) 2X 4 2 10d 6 10d 3785 -- 3180 --
4X 4 4 16d 6 10d x 1-1/2 5285 970 4545 835
4X 4 4 16d 6 10d 5285 1120 4545 940
1) Listed loads shall not be increased.
2) Loads valid for hanger height ≤ 20". For hanger height ≥ 22", consult MiTek Engineering.
3) PHXU hangers with a width of less than 2-3/4" on 4x nailers are 4,350 lbs of download.
4)
Values in the table apply to standard top mount hangers without slope, skew or any other specialty options.
5)
NAILS:
10d x 1-1/2 nails are 0.148" dia. x 1-1/2" long, 10d nails are 0.148" dia. x 3" long,
16d nails are 0.162" dia. x 3-1/2" long, 16d x 2-1/2 nails are 0.162" dia. x 2-1/2" long.
New products or updated product information are designated in
blue font
.
PHXU
3
widths < 3-1/2"
PHXU
2
widths > 3-1/2"
SPF
Allowable Loads (Lbs.)
1,4
PHM
Nailer Joist
MiTek
Series
Nailer
Size
DF/SP
Allowable Loads (Lbs.)
1,4
Top
Qty
Face
Qty
Download
100%
Download
100%
Option
Skewed
1,3,5
Sloped Seat
2,3
Sloped / Skewed
1,2,3
Sloped Top Flange
4
Saddle
5,6
Ridge
PHM 1˚ to 84˚ 0˚ to 45˚
PHXU 1˚ to 60˚ N/A
1) Skewed hangers with skews greater than 15° may have all joist nailing on outside flange.
2) Sloped or sloped/skewed hangers with slopes greater than 15° may have additional joist nails.
3) For skewed hangers, the required cut type (square or bevel) of joist member may vary based on skew angle
and width of hanger. Some square cut hangers will require custom pricing due to welded back plate.
4) Sloped top flanges with slopes greater than 15° may have additional header nails.
5) Skewed, top flange offset, or saddle options will have a solid, welded top flange.
6) Minimum header thickness shall be double the top flange (TF) dimension for 100% table load.
Range
Allowable
Loads
Add
SK
, angle required,
right
(R)
or left
(L)
, and
square cut
(SQ)
or
bevel cut
(BV)
to
product number.
Ex:
PHXU1795_SK45R_SQ
Ordering
PHM
100% of table load
PHM
PHXU
100% of table load.
See footnote 6.
Add
OS,
and
right
(R)
or left
(L),
to product number.
Ex:
PHXU1795_OSL
Add
SL,
slope
required,
and up
(U)
or
down
(D),
to
product number.
Ex:
PHXU1795_SL30D
See Sloped Seat
and Skewed.
Ex:
PHXU1795_SK45R_SQ_SL30D
Add
SF,
angle required,
and right
(R)
or left
(L),
to product number.
Ex:
PHXU1795_SF30L
100% of table load
100% of table load up to
Max. load of 3900 lbs.
% of
table load
MiTek
USP
Series
Hanger Width
3-1/2" or less
3-9/16" to 5-1/2"
5-9/16" to 7-1/2"
60%
75%
85%
Add
DA,
and
angle required to
product number.
Ex. PHXU1795_DA30
N/A
Top Flange Offset
5
See Sloped Seat
and Skewed
--0° to 35° --1˚ to 45˚
Add
SA,
and saddle
width required
to product number.
Ex:
PHXU1795_SA=5-1/2"
100% of
table load
100% of
table load
100% of table load up to
Max. load of 2500 lbs.
PHXU
L
D
W
H
TF
L
D
W
TF
H